Metal–organic frameworks as affinity agents to enhance the microdialysis sampling efficiency of fatty acids

Literature Information

Publication Date 2018-03-26
DOI 10.1039/C8AN00238J
Impact Factor 4.616
Authors

Yangyang Zhang, Zhenpeng Wang


View Original

Abstract

Microdialysis (MD) has been extensively used for in vivo sampling of hydrophilic analytes such as neurotransmitters and drug metabolites. In contrast, there have been few reports on sampling of lipophilic analytes by MD. Lipophilic analytes are easily adsorbed on the surfaces of the dialysis membrane and the inner wall of tubing, which leads to a very low relative recovery (RR). In this work, a strategy to develop an enhanced MD sampling of fatty acids (FAs) by using metal–organic frameworks (MOFs) as affinity agents in the perfusion fluid was investigated. Two MOFs, MIL-101 and ZIF-8, were synthesized and tested for the first time. A 2 times higher RR, about 70% RR, was obtained. The FT-IR experiment showed that the unsaturated metal sites in MOFs could coordinate with FAs, therefore the FAs were encapsulated into MOFs, avoiding FAs to be absorbed on the surfaces of the dialysis membrane and the inner wall of tubing. Moreover, incorporation of FAs into MOFs led to a decrease of free concentration of FAs inside the MD membrane and an increase of concentration gradient, allowing more FAs to diffuse across the membrane. Consequentially, an enhanced RR was obtained. The approach was successfully used to monitor the time profile of targeted FAs in cell culture media after lipopolysaccharide (LPS)-induced inflammation.

Related Literature

Back cover

Front/Back Matter

DOI: 10.1039/B706110M

Asymmetric aldol reactions under normal and inverse addition modes of the reagents

Saumen Hajra, Aswini Kumar Giri, Ananta Karmakar, Snehadrinarayan Khatua

2007-03-09 Communication

DOI: 10.1039/B618699H

Collagen fiber immobilized Fe(iii): a novel catalyst for photo-assisted degradation of dyes

Rui Tang, Xue-Pin Liao, Xin Liu, Bi Shi

2005-10-20 Communication

DOI: 10.1039/B512184A

Creation of quaternary stereocenters in carbonyl allylation reactions

Ilan Marek, Genia Sklute

2006-12-06 Feature Article

DOI: 10.1039/B615042J

Enantioselectivity in the boron aldol reactions of methyl ketones

Jonathan M. Goodman, Robert S. Paton

2007-05-01 Communication

DOI: 10.1039/B704786J

Cross-metathesis of unsaturated natural oils with 2-butene. High conversion and productive catalyst turnovers

Jim Patel, Jomana Elaridi, W. Roy Jackson, Andrea J. Robinson, Algirdas K. Serelis, Chris Such

2005-10-05 Communication

DOI: 10.1039/B511626K

Poly(ethylene glycol) stabilized Co nanoparticles as highly active and selective catalysts for the Pauson–Khand reaction

Jean-Luc Muller, Jürgen Klankermayer

2007-04-11 Communication

DOI: 10.1039/B702330H

Dependence of enzyme reaction mechanism on protonation state of titratable residues and QM level description: lactate dehydrogenase

Silvia Ferrer, Estanislao Silla, Iñaki Tuñón, Mónica Oliva, Vicent Moliner, Ian H. Williams

2005-10-14 Communication

DOI: 10.1039/B510735K

Photocrosslinked nitroxide polymer cathode-active materials for application in an organic-based paper battery

Takeo Suga, Hiroaki Konishi, Hiroyuki Nishide

2007-02-12 Communication

DOI: 10.1039/B618710B

A high-performance selective oxidation system for the facile production of fine chemicals

Robert Raja, John Meurig Thomas, Mike Greenhill-Hooper, Violeta Doukova

2007-04-19 Communication

DOI: 10.1039/B618090F

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.