Chlorine-induced degradation in SOFCs operating with biogas

Literature Information

Publication Date 2017-05-05
DOI 10.1039/C7SE00156H
Impact Factor 6.367
Authors

K. W. Reeping, J. A. Bohn


View Original

Abstract

Experiments described in this work examine degradation mechanisms of nickel-based anodes in solid oxide fuel cells (SOFCs) operating with a biogas surrogate and exposed to 110 ppm Cl (delivered either as CH3Cl or HCl). Chlorine present in green and synthetic fuels such as biogas and syngas can accelerate degradation of high temperature nickel anodes. Chlorine contamination has been studied in SOFCs where H2 was the primary fuel but little attention has focused on deleterious, cooperative effects that result from Cl-contamination in predominantly carbon containing fuels. Operando Raman spectroscopy is used to directly observe the anode's catalytic activity as evidenced by observable carbon accumulation, and electrochemical impedance and voltammetry measurements report on overall cell performance. Studies performed at 650 째C and 700 째C show that Cl immediately suppresses carbon accumulation and causes slow but steady cell degradation. Prolonged exposure to Cl results in abrupt and irreversible device failure. These results differ markedly from recent reports of Cl contamination in SOFCs operating independently with H2 and CH4.

Related Literature

Mechanically strong and tough hydrogels with pH-triggered self-healing and shape memory properties based on a dual physically crosslinked network

Tao Liu, Shaoshuang Zou, Chen Hang, Jian Li, Xiang Di, Xiaohui Li, Qiang Wu, Fenfen Wang

2020-01-27 Paper

DOI: 10.1039/C9PY01862J

Hydrogen-bond-driven supramolecular self-assembly of diacetylene derivatives for topochemical polymerization in solution

Jianqiang Fan, Xiao Xu, Wei Yu, Zhihong Wei, Dengqing Zhang

2020-01-28 Paper

DOI: 10.1039/C9PY01745C

Back cover

Cover

DOI: 10.1039/D0PY90039G

Epoxy vitrimers incorporating physical crosslinks produced by self-association of alkyl chains

F. I. Altuna, U. Casado, I. E. dell'Erba, L. Luna, C. E. Hoppe, R. J. J. Williams

2020-01-06 Paper

DOI: 10.1039/C9PY01787A

Dual-catalytic depolymerization of polyethylene terephthalate (PET)

Kayla R. Delle Chiaie, Fergus R. McMahon, Esme J. Williams, Matthew J. Price, Andrew P. Dove

2020-02-17 Communication

DOI: 10.1039/C9PY01920K

Anionic polymerization of acrylic thioester by using organic base

Masato Suzuki, Takumi Kaneko, Yuna Ishikawa, Shin-ichi Matsuoka

2019-12-19 Paper

DOI: 10.1039/C9PY01621J

Precise polyethylene derivatives bearing mesogenic side-chains: delicate self-assembly depending on graft density

Wen-Ying Chang, Dong Shi, Xu-Qiang Jiang, Jia-Di Jiang, Yang Zhao, Xiang-Kui Ren, Shuang Yang, Er-Qiang Chen

2020-01-06 Paper

DOI: 10.1039/C9PY01856E

You might also like

Compound Q&A

Is 4-Benzyl-2,2-dimethylmorpholine (CAS: 84761-04-6) safe?

4-Benzyl-2,2-dimethylmorpholine is generally considered safe when handled under ...

84761-04-64-Benzyl-2,2-dimethy...
Compound Q&A

What is (5,6-Dimethoxy-3-pyridinyl)boronic acid (CAS: 1346526-61-1)?

(5,6-Dimethoxy-3-pyridinyl)boronic acid is a chemical compound with the molecula...

1346526-61-1(5,6-Dimethoxy-3-pyr...
Compound Q&A

How is 1,1,3,3-Tetramethyl-1,3-bis(2-methyl-2-propanyl)disiloxane (CAS: 67875-55-2) typically synthesized?

1,1,3,3-Tetramethyl-1,3-bis(2-methyl-2-propanyl)disiloxane is synthesized throug...

67875-55-21,1,3,3-Tetramethyl-...
Compound Q&A

What are the main uses of (2R,4S)-1-Boc-4-methylpyrrolidine-2-carboxylic acid (CAS: 1018818-04-6)?

(2R,4S)-1-Boc-4-methylpyrrolidine-2-carboxylic acid is primarily used as a build...

1018818-04-6(2R,4S)-1-Boc-4-meth...
Compound Q&A

What precautions should be taken when handling 2,3-Dichloroacrylonitrile (CAS: 22410-58-8)?

When handling 2,3-Dichloroacrylonitrile, it is crucial to wear appropriate perso...

22410-58-82,3-Dichloroacryloni...
Compound Q&A

How should (S)-1-(o-Tolyl)ethanamine hydrochloride (CAS: 1332832-16-2) be stored?

(S)-1-(o-Tolyl)ethanamine hydrochloride should be stored in a cool, dry place to...

1332832-16-2(S)-1-(o-Tolyl)ethan...
Compound Q&A

What are the physical and chemical properties of Benzyl [1-(hydroxyamino)-1-imino-2-methyl-2-propanyl]carbamate (CAS: 518047-98-8)?

Benzyl [1-(hydroxyamino)-1-imino-2-methyl-2-propanyl]carbamate (CAS: 518047-98-8...

518047-98-8Benzyl [1-(hydroxyam...
Compound Q&A

What industries use 2-Methyloxazole-5-carbaldehyde (CAS: 885273-42-7)?

2-Methyloxazole-5-carbaldehyde is used in the pharmaceutical industry for the sy...

885273-42-72-Methyloxazole-5-ca...
Compound Q&A

What is the market or research trend for 2-Methyl-2-propanyl 4-[(1S)-1-hydroxyethyl]-1-piperidinecarboxylate (CAS: 389889-82-1)?

The market for 2-Methyl-2-propanyl 4-[(1S)-1-hydroxyethyl]-1-piperidinecarboxyla...

389889-82-12-Methyl-2-propanyl ...
Compound Q&A

Is 1-Butyl-3-methylpyridinium bromide (CAS: 26576-85-2) safe?

1-Butyl-3-methylpyridinium bromide is generally considered safe for laboratory u...

26576-85-21-Butyl-3-methylpyri...
Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.