The effect of Mg2+ incorporation on the structure of calcium carbonate clusters: investigation by the anharmonic downward distortion following method

Literature Information

Publication Date 2015-12-09
DOI 10.1039/C5CP05139H
Impact Factor 3.676
Authors

Satoshi Maeda, Takaya Nagai


View Original

Abstract

Mg2+ is considered to play an important role in the formation of calcium carbonate polymorphs; however, how it affects polymorph selection during the early stages of CaCO3 formation is not yet well understood. In the present study, in order to clarify the effect of Mg2+ on the nucleation of calcium carbonate polymorphs, the stable structures of anhydrous additive-free and Mg-containing calcium carbonate clusters are derived using the anharmonic downward distortion following method, based on quantum chemical calculations. Optimization is performed at the B3LYP/6-31+G(d) level and the solvent effect is induced by the self-consistent reaction field method using the conductor-like polarized continuum calculation model. Calculation results show that incorporating Mg2+ into clusters can change the clusters’ stable configuration. In the case of dimers and trimers, a Mg ion strongly prefers to locate at the centre of the clusters, which suggests that Mg is easy to incorporate into the clusters once it is released from its tight hydration shell. Notably, structures similar to the crystalline phase appear when only four CaCO3 units aggregate into the cluster: in the stable structure of the additive-free CaCO3 tetramer, the arrangement of Ca and CO3 ions is almost the same as that of the calcite structure, while the structure of the Mg-containing CaCO3 tetramer resembles the aragonite structure in the way that CO3 ions are stacked. These results indicate that Mg can play a key role in aragonite formation not only by inhibiting calcite growth but also by directly promoting aragonite nucleation in the early stages of CaCO3 formation.

Related Literature

Amyloid-β–neuropeptide interactions assessed by ion mobility-mass spectrometry

Molly T. Soper, Alaina S. DeToma, Suk-Joon Hyung, Brandon T. Ruotolo

2013-04-15 Paper

DOI: 10.1039/C3CP50721A

Atomic and electronic structure of molybdenum carbide phases: bulk and low Miller-index surfaces

Francesc Viñes, Jose A. Rodriguez, Francesc Illas

2013-05-29 Paper

DOI: 10.1039/C3CP51389K

Back cover

Cover

DOI: 10.1039/C3CP90098C

Excitation energies of a water-bridged twisted retinal structure in the bacteriorhodopsin proton pump: a theoretical investigation

Tino Wolter, Kai Welke, Prasad Phatak, Ana-Nicoleta Bondar, Marcus Elstner

2013-05-24 Paper

DOI: 10.1039/C3CP44280B

Orbital-based insights into parallel-displaced and twisted conformations in π–π interactions

Patricia B. Lutz, Craig A. Bayse

2013-03-21 Paper

DOI: 10.1039/C3CP51077H

Linking electronic and molecular structure: insight into aqueous chloride solvation

Ling Ge, Leonardo Bernasconi, Patricia Hunt

2013-05-31 Paper

DOI: 10.1039/C3CP50652E

Antioxidant activity of propyl gallate in aqueous and lipid media: a theoretical study

Manuel E. Medina, Cristina Iuga, Juan Raúl Alvarez-Idaboy

2013-06-04 Paper

DOI: 10.1039/C3CP51644J

High energy X-rays and the frontiers of materials chemistry

2013-05-09 Editorial

DOI: 10.1039/C3CP90046K

Alzheimer's disease: which type of amyloid-preventing drug agents to employ?

Hyunbum Jang, Laura Connelly, Fernando Teran Arce, Srinivasan Ramachandran, Ratnesh Lal, Bruce L. Kagan

2013-02-21 Perspective

DOI: 10.1039/C3CP00017F

Molecular interactions of Alzheimer amyloid-β oligomers with neutral and negatively charged lipid bilayers

Xiang Yu, Qiuming Wang, Qingfen Pan, Feimeng Zhou, Jie Zheng

2013-02-13 Paper

DOI: 10.1039/C3CP44448A

You might also like

Compound Q&A

What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?

1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...

141290-59-71H-Indazole-6-carbon...
Compound Q&A

How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?

Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...

2997-85-5Dioctyl (2E)-2-buten...
Compound Q&A

What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?

Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...

68291-98-5Sodium [(1,2-benzoxa...
Compound Q&A

Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?

Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...

741709-66-0Dimethyl 4-(4,4,5,5-...
Compound Q&A

How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?

Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...

80714-39-22-Fluoro-6-hydrazino...
Compound Q&A

What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?

6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...

499214-11-86-Formyl-2-pyridinec...
900874-91-13-(3,4-dimethoxyphen...
Compound Q&A

How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?

9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...

29875-73-89H-Tribenzo[b,d,f]az...
Compound Q&A

How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?

1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...

1797982-51-41-Cyclopropyl-7-etho...
Compound Q&A

How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?

Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...

671820-52-3Methyl 3-oxo-1,2,3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.