Modulation of the aggregation properties of sodium deoxycholate in presence of hydrophilic imidazolium based ionic liquid: water dynamics study to probe the structural alteration of the aggregates

Literature Information

Publication Date 2015-09-01
DOI 10.1039/C5CP03906A
Impact Factor 3.676
Authors

Niloy Kundu, Debasis Banik, Arpita Roy, Jagannath Kuchlyan, Nilmoni Sarkar


View Original

Abstract

In this article, we have investigated the effect of a hydrophilic ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]-BF4), on the aggregation properties of a biological surfactant, sodium deoxycholate (NaDC), in water. In solution, unlike conventional surfactants it shows stepwise aggregation and the effect of the conventional ionic liquid on the aggregation properties is rather interesting. We have observed concentration dependent dual role of the ionic liquid; at their low concentration, the aggregated structure of NaDC reorganizes itself into an elongated rod like structure. However, the aggregated network is disintegrated into small aggregates upon further addition of ionic liquid. TEM (Transmission Electron Microscopy), SEM (Scanning Electron Microscopy) and FLIM (Fluorescence Lifetime Imaging Microscopy) images also confirmed the structural alteration of NaDC upon varying the concentration of the ionic liquid. The proton NMR data indicate that hydrophobic as well as electrostatic interaction is solely responsible for such structural adaptation of NaDC in the presence of an ionic liquid. The host–guest interaction inside the aggregates is monitored using Coumarin-153 (C-153) and the location of C-153 is probed by varying the excitation wavelength from 375 nm to 440 nm and the two binding sites of the aggregates are affected in a different fashion in the presence of ionic liquid. Excitation in the blue region selects the fluorophores which preferably bind to the buried region of the aggregates, whereas 440 nm excitation corresponds to the guest molecules which are exposed to the solvent molecules. The average solvation time of C-153 is increased in the presence of 1.68 wt% [bmim]-BF4 at λexc = 440 nm i.e. the probe molecules relocate themselves to a more restricted region. However, the average solvation time became 2.6 times faster in the presence of 11.2 wt% [bmim]-BF4, which corresponds to a more polar and exposed region. The time resolved anisotropy measurements and polarity determined by pyrene also supported our results in addition to solvation dynamics measurements. In summary, ionic liquids can modulate the host–guest interaction of bile salt aggregates, which can be used as nanocarriers for drug delivery.

Related Literature

Towards resource efficient chemistry: tandem reactions with renewables

Arno Behr, Andreas J. Vorholt, Karoline A. Ostrowski, Thomas Seidensticker

2013-11-29 Critical Review

DOI: 10.1039/C3GC41960F

Eco-footprint: a new tool for the “Made in Chimex” considered approach

Lucie Leseurre, Cécilia Merea, Sébastien Duprat de Paule, Alain Pinchart

2013-12-11 Communication

DOI: 10.1039/C3GC42201A

Solvent-free γ-valerolactone hydrogenation to 2-methyltetrahydrofuran catalysed by Ru/C: a reaction network analysis

Mohammad G. Al-Shaal, Adam Dzierbinski, Regina Palkovits

2013-12-12 Paper

DOI: 10.1039/C3GC41803K

Biodegradability of 27 pyrrolidinium, morpholinium, piperidinium, imidazolium and pyridinium ionic liquid cations under aerobic conditions

Jennifer Neumann, Stephanie Steudte, Chul-Woong Cho, Jorg Thöming

2014-01-15 Paper

DOI: 10.1039/C3GC41997E

Hydroxymethylfurfural production from bioresources: past, present and future

Siew Ping Teong, Guangshun Yi, Yugen Zhang

2014-01-24 Perspective

DOI: 10.1039/C3GC42018C

Water at elevated temperatures (WET): reactant, catalyst, and solvent in the selective hydrolysis of protecting groups

Wilmarie Medina-Ramos, Mike A. Mojica, Elizabeth D. Cope, Ryan J. Hart

2014-02-04 Paper

DOI: 10.1039/C3GC42569J

Cobalt-modified molybdenum carbide as an efficient catalyst for chemoselective reduction of aromatic nitro compounds

Zhongkui Zhao, Hongling Yang, Yu Li, Xinwen Guo

2013-11-08 Paper

DOI: 10.1039/C3GC42049C

You might also like

Compound Q&A

What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?

When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...

40716-16-34-Methyl-6-(trifluor...
Compound Q&A

What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?

4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...

405058-00-64-(3,5-Difluoropheny...
Compound Q&A

How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?

5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...

338982-07-35-{[4-(Trifluorometh...
Compound Q&A

What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?

The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...

6317-57-34-Benzylaniline hydr...
Compound Q&A

Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?

[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...

871329-58-7[3-(Diethylsulfamoyl...
Compound Q&A

What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?

3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...

115929-62-93-Bromo-2,5-dimethox...
Compound Q&A

What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?

N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...

915922-67-7N-Methyl-1-(5-methyl...
Compound Q&A

What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?

This compound is primarily used in the pharmaceutical industry for the synthesis...

24828-96-4Carbamic acid, N-[(5...
Compound Q&A

How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?

2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...

1298101-47-92-Methyl-2-propanyl ...
Compound Q&A

What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?

Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...

367-33-9Ethyl 2-bromo-4,4,4-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.