Functional fluorescent aramids: aromatic polyamides containing a dipicolinic acid derivative as luminescent converters and sensory materials for the fluorescence detection and quantification of Cr(vi), Fe(iii) and Cu(ii)
Literature Information
José Luis Barrio-Manso, Patricia Calvo, Félix Clemente García, Jesús Luis Pablos, Tomás Torroba, José Miguel García
This work describes the preparation of luminescent, high-performance aromatic polyamides. The fluorescent behaviour was achieved by preparing a diacid monomer containing a fluorescent dipicolinic acid derivative and polymerising it with commercially available aromatic diacid and diamine monomers to give polyisophthalamides. These materials can be structurally compared to commercialised meta-aramid fibres [poly(m-phenylene isophthalamide), brand names: NOMEX® and Teijinconex®]. The pendant fluorescent motif provided the material with a light green fluorescence and was found to be a selective host unit for cations of environmental, biomedical and industrial significance [Cr(VI), Fe(III) and Cu(III)].
Related Literature
Reply to the ‘Comment on “A new equation of state based on Grover, Getting and Kennedy’s empirical relation between volume and bulk modulus. The high-pressure thermodynamics of MgO”’ by S. Raju, E. Mohandas and K. Sivasubramanian, Phys. Chem. Chem. Phys., 2001, 3, 1391
M. H. G. Jacobs, H. A. J. Oonk
DOI: 10.1039/B101037I
The role of intersystem crossing in the deactivation of the singlet excited aminofluorenones
László Biczók, Tibor Bérces, Tomoyuki Yatsuhashi, Hiroshi Tachibana, Haruo Inoue
DOI: 10.1039/B009860O
Formation and partial self-healing of lattice defects during thermal treatments of GaZSM-5: An FTIR study using CO as a probe molecule
C. Otero Areán, B. Bonelli, G. Turnes Palomino, A. M. Canaleta Safont, E. Garrone
DOI: 10.1039/B008558H
Molecular adsorption on the quasi-one-dimensional c(2 × 2)-Br/Pt(110) surface
C. Deisl, K. Swamy, S. Penner, E. Bertel
DOI: 10.1039/B007770O
Rate constants for H and OH attack on propanone, butanone and pentan-3-one at 753 K, and the oxidation chemistry of the radicals formed
R. S. Tranter, R. W. Walker
DOI: 10.1039/B009378P
Surface characterization of alumina-supported catalysts prepared by sol–gel method. Part II.—Surface reactivity with CO
Emmanuel Joubert, Jean-Christophe Ménézo, Daniel Duprez, Jacques Barbier, Nicolas Bion, Marco Daturi, Jacques Saussey, Jean-Claude Lavalley, Hideaki Hamada
DOI: 10.1039/B009956M
Theoretical investigation of the photoelectron spectra of the vinylidene anions
Rainer Schork, Horst Köppel
DOI: 10.1039/B009735G
Experimental and simulation studies of the electron transfer reaction between [Ru(NH3)5pz]2+ and [Co(C2O4)3]3−
Pilar Pérez-Tejeda, Francisco-Javier Franco, Antonio Sánchez, Manuel Morillo, Claus Denk, Francisco Sánchez
DOI: 10.1039/B009004M
Comment on “A new equation of state based on Grover, Getting and Kennedy’s empirical relation between volume and bulk modulus. The high pressure thermodynamics of MgO ” by M. H. G. Jacobs and H. A. J. Oonk, Phys. Chem. Chem. Phys., 2000, 2, 2641
K. Sivasubramanian
DOI: 10.1039/B009587G
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














