A facile and highly efficient strategy for esterification of poly(meth)acrylic acid with halogenated compounds at room temperature promoted by 1,1,3,3-tetramethylguanidine
Literature Information
Qianbiao Li, Yinyin Bao, Hu Wang, Fanfan Du, Qing Li, Bangkun Jin, Ruke Bai
Esterifications of poly(methacrylic acid) (PMAA) and poly(acrylic acid) (PAA) have been investigated with a wide variety of halogenated compounds such as iodide, bromide, and chloride using 1,1,3,3-tetramethylguanidine as a promoter. The results demonstrate that the poly(meth)acrylates can be obtained with an excellent degree of esterification at room temperature. The influence of solvent, reaction conditions, and halogenated compounds on the esterification reaction was examined. It was found that polar solvents, such as dimethyl sulfoxide (DMSO) and N,N-dimethylformamide (DMF), are favorable for the esterification and high degree of esterification can be achieved in a short time. Moreover, the esterification reaction of PMAA has been successfully performed in an aqueous solution of DMSO, which indicates that the solvent does not necessarily have to be dried for this reaction. Primary and secondary halogenated compounds can successfully react with PMAA or PAA, while tertiary halogenated compounds fail to react. In addition, combining this esterification reaction with atom transfer radical polymerization (ATRP), macromonomers were conveniently prepared by the reaction of halogen-capped polymers with methacrylic acid under mild conditions.
Related Literature
Intracellular pH-sensitive supramolecular amphiphiles based on host–guest recognition between benzimidazole and β-cyclodextrin as potential drug delivery vehicles
Zhe Zhang, Jianxun Ding, Xiaofei Chen, Chunsheng Xiao, Chaoliang He, Xiuli Zhuang, Li Chen, Xuesi Chen
DOI: 10.1039/C3PY00141E
Polymerization behaviors and polymer branching structures in ATRP of monovinyl and divinyl monomers
Hongjun Yang, Xiaoqiang Xue, Bibiao Jiang, Jianhai Chen, Yang Yang, Hongting Pu, Yun Liu, Dongliang Zhang, Lizhi Kong, Guangqun Zhai
DOI: 10.1039/C3PY00338H
Folate-conjugated poly(N-(2-hydroxypropyl)methacrylamide-co-methacrylic acid) nanohydrogels with pH/redox dual-stimuli response for controlled drug release
Yuan-Jia Pan, Dian Li, Sha Jin, Chuan Wei, Ke-Yi Wu, Jia Guo, Chang-Chun Wang
DOI: 10.1039/C3PY00249G
Continuous production of iron oxide nanoparticles via fast and economical high temperature synthesis
Maximilian O. Besenhard, Alec P. LaGrow, Simone Famiani, Martina Pucciarelli, Paola Lettieri, Asterios Gavriilidis
DOI: 10.1039/D0RE00078G
A self-healing supramolecular polymer gel with stimuli-responsiveness constructed by crown ether based molecular recognition
Xuzhou Yan, Donghua Xu, Jianzhuang Chen, Mingming Zhang, Bingjie Hu, Yihua Yu, Feihe Huang
DOI: 10.1039/C3PY00283G
Multifunctional poly(amine-ester)-type hyperbranched polymers: lipase-catalyzed green synthesis, characterization, biocompatibility, drug loading and anticancer activity
Fangli Xu, Jiaren Zhong, Xueqi Qian, Yanyan Li, Xianfu Lin, Qi Wu
DOI: 10.1039/C3PY00156C
Catalytic Y-tailed amphiphilic homopolymers – aqueous nanoreactors for high activity, low loading SCS pincer catalysts
Joseph P. Patterson, Pepa Cotanda, Elizabeth G. Kelley, Adam O. Moughton, Annhelen Lu, Thomas H. Epps, III, Rachel K. O'Reilly
DOI: 10.1039/C3PY21137A
Synthesis of linear amphiphilic tetrablock quaterpolymers with dual stimulus response through the combination of ATRP and RAFT by a click chemistry site transformation approach
Jiucun Chen, Mingzhu Liu, Honghong Gong, Guangjun Cui, Shaoyu Lü, Chunmei Gao, Feng Huang, Tongtong Chen, Xinyu Zhang, Zhen Liu
DOI: 10.1039/C2PY20946B
Pyrroloindacenodithiophene polymers: the effect of molecular structure on OFET performance
Jenny E. Donaghey, Raja Shahid Ashraf, Thomas D. Anthopoulos, Scott E. Watkins, Kigook Song, Charlotte K. Williams, Iain McCulloch
DOI: 10.1039/C3PY00335C
Synthesis of poly(dithienogermole-2,6-diyl)s
Joji Ohshita, Masayuki Miyazaki, Daiki Tanaka, Yasushi Morihara, Yuki Fujita, Yoshihito Kunugi
DOI: 10.1039/C3PY00253E
You might also like
What is 1-(2,4,6-Trifluorophenyl)ethanol (CAS: 1250113-83-7)?
1-(2,4,6-Trifluorophenyl)ethanol is an organic compound with the CAS number 1250...
Is 1-(2,4-Dimethoxybenzyl)-4-(hydroxymethyl)-2-pyrrolidinone (CAS: 919111-34-5) safe?
1-(2,4-Dimethoxybenzyl)-4-(hydroxymethyl)-2-pyrrolidinone (CAS: 919111-34-5) is ...
What are the physical and chemical properties of (7S,15R)-6β,15-Diacetoxy-7α,20-epoxy-7-hydroxykaura-2,16-dien-1-one (CAS: 51419-51-3)?
(7S,15R)-6β,15-Diacetoxy-7α,20-epoxy-7-hydroxykaura-2,16-dien-1-one is a crystal...
What regulatory guidelines apply to rac-ethyl (1r,4r)-4-hydroxycyclohexane-1-carboxylate, trans (CAS: 3618-04-0)?
The compound rac-ethyl (1r,4r)-4-hydroxycyclohexane-1-carboxylate, trans (CAS: 3...
What is the market or research trend for 2-(2,4-Difluorophenoxy)-3-nitropyridine (CAS: 175135-62-3)?
The market for 2-(2,4-Difluorophenoxy)-3-nitropyridine (CAS: 175135-62-3) is cur...
What are the main uses of 6-Diazo-5-oxo-L-norleucine (CAS: 157-03-9)?
The main uses of 6-Diazo-5-oxo-L-norleucine (CAS: 157-03-9) include research in ...
What precautions should be taken when handling 2-Aminoethyl-mono-amide-DOTA-tris(tBu ester) (CAS: 173308-19-5)?
When handling 2-Aminoethyl-mono-amide-DOTA-tris(tBu ester) (CAS: 173308-19-5), i...
How is 5-Methylimidazo[1,2-a]pyridine-3-carbaldehyde (CAS: 178488-37-4) typically synthesized?
5-Methylimidazo[1,2-a]pyridine-3-carbaldehyde (CAS: 178488-37-4) can be synthesi...
Are there alternatives to 2,4,6-Trihydroxyisophthalaldehyde (CAS: 4396-13-8) in synthesis?
There are alternative reagents that can be used in the synthesis of 2,4,6-Trihyd...
What is (2Z)-3-(5-Fluoro-1H-indol-3-yl)-2-sulfanylacrylic acid (CAS: 179461-52-0)?
(2Z)-3-(5-Fluoro-1H-indol-3-yl)-2-sulfanylacrylic acid is a chemical compound wi...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














