Hydration and temperature interdependence of protein picosecond dynamics
Literature Information
Ferdinand Lipps, Seth Levy, A. G. Markelz
We investigate the nature of the solvent motions giving rise to the rapid temperature dependence of protein picoseconds motions at 220 K, often referred to as the protein dynamical transition. The interdependence of picoseconds dynamics on hydration and temperature is examined using terahertz time domain spectroscopy to measure the complex permittivity in the 0.2–2.0 THz range for myoglobin. Both the real and imaginary parts of the permittivity over the frequency range measured have a strong temperature dependence at >0.27 h (g water per g protein), however the permittivity change is strongest for frequencies <1 THz. The temperature dependence of the real part of the permittivity is not consistent with the relaxational response of the bound water, and may reflect the low frequency protein structural vibrations slaved to the solvent excitations. The hydration necessary to observe the dynamical transition is found to be frequency dependent, with a critical hydration of 0.19 h for frequencies >1 THz, and 0.27 h for frequencies <1 THz. The data are consistent with the dynamical transition solvent fluctuations requiring only clusters of ∼5 water molecules, whereas the enhancement of lowest frequency motions requires a fully spanning water network.
Related Literature
Fast polymer fingerprinting using flowing afterglow atmospheric pressure glow discharge mass spectrometry
Matthias C. Jecklin, Gerardo Gamez, Renato Zenobi
DOI: 10.1039/B819560A
Development of an azo functionalized oligomeric chitosan sensor for rapid visual, spectrophotometric and spectrofluorometric detection of KMnO4 up to micromolar concentrations
Madhvi Garg, Dhiraj Sud
DOI: 10.1039/D2AN01873J
Raman spectroscopy – a potential platform for the rapid measurement of carbon nanotube-induced cytotoxicity
Peter Knief, Colin Clarke, Eva Herzog, Maria Davoren, Fiona M. Lyng, Aidan D. Meade, Hugh J. Byrne
DOI: 10.1039/B821393C
An ultra-fast UV-electrochemical sensor based on Cu-MOF for highly sensitive and selective detection of ferric ions
Xiaoqin Wu, Juanli Xi, Xuehong Wei, Caixia Yin
DOI: 10.1039/D2AN01865A
An ECL sensor combined with a paper electrode for the determination of phenylalanine
Hilal Torul, Elif Çalık Kayiş, I. Hakki Boyaci, Ugur Tamer
DOI: 10.1039/D2AN01340A
Copper nanoclusters on specific-primer PCR fragments with magnetic capture for the label-free fluorescent sensing of the T315I single nucleotide variant in the BCR–ABL1 gene
Ke-Peng Lai, Yu-Chen Su, Bo-Siang Fu, Kung-Hung Lin, Hwang-Shang Kou
DOI: 10.1039/D2AN01433E
Detection ofdrug-induced cellular changes using confocal Raman spectroscopy on patterned single-cell biosensors
Ryan Buckmaster, Fareid Asphahani, Myo Thein, Jian Xu, Miqin Zhang
DOI: 10.1039/B900420C
Coil spring-powered pump with inertial microfluidic chip for size-based isolation and enrichment of biological cells
Hogyeong Gwak, Seong Min Ha, Jae-Woo Song, Kyung-A. Hyun
DOI: 10.1039/D2AN01380K
A dual-response mitochondria-targeted NIR fluorescent probe with large Stokes shift for monitoring viscosity and HOCl in living cells and zebrafish
Wangbo Qu, Bin Yang, Taiyu Guo, Ruowei Tian, Shuang Qiu, Xinyue Chen, Zhirong Geng, Zhilin Wang
DOI: 10.1039/D2AN01693A
Identification of two SPRY isoforms SPRY1 and SPRY3 by atomic force microscopy at the single-molecule level
Xiaomei Yang, Zhirong Li, Jun Zhang, Wenjie Zhao
DOI: 10.1039/D2AN01468H
You might also like
What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?
When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...
What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?
When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...
How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?
Waste containing this compound (CAS: 62921-74-8) should be handled according to ...
How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?
Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...
How is 5-({4-[(2S,4R)-4-Hydroxy-2-methyltetrahydro-2H-pyran-4-yl]-2-thienyl}sulfanyl)-1-methyl-1,3-dihydro-2H-indol-2-one (CAS: 166882-70-8) typically synthesized?
This compound can be synthesized using a multi-step process involving the conjug...
Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?
There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...
How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?
Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...
How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?
Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...
How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?
Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...
How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?
5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














