Enzymatically degradable nanogels by inverse miniemulsion copolymerization of acrylamide with dextran methacrylates as crosslinkers
Literature Information
Daniel Klinger, Eugen M. Aschenbrenner, Clemens K. Weiss, Katharina Landfester
Nanogels consisting of polyacrylamide (PAAm), crosslinked with dextranmethacrylate (Dex-MA), were designed to be partially biodegradable by enzymatic cleavage of the methacryl-functionalized polysaccharide chains. Important properties of the described hydrogels such as a low initial degree of swelling and a high crosslinking efficiency—in order to ensure the morphological integrity during nanogel preparation, purification and storage—are highly favored. Primarily, those requirements strongly depend on the amount of crosslinking points, i.e.methacrylategroups in the network. This parameter was adjusted by either increasing the ratio of Dex-MA/AAm for a fixed degree of substitution (DS) of Dex-MA or increasing the DS of Dex-MA for a fixed ratio of Dex-MA/AAm. Secondly, the distribution of crosslinking points in the network is another crucial parameter which was optimized by lowering the molecular weight of the Dex-MA for analogous DS or by simultaneously increasing the Dex-MA/AAm ratio and decreasing the respective DS. This resulted in nanogels with a reduced initial degree of swelling and sol content, therefore indicating a more homogeneous distribution of the same amount of crosslinking points. Degradation of the hybrid gel nanoparticles was examined by turbidity and DLS measurements upon treatment with dextranase. It was found that the degradation behavior depends on the total amount of methacrylategroups in the network and the degree of substitution of the individual Dex-MA chains.
Related Literature
CO dissociation on magnetic Fen clusters
Alexis Markovits, Christian Minot, Manef Abderrabba, Michel A. Van Hove
DOI: 10.1039/C4CP01527D
Electrochemical in battery polymerization of poly(alkylenedioxythiophene) over lithium iron phosphate for high-performance cathodes
Daniel Cíntora-Juárez, Carlos Pérez-Vicente, Shahzada Ahmad, José Luis Tirado
DOI: 10.1039/C4CP02796E
The adsorption behaviour of CH4 on microporous carbons: effects of surface heterogeneity
Dongliang Jin, Xiaoqing Lu, Mingmin Zhang, Shuxian Wei, Qing Zhu, Xiaofan Shi, Yang Shao, Weili Wang, Wenyue Guo
DOI: 10.1039/C3CP55107E
A theoretical study of three gas-phase reactions involving the production or loss of methane cations
Leonardo Baptista, Enio F. da Silveira
DOI: 10.1039/C4CP02607A
Theoretical investigation on structural and electronic properties of organic dye C258 on TiO2(101) surface in dye-sensitized solar cells
Ping-Ping Sun, Quan-Song Li, Li-Na Yang, Zhu-Zhu Sun, Ze-Sheng Li
DOI: 10.1039/C4CP02951H
Directions of chemical change: experimental characterization of the stereodynamics of photodissociation and reactive processes
Dock-Chil Che, Michio Okada, Federico Palazzetti, Vincenzo Aquilanti
DOI: 10.1039/C4CP00464G
Correction: Effect of dispersion on surface interactions of cobalt(ii) octaethylporphyrin monolayer on Au(111) and HOPG(0001) substrates: a comparative first principles study
Bhaskar Chilukuri, Ursula Mazur, K. W. Hipps
DOI: 10.1039/C4CP90114B
Pinacyanol chloride forms mesoscopic H- and J-aggregates in aqueous solution – a spectroscopic and cryo-transmission electron microscopy study
Hans v. Berlepsch, Kai Ludwig, Christoph Böttcher
DOI: 10.1039/C4CP00967C
You might also like
What industries use 4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine (CAS: 1015845-73-4)?
4-(4-tert-Butylphenyl)-1H-pyrazol-3-amine finds applications in various industri...
What industries use H3TATAB (CAS: 63557-10-8)?
H3TATAB is used in the pharmaceutical industry for the synthesis of certain orga...
What are the main uses of 1-Ethyl-3-fluorobenzene (CAS: 696-39-9)?
1-Ethyl-3-fluorobenzene (CAS: 696-39-9) is primarily used as a precursor in the ...
What are the main uses of 1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid (CAS: 851484-94-1)?
1-(tert-Butoxycarbonyl)-4-(4-methoxyphenyl)pyrrolidine-3-carboxylic acid is prim...
What are the physical and chemical properties of 1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0)?
1-Cyclobutyl-4-piperidinone (CAS: 359880-05-0) is a colorless or white crystalli...
What is Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0)?
Pyridine-2,6-dicarboxylic acid mono-tert-butyl ester (CAS: 575433-76-0) is a che...
What is the market or research trend for 2,3-Difluorophenylalanine (CAS: 236754-62-4)?
The market for 2,3-Difluorophenylalanine (CAS: 236754-62-4) is growing with incr...
How is (2-Hydroxy-1-naphthyl)boronic acid (CAS: 898257-48-2) typically synthesized?
(2-Hydroxy-1-naphthyl)boronic acid can be synthesized through the reduction of 2...
What are the physical and chemical properties of tert-Butyl (5-bromo-6-methyl-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridin-2-yl)carbamate (CAS: 1315351-28-0)?
This compound is a crystalline solid with a molecular weight of approximately 52...
Are there alternatives to 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-glucopyranoside (CAS: 19833-12-6) in synthesis?
While 5,7-Dihydroxy-4-oxo-2-(3,4,5-trihydroxyphenyl)-4H-chromen-3-yl beta-D-gluc...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![4-[2-(3,4-Dihydro-2H-chromen-6-yl)-1,3-oxazol-5-yl]-1-(3-{[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl}benzyl)pyridinium bromide structure 4-[2-(3,4-Dihydro-2H-chromen-6-yl)-1,3-oxazol-5-yl]-1-(3-{[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl}benzyl)pyridinium bromide structure](https://static.chemtradehub.com/structs/155/155863-03-9-8183.webp)
![Ethyl 2-[(3-bromo-4-pyridinyl)sulfanyl]-2-methylpropanoate structure Ethyl 2-[(3-bromo-4-pyridinyl)sulfanyl]-2-methylpropanoate structure](https://static.chemtradehub.com/structs/135/1352794-86-5-a8aa.webp)
