Autoxidation of α-pinene at high oxygen pressure

Literature Information

Publication Date 2010-07-06
DOI 10.1039/C0CP00010H
Impact Factor 3.676
Authors

Ulrich Neuenschwander, Ive Hermans


View Original

Abstract

The liquid-phase oxidation of the renewable olefin α-pinene with molecular oxygen yields several valuable compounds for the fine-chemical industry. The most important products are verbenol/-one and α-pinene oxide. Following our previous work on the radical autoxidation at atmospheric pressure, this contribution addresses the influence of the oxygen pressure on the reaction mechanism and the product distribution. Trapping of the radical epoxide-precursor by O2 causes a decrease of the epoxide selectivity, as well as the formation of a thermally unstable dialkylperoxide. This dialkylperoxide accelerates the rate significantly, due to an enhancement of the radical initiation. Although this causes a decrease of the radical chain-length, the amount of products produced in the chain-termination can still be neglected compared to the amount produced in the chain-propagations. Parallel to this, the ketone to alcohol ratio increases at higher oxygen pressure, due to the reaction of alkoxyl radicals with O2, as well as a reaction of O2 with the addition product of the alkoxyl radicals and the CC double bond of the substrate. For O2 partial pressures of 1 to 80 bar, rate constants of important reactions are extracted from the experimental observations via differential modelling, and confronted with literature values and/or quantum-chemical predictions. The derived mechanism is supported at the molecular level and provides a reliable description of the experimental observations.

Related Literature

Multiple active oxidants in competitive epoxidations catalyzed by porphyrins and corroles

James P. Collman, Li Zeng, Richard A. Decréau

2003-11-03 Communication

DOI: 10.1039/B310763A

Preparation and structure of 2-iodoxybenzoate esters: soluble and stable periodinane oxidizing reagents

Viktor V. Zhdankin, Dmitry N. Litvinov, Alexey Y. Koposov, Thanh Luu, Michael J. Ferguson, Robert McDonald, Rik R. Tykwinski

2003-11-18 Communication

DOI: 10.1039/B312961F

Alteration of room temperature phosphorescence lifetimes of quinine and quinidine by chiral additives

Yanli Wei, Wing-Hong Chan, Albert W. M. Lee, Carmen W. Huie

2003-12-18 Communication

DOI: 10.1039/B311667K

Recycling of the homogeneous Co-Jacobsen catalyst through solvent-resistent nanofiltration (SRNF)

H. Weyten, A. Buekenhoudt, L. E. M. Gevers, I. F. J. Vankelecom, P. A. Jacobs

2004-02-16 Communication

DOI: 10.1039/B312580G

Stabilization of D5h and C2v valence tautomers of the croconate dianion

Chi-Keung Lam, Mei-Fun Cheng, Chi-Lun Li, Jie-Peng Zhang, Xiao-Ming Chen, Wai-Kee Li, Thomas C. W. Mak

2003-12-18 Communication

DOI: 10.1039/B312545A

Structural codons: linearity/helicity interconversion by pyridine/pyrimidine exchange in molecular strands

Ibon Odriozola, Nathalie Kyritsakas, Jean-Marie Lehn

2003-11-12 Communication

DOI: 10.1039/B311045A

Room-temperature one-step immobilization of rod-like helical polymer onto hydrophilic substrates

Guangqing Guo, Masanobu Naito, Michiya Fujiki, Anubhav Saxena, Kento Okoshi, Yonggang Yang, Masaaki Ishikawa, Takahiro Hagihara

2004-01-07 Communication

DOI: 10.1039/B310985B

Hydrogen adsorption in the nanoporous metal-benzenedicarboxylate M(OH)(O2C–C6H4–CO2) (M = Al3+, Cr3+), MIL-53

Gérard Férey, Michel Latroche, Christian Serre, Franck Millange, Thierry Loiseau, Annick Percheron-Guégan

2003-11-04 Communication

DOI: 10.1039/B308903G

Structure and magnetism of a new pyrazolate bridged iron(II) spin crossover complex displaying a single HS–HS to LS–LS transition

Ben A. Leita, Boujemaa Moubaraki, Keith S. Murray, Jonathan P. Smith, John D. Cashion

2003-11-20 Communication

DOI: 10.1039/B311818E

You might also like

Compound Q&A

How should waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) be handled?

Waste containing 2-Ethyl-4-Methyl-1H-Imidazole-5-Carbaldehyde (CAS: 88634-80-4) ...

88634-80-42-Ethyl-4-Methyl-1H-...
Compound Q&A

What industries use Triethoxy(octyl)silane (CAS: 1385031-14-0)?

Triethoxy(octyl)silane (CAS: 1385031-14-0) is widely used in the pharmaceuticals...

1385031-14-0Triethoxy(octyl)sila...
Compound Q&A

Are there alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) in synthesis?

Several alternatives to 3-iodo-7-nitro-1H-indazole (CAS: 864724-64-1) exist in t...

864724-64-13-iodo-7-nitro-1H-in...
Compound Q&A

Are there alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317-71-9) in synthesis?

Yes, there are alternatives to Benzene, bis[(trimethoxysilyl)ethyl] (CAS: 266317...

266317-71-9Benzene, bis[(trimet...
Compound Q&A

Is Isothiazole-3-carbonitrile (CAS: 1452-17-1) safe?

Isothiazole-3-carbonitrile (CAS: 1452-17-1) is generally considered safe when us...

1452-17-1Isothiazole-3-carbon...
Compound Q&A

Is (3-Chlorophenyl)methanol (CAS: 873-63-2) safe?

(3-Chlorophenyl)methanol (CAS: 873-63-2) is considered low to moderately toxic. ...

873-63-2(3-Chlorophenyl)meth...
Compound Q&A

How is (2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)propanoic acid (CAS: 959583-98-3) typically synthesized?

(2S,3S)-2-Hydroxy-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-3-(2-naphthyl)pr...

959583-98-3(2S,3S)-2-Hydroxy-3-...
Compound Q&A

What precautions should be taken when handling Methyl 2-(bromomethyl)-5-methoxybenzoate (CAS: 788081-99-2)?

Proper handling of methyl 2-(bromomethyl)-5-methoxybenzoate requires the use of ...

788081-99-2Methyl 2-(bromomethy...
Compound Q&A

What is 6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3)?

6,8-Dibromoimidazo[1,2-a]pyridine-2-carboxylic acid (CAS: 904805-36-3) is an aro...

904805-36-36,8-Dibromoimidazo[1...
Compound Q&A

Is 3-Amino-5-bromo-2-pyridinecarbonitrile (CAS: 573675-27-1) safe?

3-Amino-5-bromo-2-pyridinecarbonitrile is considered safe when handled under pro...

573675-27-13-Amino-5-bromo-2-py...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.