Radiationless deactivation of singlet oxygen (1Δg) sensitized by 9-acetylanthracene in liquid and supercritical ethane: local density augmentation in the vicinity of the singlet oxygen and sensitizer molecules

Literature Information

Publication Date 2002-04-12
DOI 10.1039/B111592H
Impact Factor 3.676
Authors

Masami Okamoto, Masashi Nagano, Hiroaki Nagashima, Fujio Tanaka


View Original

Abstract

The lifetime of singlet oxygen (1Δg) sensitized by apparently non-fluorescent 9-acetylanthracene (ACA) was determined at pressures up to about 35 MPa in supercritical ethane (SCF ethane; 35, 45 and 55 °C) as well as in liquid ethane (25 °C) from the phosphorescence decay measurements. For all the systems examined, the decay rate constant (τΔ−1) increased significantly at the lower pressure region and monotonically as pressure increased further. It was also found that the pressure dependence of the bimolecular rate constant for quenching, kD, is similar to that of τΔ−1. The apparent activation volume for kD varied from −120 to −32 cm3 mol−1 at the lower pressure region and from −24 to −15 cm3 mol−1 at the higher pressure region. In liquid solution over the pressure range examined, the pressure dependence of kD was interpreted well by a mechanism of the encounter complex formed between the singlet oxygen and the solvent molecules, together with that of the radial distribution function at contact with hard spheres, whereas it was not for the SCF systems in the low pressure region. In SCF solution, the deviation from this model was attributed to the contribution of the local density augmentation around the solute molecule. The degree of the local density augmentation evaluated is compared with that determined from the peak shift in absorption spectra of ACA measured in this work.

Related Literature

Photoassisted synthesis of manganese oxide nanostructures using visible light at room temperature

Lavinia Balan, Loïc Vidal

2013-06-11 Paper

DOI: 10.1039/C3GC40487K

Sustainable catalysts for methanol carbonylation

Fengbo Li, Zhijun Huang, Guoqing Yuan

2013-03-27 Paper

DOI: 10.1039/C3GC00024A

Front cover

Cover

DOI: 10.1039/C3GC90028B

Evaluation of deep eutectic solvent–water binary mixtures for lipase-catalyzed lipophilization of phenolic acids

Erwann Durand, Jérôme Lecomte, Bruno Baréa, Eric Dubreucq, Robert Lortie, Pierre Villeneuve

2013-06-24 Paper

DOI: 10.1039/C3GC40899J

Inside front cover

Cover

DOI: 10.1039/C3GC90025H

Decomposition of hydrogen sulfide in non-thermal plasma aided by supported CdS and ZnS semiconductors

Lu Zhao, Yao Wang, Liang Jin, Minglei Qin, Xiang Li, Anjie Wang, Yongkang Hu

2013-04-09 Communication

DOI: 10.1039/C3GC00092C

An efficient electrochemical method for the atom economical synthesis of some benzoxazole derivatives

Hamid Salehzadeh, Davood Nematollahi, Hooman Hesari

2013-06-20 Paper

DOI: 10.1039/C3GC40954F

You might also like

Compound Q&A

What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?

When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...

40716-16-34-Methyl-6-(trifluor...
Compound Q&A

What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?

4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...

405058-00-64-(3,5-Difluoropheny...
Compound Q&A

How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?

5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...

338982-07-35-{[4-(Trifluorometh...
Compound Q&A

What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?

The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...

6317-57-34-Benzylaniline hydr...
Compound Q&A

Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?

[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...

871329-58-7[3-(Diethylsulfamoyl...
Compound Q&A

What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?

3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...

115929-62-93-Bromo-2,5-dimethox...
Compound Q&A

What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?

N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...

915922-67-7N-Methyl-1-(5-methyl...
Compound Q&A

What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?

This compound is primarily used in the pharmaceutical industry for the synthesis...

24828-96-4Carbamic acid, N-[(5...
Compound Q&A

How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?

2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...

1298101-47-92-Methyl-2-propanyl ...
Compound Q&A

What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?

Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...

367-33-9Ethyl 2-bromo-4,4,4-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.