Inverse micellar phases of phospholipids and glycolipids. Invited Lecture

Literature Information

Publication Date 2000-10-03
DOI 10.1039/B004916F
Impact Factor 3.676
Authors

J. M. Seddon, J. Robins, T. Gulik-Krzywicki, H. Delacroix


View Original

Abstract

We here review the current knowledge of lyotropic liquid-crystalline phases having structures based upon periodic three-dimensional packings of discrete inverse micellar aggregates. These have been shown during the last decade to be rather common in lipid systems, particularly in lipid mixtures. The most frequently observed such structure is a cubic phase of crystallographic spacegroup Fd3m. We have previously determined the structure of this inverse micellar cubic phase, both by X-ray diffraction (V. Luzzati, R. Vargas, A. Gulik, P. Mariani, J. M. Seddon and E. Rivas, Biochemistry, 1992, 31, 279) and by freeze fracture electron microscopy (FFEM) (H. Delacroix, T. Gulik-Krzywicki and J. M. Seddon, J. Mol. Biol., 1996, 258, 88), and have determined the effect of pressure on its stability (P. M. Duesing, J. M. Seddon, R. H. Templer and D. A. Mannock, Langmuir, 1997, 13, 265). We have measured the limiting hydration of the Fd3m phase in a number of lipid systems. We have found that electrical conductivity measurements can offer a simple way of distinguishing bicontinuous from discontinuous (inverse micellar) phases. We have also discovered a new optically-isotropic phase in a few lipid systems, at lower hydrations than the Fd3m cubic phase. The X-ray diffraction pattern does not appear to index as cubic, and we assume that this phase consists of a non-cubic complex 3-D packing of inverse micelles. It gives rise to three different fracture planes by FFEM, one of which is identical to the [111] fracture plane of the Fd3m cubic phase, with two different sub-domains with alternating aspects along the [111] direction being present. This implies that the two inverse micellar phases may be related by a restacking transition of planes normal to the cubic [111] direction, analogous to the fcc–hcp restacking transition of hard spheres.

Related Literature

A new strategy towards ultra stable mesoporous titania with nanosized anatase walls

K. Cassiers, T. Linssen, V. Meynen, P. Van Der Voort, P. Cool, E. F. Vansant

2003-04-16 Communication

DOI: 10.1039/B302116E

Ion-exchange synthesis and magneto-optical spectra of colored magnetic thin films composed of metal(ii) hexacyanochromate(iii)

Masanori Tozawa, Norimichi Kojima, Kazuhito Hashimoto

2003-04-22 Communication

DOI: 10.1039/B212861F

The first example of direct oxidation of sulfides to sulfones by an osmate molecular oxygen system

Boyapati M. Choudary, Chinta Reddy V. Reddy, Billakanti V. Prakash, Mannepalli L. Kantam, B. Sreedhar

2003-02-20 Communication

DOI: 10.1039/B212749K

Novel and efficient chiral sulfideoxathiane ligands for palladium-catalyzed asymmetric allylic alkylation

Yuko Okuyama, Hiroto Nakano, Kouichi Takahashi, Hiroshi Hongo, Chizuko Kabuto

2003-01-17 Communication

DOI: 10.1039/B211031H

A quasi-covalent metal–metal bond in an early–late heterobimetallic Ti–Pt complex stabilized by phosphinoenolate ligands‡

Pierre Braunstein, Xavier Morise, Marc Bénard, Marie-Madeleine Rohmer, Richard Welter

2003-02-03 Communication

DOI: 10.1039/B211289M

Control of Al distribution in ZSM-5 by conditions of zeolite synthesis

2003-04-23 Communication

DOI: 10.1039/B301634J

Direct observation of oxygen depletion and product formation during photocatalysis at a TiO2 surface using scanning electrochemical microscopy

Sofia M. Fonseca, Anna L. Barker, Samina Ahmed, Terence J. Kemp, Patrick R. Unwin

2003-03-24 Communication

DOI: 10.1039/B212222G

Self-organized formation of a hierarchical self-similar structure with calcium carbonate

Hiroaki Imai, Tomohiro Terada, Satoshi Yamabi

2003-01-24 Communication

DOI: 10.1039/B211240J

A ruthenium catalyst that does not require an N–H ligand to achieve high enantioselectivity for hydrogenation of an alkyl-aryl ketone

Carolyn G. Leong, Okwado M. Akotsi, Michael J. Ferguson, Steven H. Bergens

2003-02-25 Communication

DOI: 10.1039/B212544G

Non-aggregating octasubstituted dendritic phthalocyanines

Casey A. Kernag, Dominic V. McGrath

2003-04-03 Communication

DOI: 10.1039/B301157G

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.