1H NMR and thermodynamic study of self-association and complex formation equilibria by hydrogen bonding. Methanol with chloroform or halothane
Literature Information
Mixtures of methanol with two strong proton donors, chloroform and halothane (2-bromo-2-chloro-1,1,1-trifluoroethane), were studied. The behaviour of these systems is governed by aggregate formation through H-bonding, where methanol self-association and its complex formation with the proton donors compete. In order to obtain information about these aggregate formation equilibria, 1H NMR chemical shifts of the chloroform or halothane proton and of the hydroxy proton of methanol were measured as a function of concentration and temperature. The NMR data are expressed in the form of a new quantity, defined in this work, the relative change of the chemical shift. This quantity is convenient because it gives directly the extent of H-bonding without containing any NMR-specific parameter. The NMR data and the excess thermodynamic functions from the literature (GE or ln γi, HE and CPE) were analysed using simple models of athermal association, amended by physical or thermal terms estimated on the basis of coupled homomorph and solution-of-groups approaches. Three particular models were tested, two of continuous methanol association (from tetramers to infinite size species) and one model that considers only methanol tetramerization. For the three models, methanol self-association parameters were previously obtained from independent data. Using enthalpy of solvation values obtained from quantum mechanical calculations, the equilibrium constant for the formation of methanol–chloroform and methanol–halothane complexes was the only fitted parameter. The continuous association models failed to fit the present data even qualitatively, whereas the tetramerization model gave reasonable agreement with experiment both for NMR and the excess thermodynamic functions. In accordance with previously studied mixtures of chloroform and halothane with oxygenated compounds, the methanol–halothane complex is found to be stronger than the methanol–chloroform complex; this is due to a more acidic hydrogen atom in halothane than in chloroform.
Related Literature
Hydrogen and steam injected tandem μ-reactor GC/FID system: phenol recovery from bisphenol A and alkylphenols using Ni/Y zeolite
S. Kumagai, M. Asakawa, T. Kameda, Y. Saito, A. Watanabe, C. Watanabe, T. Yoshioka
DOI: 10.1039/C9RE00299E
Kinetic evaluation of the hydroformylation of the post-metathesis product 7-tetradecene using a bulky phosphite-modified rhodium catalyst
Nicholas C. C. Breckwoldt, Neill J. Goosen, Hermanus C. M. Vosloo, Percy Van der Gryp
DOI: 10.1039/C8RE00239H
Calcination kinetics of cement raw meals under various CO2 concentrations
Jose Ramon Fernandez, Sandra Turrado, Juan Carlos Abanades
DOI: 10.1039/C9RE00361D
Theoretical study on enzyme synthesis of cephalexin in a parallel-flow microreactor combined with electrically driven ATPS microextraction
Karel Mařík, Linda Tichá, Lucie Vobecká, Michal Přibyl
DOI: 10.1039/C9RE00482C
Merging of a chemical reaction with microbial metabolism via inverse phase transfer catalysis for efficient production of red Monascus pigments
Bin Gu, Haisheng Xie, Xuehong Zhang, Zhilong Wang
DOI: 10.1039/C9RE00179D
A two-step modelling approach for plasma reactors – experimental validation for CO2 dissociation in surface wave microwave plasma
Sergio H. Moreno, Andrzej I. Stankiewicz, Georgios D. Stefanidis
DOI: 10.1039/C9RE00022D
Telescoped continuous flow generation of a library of highly substituted 3-thio-1,2,4-triazoles
Mariana C. F. C. B. Damião, Renan Galaverna, Alan P. Kozikowski, James Eubanks, Julio C. Pastre
DOI: 10.1039/C7RE00125H
Application of modulation excitation-phase sensitive detection-DRIFTS for in situ/operando characterization of heterogeneous catalysts
Hongda Zhu
DOI: 10.1039/C9RE00011A
You might also like
What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?
3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...
Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?
Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...
What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?
Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...
How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?
2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...
How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?
This compound should be stored in a cool, dry place away from direct sunlight an...
What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?
L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...
Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?
6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...
What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?
1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...
What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?
4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...
How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?
Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.













![(3R)-3-(3-Fluorophenyl)-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)propanoic acid structure (3R)-3-(3-Fluorophenyl)-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)propanoic acid structure](https://static.chemtradehub.com/structs/500/500789-04-8-20dd.webp)
