Photoprocesses in dimers of thiacarbocyanines

Literature Information

Publication Date
DOI 10.1039/A809354G
Impact Factor 3.676
Authors


View Original

Abstract

The properties of monomeric and dimeric thiacarbocyanine (1) and three derivatives with methyl (2) and ethyl (3 and 4) meso-substituents were studied in aqueous solution by time-resolved and steady-state spectroscopic methods. Dimerization is characterized by a blue-shifted band at 512–536 nm, a high association constant, e.g. KD=3.8×104 and 2.8×105 d mol-1 for 1 and 3, respectively and a negative enthalpy and enthropy, e.g. ΔHD=-72 kJ mol-1 and ΔSD=-142 J mol-1 K-1 for 3. Dimers are composed from the all-trans isomers for 1 and from mono-cis isomers for 2–4 with face-to-face alignment. They are non-fluorescent and the observed weak fluorescence originates essentially from the all-trans monomers. The triplet state of the monomer/dimer composition was observed upon naphthalene-sensitized and direct excitation. The triplet yield is largest for 3 and is due only to the dimer, whereas for 2 both monomer and dimer contribute to the overall T-T absorption spectrum. The amounts of T-T absorption and bleaching as a function of temperature resemble that of the ratio of monomer to dimer concentrations. Reasons for the lack of trans→cis photoisomerization in the cases of 2–4 are discussed.

Related Literature

Continuous microfluidic synthesis of colloidal ultrasmall gold nanoparticles: in situ study of the early reaction stages and application for catalysis

Ghazal Tofighi, Jan Pesek, Wu Wang, Ludger Schöttner, Günter Rinke, Roland Dittmeyer

2017-09-13 Paper

DOI: 10.1039/C7RE00114B

Inside front cover

Cover

DOI: 10.1039/C9RE90058F

The interplay between ceria particle size, reducibility, and ethanol oxidation activity of ceria-supported gold catalysts

Gregory M. Mullen, Edward J. Evans, Jr., Benjamin C. Siegert, Nathan R. Miller, Benjamin K. Rosselet, Iliya Sabzevari, Adrianna Brush, Zhiyao Duan

2018-01-05 Paper

DOI: 10.1039/C7RE00175D

Nucleophilic construction of sulfate bonds: simplified access to polysulfates and polysulfonates

Weiwei Zhu, Fuchong Li, Jikun Liu, Xingyu Ma, Xianxing Jiang

2019-08-07 Paper

DOI: 10.1039/C9RE00227H

Lignin valorization process control under feedstock uncertainty through a dynamic stochastic programming approach

Hanxi Bao, Zhiqiang Zhou, Georgios Kotsalis, Guanghui Lan, Zhaohui Tong

2019-07-17 Communication

DOI: 10.1039/C9RE00176J

Kinetic evaluation of the hydroformylation of the post-metathesis product 7-tetradecene using a bulky phosphite-modified rhodium catalyst

Nicholas C. C. Breckwoldt, Neill J. Goosen, Hermanus C. M. Vosloo, Percy Van der Gryp

2019-01-25 Paper

DOI: 10.1039/C8RE00239H

Peroxidation of 2-oxindole and barbituric acid derivatives under batch and continuous flow using an eco-friendly ethyl acetate solvent

Moreshwar B. Chaudhari, Nirmala Mohanta, Akanksha M. Pandey, Madhusoodhanan Vandana, Krishanpal Karmodiya, Boopathy Gnanaprakasam

2019-04-24 Paper

DOI: 10.1039/C9RE00068B

Analysis of the effect of the operational conditions in a combined adsorption–ozonation process with granular activated carbon for the treatment of phenol wastewater

Cristian Ferreiro, Natalia Villota, Ana de Luis, Jose Ignacio Lombraña

2020-02-12 Paper

DOI: 10.1039/C9RE00424F

Integrated continuous flow/batch protocol for the photoreduction of ortho-methyl phenyl ketones using water as the hydrogen source

Dnyaneshwar Aand, Bhushan Mahajan, Srihari Pabbaraja, Ajay K. Singh

2019-04-01 Communication

DOI: 10.1039/C9RE00110G

Back cover

Cover

DOI: 10.1039/C7RE90026K

You might also like

Compound Q&A

What is 3-Fluoro-2-methylbenzylamine (CAS: 771573-36-5)?

3-Fluoro-2-methylbenzylamine is an organic compound with the CAS number 771573-3...

771573-36-53-Fluoro-2-methylben...
Compound Q&A

Is Tert-butyl 2-(oxetan-3-ylidene)acetate (CAS: 1207175-03-8) safe?

Tert-butyl 2-(oxetan-3-ylidene)acetate is considered safe for its intended uses ...

1207175-03-8Tert-butyl 2-(oxetan...
Compound Q&A

What precautions should be taken when handling 4-Acetyl-2-fluorobenzonitrile (CAS: 214760-18-6)?

Proper personal protective equipment (PPE) such as gloves, goggles, and a lab co...

214760-18-64-Acetyl-2-fluoroben...
Compound Q&A

How is 2-Ethyl-4-methyl-1,3-thiazole (CAS: 15679-12-6) typically synthesized?

2-Ethyl-4-methyl-1,3-thiazole is commonly synthesized via the reaction of thiour...

15679-12-62-Ethyl-4-methyl-1,3...
Compound Q&A

How should 5',5''-([2,2'-Bithiophene]-5,5'-diyl)bis(([1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid)) (CAS: 1227780-71-3) be stored?

This compound should be stored in a cool, dry place away from direct sunlight an...

1227780-71-35',5''''-([2,2'-Bith...
Compound Q&A

What regulatory guidelines apply to L-Lysine Acetate Salt (CAS: 52315-92-1)?

L-Lysine Acetate Salt (CAS: 52315-92-1) is subject to various regulatory guideli...

52315-92-1L-LYSINE ACETATE SAL...
Compound Q&A

Is 6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) safe?

6-Fluoro-3-hydroxy-2-pyrazinecarboxamide (CAS: 259793-96-9) is generally conside...

259793-96-96-Fluoro-3-hydroxy-2...
Compound Q&A

What are the physical and chemical properties of 1,1'-Sulfonylbis(1H-imidazole) (CAS: 7189-69-7)?

1,1'-Sulfonylbis(1H-imidazole) is a crystalline solid with a molecular weight of...

7189-69-71,1'-Sulfonylbis(1H-...
Compound Q&A

What industries use 4-methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5)?

4-Methyl-7-nitro-1H-indole-3-carbonitrile (CAS: 289483-82-5) is primarily used i...

289483-82-54-methyl-7-nitro-1H-...
Compound Q&A

How should waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) be handled?

Waste containing 5-Bromo-3-indolyl-beta-galactoside (CAS: 97753-82-7) should be ...

97753-82-75-Bromo-3-indolyl-be...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.