Molecular and Biochemical Parasitology

Basic Information

Brief Name: MOL BIOCHEM PARASIT
Impact Factor: 1.4
ISSN: 0166-6851
Research Field: MEDICAL
h-index: 103
Self-citation Rate: 7.1%
Articles per Year: 35

SCI Index Status: Science Citation Index Expanded
Journal Website: https://www.sciencedirect.com/journal/molecular-and-biochemical-parasitology
Journal Introduction:

Molecular and Biochemical Parasitology provides a medium for rapid publication of investigations of the molecular biology and biochemistry of parasitic protozoa and helminths and their molecular interactions with their definitive and intermediate hosts and their vectors. The main subject areas covered are: the structure, biosynthesis, degradation, properties and function of parasite biomolecules - DNA, RNA, proteins, lipids, carbohydrates and small molecular-weight substances host-parasite relationships particularly as related to specific parasite molecules and to the response of host cells to infection vector-parasite relationships at the molecular level intermediary metabolism and bioenergetics drug target characterization and the mode of action of antiparasitic drugs analysis of gene function, expression, and of genome structure and stability analysis of variation in parasite populations relevant to genetic exchange, pathogenesis, drug and vaccine target characterization, and drug resistance; please note that genetic variation data must be supported by phenotypic/experimental data showing the effect of the variation, and that papers reporting solely on allele frequencies in specific regions will not be accepted. parasite protein trafficking, organelle biogenesis, and cellular structure especially with reference to the roles of specific molecules molecular and biochemical aspects of membrane structure and function parasite programmed cell death, development, and cell division at the molecular level methods reports - descriptions of novel or newly-optimized methods with broad applicability to molecular and biochemical parasitology Papers will only be accepted for publication if they fall within these areas, if they contain original and complete work of high scientific quality, and if they are well presented. Papers solely confirming the conserved functions of genes previously studied in other organisms will not be considered. We welcome short communications documenting a succinct but clear and important advance. 1. Original research articles should report highly significant innovative results not previously published elsewhere. Original articles are limited to 7,000 words per article (all text excluding tables and figure legends). 2. Short Communications need not be formally structured as full papers but should describe significant new findings and observations. The manuscript should ideally contain no more than 4Figures/Tables and 3000 words. The abstract should be limited to 200 words. 3. Methods Reports should contain descriptions of novel or newly-optimised methods with broad applicability to molecular parasitologists. The manuscript should ideally contain no more than 4 Figures/Tables and 3000 words. Results and Discussion are usually combined. The abstract should be limited to 200 words. Methods Reports must include a detailed step-by-step protocol and/or analysis code in the supplementary material. 4. Review articles should cover subjects falling within the scope of the journal which are of active current interest. They may be submitted or invited by the Editors. Review articles should include insightful recommendations for future directions needed for achieving public health impacts. Review articles are limited to 15,000 words per article (all text excluding tables and figure legends). If you have a suggestion for a Review article topic please email Special Content Editor, Geoff Gobert: G.Gobert@qub.ac.uk 5. Perspective articles should include scientifically backed points of view regarding currently relevant, controversial or future-oriented topics pertinent to the scope of MBP. Note that only outlining recent advances in a given field is not acceptable for a Perspective article. Besides stimulating scientific discussion or future research, perspective articles should provide a novel conceptual framework for an old or timely issue. The authors should outline which research directions should be prioritized and highlight specific points explaining why they should be prioritized in future research. Perspective articles are limited to 6,000 words per article (all text excluding tables and figure legends). 6. Letters to the Editor offering comment or useful critique on material published in the journal are welcome. Letters on "hot topics" are also welcome. Note that Letters to the Editors will also be externally reviewed but the decision to publish submitted letters rests with the Editors in Chief. A goal is to publish constructive letters that will permit an exchange of views which will be of benefit to both the journal and its readers. Letters to the Editor are limited to 2,000 words per article (all text excluding tables and figure legends). Most downloaded papers Benefits to authors We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services . Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center

CiteScore

CiteScore
2.9
SJR
0.422
SNIP
0.51
Subject Rank Percentile
Immunology and MicrobiologyParasitology
44 / 79 44%

Journal Statistics

Monthly
Issues/Year
Time to first decision: 26days Review time: 96days Submission to acceptance: 118days Acceptance to publication: 3days
Review Cycle
$3260
Article Processing Fee

Submission Information

Submission Website:

https://www.editorialmanager.com/MOLBIO

Related Articles

Photocatalytic H2 evolution on MoS2–TiO2 catalysts synthesized via mechanochemistry

Qiang Ling, Yanfang Liu, Hua Wang, Yongfa Zhu

2014-11-05 Paper

DOI: 10.1039/C4CP04628E

Measurement and PC-SAFT modelling of three-phase behaviour

Iago Rodríguez-Palmeiro, Oscar Rodríguez, Ana Soto, Christoph Held

2014-11-24 Paper

DOI: 10.1039/C4CP04336G

Assessment of density-functionals for describing the X− + CH3ONO2 gas-phase reactions with X = F, OH, CH2CN

Yaicel G. Proenza, Elizete Ventura, Silmar A. do Monte, Ricardo L. Longo

2014-10-22 Paper

DOI: 10.1039/C4CP03674C

Formation of 2- and 1-methyl-1,4-dihydronaphthalene isomers via the crossed beam reactions of phenyl radicals (C6H5) with isoprene (CH2C(CH3)CHCH2) and 1,3-pentadiene (CH2CHCHCHCH3)

Tao Yang, Lloyd Muzangwa, Dorian S. N. Parker, Ralf I. Kaiser, Alexander M. Mebel

2014-11-07 Paper

DOI: 10.1039/C4CP04612A

Revisiting the conundrum of trehalose stabilization

Nidhi Katyal, Shashank Deep

2014-10-28 Paper

DOI: 10.1039/C4CP02914C

Correction: High throughput first-principles calculations of bixbyite oxides for TCO applications

Nasrin Sarmadian, Rolando Saniz, Bart Partoens, Dirk Lamoen, Kalpana Volety, Guido Huyberechts, Johan Paul

2014-12-01 Correction

DOI: 10.1039/C4CP90183E

Back cover

Cover

DOI: 10.1039/C5CP90003D

The key role of polymer grafted nanoparticles in the phase miscibility of an LCST mixture

Goutam Prasanna Kar, Avanish Bharati, Priti Xavier, Giridhar Madras, Suryasarathi Bose

2014-09-17 Paper

DOI: 10.1039/C4CP02925A

Autocatalytic growth of ZnO nanorods from flat Au(111)-supported ZnO films

Leandro Pascua, Hans-Joachim Freund

2014-10-27 Paper

DOI: 10.1039/C4CP03730H

Nano-design of quantum dot-based photocatalysts for hydrogen generation using advanced surface molecular chemistry

Dalal Noureldine, Tayirjan Isimjan, Bin Lin, Silvano Del Gobbo, Mutalifu Abulikemu, Mohamed Nejib Hedhili, Dalaver H. Anjum, Kazuhiro Takanabe

2014-11-12 Paper

DOI: 10.1039/C4CP04365K

You might also like

Compound Q&A

What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?

Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...

10094-36-7Ethyl 3-cyclohexylpr...
Compound Q&A

How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?

Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...

34783-31-82-(Hydroxymethyl)-5-...
Compound Q&A

How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?

Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...

858-46-82,4,6-Tris(pentafluo...
Compound Q&A

What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?

When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...

56787-36-1Chloroac-nle-oh
Compound Q&A

What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?

Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...

752244-05-6Ethyl 6-phenylimidaz...
Compound Q&A

Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?

Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...

55095-15-3alpha-(2-Bromophenyl...
Compound Q&A

How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?

Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...

139585-48-12-Chloro-5-methoxypy...
Compound Q&A

What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?

1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...

5044-27-91-(4-Methoxyphenyl)-...
Compound Q&A

Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?

There are alternative reagents and compounds that can be used in the synthesis o...

903131-45-33-Bromo-5-(N-Boc)ami...
Compound Q&A

What is Tungsten(IV) oxide (CAS: 12036-22-5)?

Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...

12036-22-5Tungsten(IV) oxide
Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.