Analytica Chimica Acta

Basic Information

Brief Name: ANAL CHIM ACTA
Impact Factor: 5.7
ISSN: 0003-2670
Research Field: CHEMICAL
h-index: 180
Self-citation Rate: 5.3%
Articles per Year: 1010

SCI Index Status: Science Citation Index Expanded
Journal Website: https://www.sciencedirect.com/journal/analytica-chimica-acta
Journal Introduction:

An International Journal Devoted to All Branches of Analytical Chemistry Analytica Chimica Acta provides a forum for the rapid publication of original research, and critical, comprehensive reviews dealing with all aspects of fundamental and applied modern analytical chemistry. The journal welcomes the submission of research papers which report studies concerning the development of new and significant analytical methodologies. In determining the suitability of submitted articles for publication, particular scrutiny will be placed on the degree of novelty and impact of the research and the extent to which it adds to the existing body of knowledge in analytical chemistry. Manuscripts detailing fundamental research on all aspects of analytical chemistry theory and methodology (including chemometric techniques), such as innovative instrumental, chemical and biological approaches, detectors and sensors, sample treatment methods and data treatment that truly demonstrate new principles and/or important applications are especially encouraged. Analytica Chimica Acta focuses on fundamental new developments in analytical chemistry in general and discourages specialized application oriented submissions that are of interest to a limited number of readers. Papers describing the direct use of routine analytical methodologies or their straightforward/incremental extension of these methods to new sample matrices will normally be rejected unless new and important developments are described which can be demonstrated to give obvious and quantifiable advantages over existing approaches. In all submissions to the journal, authors must address the question of how their proposed methodology compares with those previously reported for the analytes in question even if they employed different techniques. The journal does not focus on application papers, especially those that are straightforward utilizations of commercial instrumentation or other existing techniques, regardless of how complex and expensive they may be. If submitted, application papers must clearly demonstrate a high level of general importance and interest to the analytical chemistry community at large. It will normally be expected that where new analytical methodologies and developments are described these will be applied to a sample matrix of suitable analytical complexity. In such cases appropriate validation of the method must be provided, together with proper statistical treatment of data. Analytical performance characteristics of new methodologies must be given, including calibration, sensitivity, detection limits, accuracy, precision, and interferences. They must also clearly demonstrate substantial superiority in some important respect over existing alternatives. Reviews are normally written by prior agreement of the reviews editors. Potential authors are encouraged to discuss the subject matter of a proposed review with the review editor, and will be asked to provide a brief outline of the subject matter of the proposed review. Review articles should be sufficiently broad in scope to appeal to a wide cross-section of the journal's readership, but should be specific enough to permit discussion to be made at an appropriate depth. Basic methodology and principles should not be included in reviews, but suitable reference should be made to sources of this information. Above all, reviews should be critical rather than enumerative and should provide the reader with expert opinion regarding the relative merits of the various published approaches to the topic under review. Figures and Tables are encouraged in review articles. Tutorials describing the fundamental principles and practical operational details of a given analytical technique, sample processing approach or chemometric method are also welcome. Perspectives are short articles (max 5,000 words), usually from a single author, that provide a particular viewpoint pertaining to analytical chemistry. At least initially, this will not be an open submission process but, instead, these will be solicited (by invite only) from individuals of high scientific merit and/or influence by the perspective editor. While they should strive for objectivity, their main focus is on the individual viewpoint, and as such may advocate the importance of a particular avenue of scientific investigation, analytical method, or field of application. Perspective manuscripts are typically reviewed by editors or members of the editorial board. Manuscripts are considered for publication in Analytica Chimica Acta only on the basis that the work is original and unpublished. The editors and publisher are fundamentally opposed to any form of duplication and plagiarism and if discovered, not only will the manuscript be immediately rejected, the corresponding author(s) could be banned from future submissions to any Elsevier journal. Depending on the severity of the offense, the incident may also be reported to the responsible authorities at the corresponding author's institution(s).

CiteScore

CiteScore
10.4
SJR
0.998
SNIP
1.067
Subject Rank Percentile
ChemistrySpectroscopy
7 / 76 91%

Journal Statistics

Weekly
Issues/Year
Time to first decision: 17days Review time: 59314days Submission to acceptance: 78days Acceptance to publication: 4days
Review Cycle
$4070
Article Processing Fee

Submission Information

Submission Website:

https://www.editorialmanager.com/ANALYTICA-CHIMICA-ACTA

Accepted Types:

original papers
reviews
Short papers

Related Articles

A novel two-dimensional MgB6 crystal: metal-layer stabilized boron kagome lattice

Sheng-Yi Xie, Xian-Bin Li, Nian-Ke Chen, Yeliang Wang, Shengbai Zhang, Hong-Bo Sun

2014-11-07 Paper

DOI: 10.1039/C4CP03728F

Bimodal crystallization at polymer–fullerene interfaces

Dyfrig Môn, Anthony M. Higgins, David James, Mark Hampton, J. Emyr Macdonald, Michael B. Ward, Philipp Gutfreund, Samuele Lilliu, Jonathan Rawle

2014-11-26 Paper

DOI: 10.1039/C4CP04253K

Energetic contributions of residues to the formation of early amyloid-β oligomers

R. Pouplana, J. M. Campanera

2014-12-05 Paper

DOI: 10.1039/C4CP04544K

Reverse hydrotropy by complex formation

Kamil Wojciechowski, Thomas Gutberlet, Vikram Singh Raghuwanshi, Ann Terry

2014-10-16 Paper

DOI: 10.1039/C4CP03835E

Electronic properties of PbX3CH3NH3 (X = Cl, Br, I) compounds for photovoltaic and photocatalytic applications

Sigismund Teunis Alexander George Melissen, Frédéric Labat, Philippe Sautet, Tangui Le Bahers

2014-11-26 Paper

DOI: 10.1039/C4CP04666H

Influence of dispersive forces on the final shape of a reverse micelle

I. León, R. Montero, A. Longarte, José A. Fernández

2014-12-02 Paper

DOI: 10.1039/C4CP03667K

Metastable behavior of noble gas inserted tin and lead fluorides

Sudip Pan, Ashutosh Gupta, Subhajit Mandal, Diego Moreno, Gabriel Merino, Pratim K. Chattaraj

2014-11-11 Paper

DOI: 10.1039/C4CP03856H

Origin of surface trap states in CdS quantum dots: relationship between size dependent photoluminescence and sulfur vacancy trap states

Aisea Veamatahau, Bo Jiang, Tom Seifert, Satoshi Makuta, Kay Latham, Masayuki Kanehara, Toshiharu Teranishi

2014-12-05 Paper

DOI: 10.1039/C4CP04761C

You might also like

Compound Q&A

What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?

Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...

10094-36-7Ethyl 3-cyclohexylpr...
Compound Q&A

How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?

Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...

34783-31-82-(Hydroxymethyl)-5-...
Compound Q&A

How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?

Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...

858-46-82,4,6-Tris(pentafluo...
Compound Q&A

What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?

When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...

56787-36-1Chloroac-nle-oh
Compound Q&A

What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?

Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...

752244-05-6Ethyl 6-phenylimidaz...
Compound Q&A

Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?

Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...

55095-15-3alpha-(2-Bromophenyl...
Compound Q&A

How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?

Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...

139585-48-12-Chloro-5-methoxypy...
Compound Q&A

What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?

1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...

5044-27-91-(4-Methoxyphenyl)-...
Compound Q&A

Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?

There are alternative reagents and compounds that can be used in the synthesis o...

903131-45-33-Bromo-5-(N-Boc)ami...
Compound Q&A

What is Tungsten(IV) oxide (CAS: 12036-22-5)?

Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...

12036-22-5Tungsten(IV) oxide
Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.