Layer-wise physicochemical and elemental distribution in an urban river water, Bangladesh: potential pollution, sources, and human health risk assessment
Literature Information
Md. Abu Bakar Siddique, Sazal Kumar, Khamphe Phoungthong, Md Humayun Kabir, Mir Mohammad Ali
Buriganga is an economically important river located around the industrialized urban area of Dhaka City, Bangladesh. In this study, 17 water quality parameters (electrical conductivity, pH, total suspended solids, temperature, F−, Cl−, SO42−, Cr, Ni, As, Cd, Hg, Cu, Pb, Fe, Mn, and Zn) of surface and deep waters of the Buriganga River were measured to assess the water quality, pollution level, elemental sources, and their potential ecological and human health risks. Comparing the concentrations of the analyzed parameters with the permissible standards, it was indicated that the water in Buriganga is unsafe for residential and recreational uses. Principal component and correlation analysis revealed that point and diffuse sources, such as the combustion of lubricant oils, fuel additives, exhaust fumes from vehicles, domestic wastewater, and inorganic fertilizers from agricultural fields, control the water quality. Regardless of depth, a higher degree of contamination and ecological risk was observed during the dry season, indicating a higher content of heavy metals in river water, which might impact the ecological balance in the future. Through ingestion, the hazard quotient (HQ) of As, Cd, Pb, and Hg and the hazard index (HI) values were higher than the risk threshold (HQ > 1). Total HI values for children in both residential and recreational water were higher than those for adults (1.04 × 101 and 1.73 × 100 for surface and deep water, respectively), indicating that children are more sensitive to elemental contamination. Total carcinogenic risks of Cr and As due to exposure to water were higher than the standard limit (>1.0 × 10−4), which indicated possible cancer risks to the inhabitants around the river. Therefore, regular monitoring of river water quality and sustainable management could be implemented to recover the polluted river water and keep it pollution-free in the future.
Related Literature
New molecular-scale information on polystyrene dynamics in PS and PS–BaTiO3 composites from FTIR spectroscopy
D. Olmos, E. V. Martín, J. González-Benito
DOI: 10.1039/C4CP03516J
Quantifying the dependence of dead lithium losses on the cycling period in lithium metal batteries
Asghar Aryanfar, Daniel J. Brooks, Agustín J. Colussi, Michael R. Hoffmann
DOI: 10.1039/C4CP03590A
Photocatalytic performance of TiO2–zeolite templated carbon composites in organic contaminant degradation
Metta Chareonpanich, Khanin Nueangnoraj, Hirotomo Nishihara, Takashi Kyotani
DOI: 10.1039/C4CP03897E
Water oxidation energy diagrams for photosystem II for different protonation states, and the effect of removing calcium
DOI: 10.1039/C3CP55329A
Deep oxidation of 1,2-dichlorobenzene over Ti-doped iron oxide
Xiaodong Ma, Xueyue Suo, Huiqin Cao, Jie Guo, Lu Lv, Hongwen Sun, Meihua Zheng
DOI: 10.1039/C4CP00979G
Charge storage properties of biopolymer electrodes with (sub)tropical lignins
Ting Yang Nilsson, Olle Inganäs
DOI: 10.1039/C4CP03777D
Halogen bonding of electrophilic bromocarbons with pseudohalide anions
Sergiy V. Rosokha, Charlotte L. Stern, Alan Swartz, Rory Stewart
DOI: 10.1039/C4CP00976B
Spin mixing at level anti-crossings in the rotating frame makes high-field SABRE feasible
Hans-Martin Vieth
DOI: 10.1039/C4CP03765K
You might also like
What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?
Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...
How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?
Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...
How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?
Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...
What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?
When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...
What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?
Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...
Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?
Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...
How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?
Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...
What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?
1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...
Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?
There are alternative reagents and compounds that can be used in the synthesis o...
What is Tungsten(IV) oxide (CAS: 12036-22-5)?
Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...











![[2',6'-bis(propan-2-yloxy)-[1,1'-biphenyl]-3-yl]dicyclohexylphosphane structure [2',6'-bis(propan-2-yloxy)-[1,1'-biphenyl]-3-yl]dicyclohexylphosphane structure](https://static.chemtradehub.com/structs/787/787618-22-8-dda2.webp)



