Determination of soil source using laser induced breakdown spectroscopy combined with feature selection

Literature Information

Publication Date 2023-10-03
DOI 10.1039/D3JA00133D
Impact Factor 4.023
Authors


View Original

Abstract

Determining the soil source is crucial for agricultural planning, forensic case analysis, and archaeological site research. This study used laser induced breakdown spectroscopy (LIBS) technology combined with convolutional neural network (CNN) algorithm to determine the soil source. The experiment collected ten soil samples from different regions and extracted soil spectrum data using LIBS technology. In this study, CNN and random forest (RF) algorithms are used to analyze the data. To improve the accuracy of the model, the mean decrease accuracy (MDA) and mean decrease impurity (MDI) feature selection methods of RF are used to filter the data. Four models were constructed using CNN and RF: MDA-CNN, MDA-RF, MDI-CNN, and MDI-RF, and applied to predict soil sources. The experimental results revealed that the MDA-CNN model performs the best with the accuracy of 94.61%, precision rate of 0.9512, recall rate of 0.9461, and F1 score of 0.9487. The experimental results indicate that this analysis method can effectively determine the soil source, which holds significant implications for the development of soil source determination technology.

Related Literature

A polyhydroxyalkanoate synthesised by halophilic archaeon Natrialba swarupiae

Seema Prabhudev Rodge, Maruti Jayram Dhanavade, Swapnil Chandrakant Kajale, Niranjan Prakashrao Patil

2023-06-22 Paper

DOI: 10.1039/D3VA00091E

Electrospun TiO2/carbon composite nanofibers as effective (photo)electrodes for removal and transformation of recalcitrant water contaminants

Ashley Hesterberg Butzlaff, Madeline Jensen, Chenxu Yan, Abdulsattar Ghanim, Charles Werth, David Cwiertny, Syed Mubeen

2023-05-04 Paper

DOI: 10.1039/D3VA00017F

In situ (bio)remediation treatment options for U and Sr contaminated land: a comparison of radionuclide retention and remobilisation

Gianni F. Vettese, Katherine Morris, Matthew White-Pettigrew, Luke T. Townsend, Samuel Shaw, Christopher Boothman, Jonathan R. Lloyd

2023-08-14 Paper

DOI: 10.1039/D3VA00104K

Non-enzymatic electrochemical sensors based on nanomaterials for detection of organophosphorus pesticide residues

Chuanqin Zhou, Jinxia Feng, Yaling Tian, Yiyong Wu, Quanguo He, Guangli Li, Jun Liu

2023-04-19 Critical Review

DOI: 10.1039/D3VA00045A

2D/2D nitrogen-doped graphitic carbon nitride/cobalt sulfide nanostructures for fast photodegradation of methylene blue dye and real industrial sewage effluents

Sai Bhargava Vuggili, Umesh Kumar Gaur, Tushar Tyagi, Manu Sharma

2023-04-04 Paper

DOI: 10.1039/D2VA00208F

Front cover

2023-01-04 Cover

DOI: 10.1039/D3VA90001K

Planetary ball milling induced piezocatalysis for dye degradation using BaTiO3 ceramics

Akshay Gaur, Vishal Singh Chauhan, Rahul Vaish

2023-01-23 Paper

DOI: 10.1039/D2VA00210H

Back cover

2023-05-09 Cover

DOI: 10.1039/D3VA90017G

Wastewater depollution of textile dyes and antibiotics using unmodified and copper oxide/zinc oxide nanofunctionalised graphene oxide materials

Piumie Rajapaksha, Rebecca Orrell-Trigg, Yen B. Truong, Daniel Cozzolino, Vi Khanh Truong, James Chapman

2022-06-30 Paper

DOI: 10.1039/D2VA00059H

You might also like

Compound Q&A

What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?

Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...

10094-36-7Ethyl 3-cyclohexylpr...
Compound Q&A

How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?

Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...

34783-31-82-(Hydroxymethyl)-5-...
Compound Q&A

How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?

Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...

858-46-82,4,6-Tris(pentafluo...
Compound Q&A

What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?

When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...

56787-36-1Chloroac-nle-oh
Compound Q&A

What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?

Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...

752244-05-6Ethyl 6-phenylimidaz...
Compound Q&A

Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?

Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...

55095-15-3alpha-(2-Bromophenyl...
Compound Q&A

How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?

Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...

139585-48-12-Chloro-5-methoxypy...
Compound Q&A

What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?

1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...

5044-27-91-(4-Methoxyphenyl)-...
Compound Q&A

Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?

There are alternative reagents and compounds that can be used in the synthesis o...

903131-45-33-Bromo-5-(N-Boc)ami...
Compound Q&A

What is Tungsten(IV) oxide (CAS: 12036-22-5)?

Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...

12036-22-5Tungsten(IV) oxide

Source Journal

Journal of Analytical Atomic Spectrometry

Journal of Analytical Atomic Spectrometry
CiteScore: 6.2
Self-citation Rate: 25.8%
Articles per Year: 254

The Journal of Analytical Atomic Spectrometry (JAAS) is the central journal for publishing innovative research on fundamentals, instrumentation, and methods in the determination, speciation and isotopic analysis of (trace) elements within all fields of application. This includes, but is not restricted to, the most recent progress, developments and achievements in all forms of atomic and elemental detection, isotope ratio determination, molecular analysis, plasma-based analysis and X-ray techniques. The journal welcomes full papers, communications, technical notes, critical and tutorial review articles, editorials, and comments, in addition to the Atomic Spectrometry Updates (ASU) literature reviews that are prepared by an expert panel. Submissions are welcome in the following areas, but note this list reflects the current scope and authors are strongly encouraged to contact the Editorial team if they believe that their work offers potentially new and emerging research relevant to the journal remit: Fundamental studies in the following. New and existing sources for atomic emission, absorption, fluorescence and mass spectrometry and those that provide both atomic and molecular information Sample introduction techniques for solids, liquids, gases Improvements in sensitivity, selectivity, precision, accuracy and/or robustness Isotope ratio measurements, including techniques for improving precision and mass bias correction Single channel and multichannel simultaneous detection systems Chemometrics, statistics, calibration techniques and internal standardisation Theoretical and numerical modelling of fundamental processes related to all of the above methodologies Novel or improved methodologies in areas of application including, but not limited to the following. Biosciences, including elemental, speciation and isotopic analysis in biological systems, immunoassays based on metal-labeled antibodies, bio-imaging, and nanoparticle toxicology Geochemistry Environmental science Materials science, including engineered nanoparticles and quantum dots Metrology, including reference materials Forensic analysis Food and agricultural sciences Energy Archaeometry Molecular analysis. Molecular sources for elemental and isotopic analysis Atomic sources for molecular analysis Atomic and molecular techniques simultaneously used for complementary chemical information All contributions are judged on originality and quality of scientific content, and appropriateness of length to content of new science.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.