Structural features that modulate the sharpness of the spin crossover transition in [FeIII(5-X-qsal)2]+ based salts
Literature Information
Bruno J. C. Vieira, Laura C. J. Pereira, Vasco da Gama, João C. Waerenborgh
This study aimed to unveil the structural modifications that can modulate the SCO transition sharpness, occurring up to room temperature, of FeIII compounds with general formula [Fe(5-X-qsal)2]+. These compounds are organized in layers of cationic chains. The structure of a series of compounds with different transition progressions were analyzed and compared to extract the structural differences responsible for the change in magnetic behavior. Two structural differences were found to be responsible for the modulation of the magnetic transition sharpness, in direct correspondence with the degree of interactions between the cations in each chain and between chains. The reinforcement of the interchain connectivity was found to contribute towards the sharpness of the transition. On the contrary, the reinforcement of the interlayer interactions resulted in the broadening of the transition. To achieve sharp transitions, it is necessary to obtain structures able to maximize interchain cation–cation interactions at the same time as they minimize the interlayer interactions.
Related Literature
Photochemical etiology of promising ancestors of the RNA nucleobases
M. M. Brister, M. Pollum, C. E. Crespo-Hernández
DOI: 10.1039/C6CP00639F
Prebiotic synthesis of nucleic acids and their building blocks at the atomic level – merging models and mechanisms from advanced computations and experiments
Rafał Szabla, Robert W. Góra, A. Marco Saitta, Fabio Pietrucci, Franz Saija, Ernesto Di Mauro, Raffaele Saladino, Martin Ferus, Svatopluk Civiš
DOI: 10.1039/C6CP00670A
Probing ultrafast excitation energy transfer of the chlorosome with exciton–phonon variational dynamics
Alejandro Somoza Márquez, Lipeng Chen, Kewei Sun, Yang Zhao
DOI: 10.1039/C5CP06491K
The cis-isomer performs better than the trans-isomer in porphyrin-sensitized solar cells: interfacial electron transport and charge recombination investigations
Liyang Luo, Ram B. Ambre, Sandeep B. Mane, Eric Wei-Guang Diau, Chen-Hsiung Hung
DOI: 10.1039/C5CP02367J
Behaviour of NBD-head group labelled phosphatidylethanolamines in POPC bilayers: a molecular dynamics study
DOI: 10.1039/C5CP01596K
Fluorescence switching of sanguinarine in micellar environments
Sagar Satpathi, Krishna Gavvala, Partha Hazra
DOI: 10.1039/C5CP02818C
Reverse solvatochromism in solvent binary mixtures: a case study using a 4-(nitrostyryl)phenolate as a probe
Rafaela I. Stock, Adriana D. S. Schramm, Marcos C. Rezende, Vanderlei G. Machado
DOI: 10.1039/C6CP03875A
Step dynamics and oxide formation during CO oxidation over a vicinal Pd surface
Mikhail Shipilin, Johan Gustafson, Chu Zhang, Lindsay Richard Merte, Edvin Lundgren
DOI: 10.1039/C5CP07488F
Incorporation of Zn2+ ions into BaTiO3:Er3+/Yb3+ nanophosphor: an effective way to enhance upconversion, defect luminescence and temperature sensing
Tristan Koppe, Tanusree Mondal, Christoph Brüsewitz, Kaushal Kumar, Vineet Kumar Rai, Hans Hofsäss, Ulrich Vetter
DOI: 10.1039/C5CP01874A
You might also like
What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?
Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...
How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?
Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...
How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?
Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...
What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?
When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...
What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?
Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...
Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?
Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...
How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?
Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...
What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?
1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...
Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?
There are alternative reagents and compounds that can be used in the synthesis o...
What is Tungsten(IV) oxide (CAS: 12036-22-5)?
Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...
Source Journal
CrystEngComm

CrystEngComm is the forum for the design and understanding of crystalline materials. We welcome studies on the investigation of molecular behaviour within crystals, control of nucleation and crystal growth, engineering of crystal structures, and construction of crystalline materials with tuneable properties and functions. We publish hypothesis-driven research into… how crystal design affects thermodynamics, phase transitional behaviours, polymorphism, morphology control, solid state reactivity (crystal-crystal solution-crystal, and gas-crystal reactions), optoelectronics, ferroelectric materials, non-linear optics, molecular and bulk magnetism, conductivity and quantum computing, catalysis, absorption and desorption, and mechanical properties. Using Techniques and methods including… Single crystal and powder X-ray, electron, and neutron diffraction, solid-state spectroscopy, spectrometry, and microscopy, modelling and data mining, and empirical, semi-empirical and ab-initio theoretical evaluations. On crystalline and solid-state materials. We particularly welcome work on MOFs, coordination polymers, nanocrystals, host-guest and multi-component molecular materials. We also accept work on peptides and liquid crystals. All papers should involve the use or development of a design or optimisation strategy. Routine structural reports or crystal morphology descriptions, even when combined with an analysis of properties or potential applications, are generally considered to be outside the scope of the journal and are unlikely to be accepted.














