Electrokinetic generation of iron-rich barriers in soils: realising the potential for nuclear site management and decommissioning
Literature Information
Jamie M. Purkis, Frances Burrell, James R. Brydie, James Graham, Laurence Hopkinson, Andrew B. Cundy
Following earlier field-scale pilot work on nuclear site materials in the late 2000s, there has recently been renewed research and industry interest in the application of electrokinetic technologies for nuclear site management and remediation in the UK. One relatively novel application of electrokinetics is the use of sacrificial steel electrodes (coupled with an in situ generated pH–Eh gradient in the treated material) to precipitate sub-surface iron-rich barriers for groundwater and/or leachate containment, which could be used to grout or contain contaminated fluids in the sub-surface on working nuclear sites or sites undergoing decommissioning. Here, we report previously unpublished data from two work programmes exploring the higher Technology Readiness Level (TRL) application of this electrokinetic iron-barrier approach to materials typical of those found in the subsurface of the Sellafield nuclear licensed site, UK. The first programme, funded by the UK National Nuclear Laboratory (NNL), assessed the electrokinetic generation of iron-rich barriers at metre + scale in simulated Sellafield materials, while the second programme, funded under the current UK TRANSCEND consortium project, examined electrokinetic iron-barrier formation at smaller (<1 m) scale, but in real site materials. Both programmes indicate that iron-rich barriers can be conveniently and electrokinetically grown in different geometries over reasonable timescales (months) in realistic site subsurface materials (sands), in electrolytes similar to natural waters found in the environment. Voltage requirements are low (<1 V cm−1) with energy and consumables costs of no more than single-digit or tens of US dollars at the metre-plus scale. Further work is needed however to assess the longevity of the iron precipitates forming the subsurface barrier, and to explore barrier generation at the geometries and scales required for (site specific) field application.
Recommended Journals

Anti-Corrosion Methods and Materials

Bulletin of the Chemical Society of Japan

Canadian Metallurgical Quarterly

Chemistry of Heterocyclic Compounds

Carbon

Australian Journal of Chemistry

Advances in Colloid and Interface Science

Ferroelectrics

Journal of the American Chemical Society

Cement and Concrete Research
Related Literature
Unimolecular reaction chemistry of a charge-tagged beta-hydroxyperoxyl radical
Sui So, Gabriel da Silva
DOI: 10.1039/C4CP02981J
Performance analysis of energy conversion via caloric effects in first-order ferroic phase transformations
DOI: 10.1039/C4CP00938J
Interaction of crystal water with the building block in Y2Mo3O12 and the effect of Ce3+ doping
Xiansheng Liu, Yongguang Cheng, Erjun Liang, Mingju Chao
DOI: 10.1039/C4CP00144C
Linear and nonlinear optical properties of indeno[2,1-b]fluorene and its structural isomers
Simil Thomas, Kwang S. Kim
DOI: 10.1039/C4CP03169E
Morphology and surface properties of LiVOPO4: a first principles study
Jingping Zhang, Fengmei Yang
DOI: 10.1039/C4CP03628J
New molecular-scale information on polystyrene dynamics in PS and PS–BaTiO3 composites from FTIR spectroscopy
D. Olmos, E. V. Martín, J. González-Benito
DOI: 10.1039/C4CP03516J
Halogen bonding of electrophilic bromocarbons with pseudohalide anions
Sergiy V. Rosokha, Charlotte L. Stern, Alan Swartz, Rory Stewart
DOI: 10.1039/C4CP00976B
Characterization of organic fluorophores for in vivo FRET studies based on electroporated molecules
A. Plochowietz, R. Crawford, A. N. Kapanidis
DOI: 10.1039/C4CP00995A
You might also like
What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?
Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...
How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?
Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...
How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?
Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...
What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?
When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...
What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?
Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...
Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?
Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...
How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?
Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...
What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?
1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...
Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?
There are alternative reagents and compounds that can be used in the synthesis o...
What is Tungsten(IV) oxide (CAS: 12036-22-5)?
Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...





