Alternate pathway for standard SCR on Cu-zeolites with gas-phase ammonia
Literature Information
Rohil Daya, Christopher J. Keturakis, Dylan Trandal, Ashok Kumar, Saurabh Y. Joshi, Aleksey Yezerets
Redox mechanisms have been theorized for the selective catalytic reduction (SCR) of NOx over small-pore Cu-zeolites. These mechanisms generally rely on NH3 solvation of active copper sites as the initial step in the reduction half cycle for standard SCR. In this work, we demonstrate that this pre-requisite for NH3 solvation of active copper sites is inconsistent with experimental data for initial NO consumption under SCR conditions. Reactor data under standard SCR and reduction half cycle (no O2) conditions shows instantaneous consumption of NO upon introduction of NO and NH3. However, detailed and global kinetic models relying on a sequential adsorption–conversion mechanism predict an initial delay in NO consumption associated with the relatively slow macroscopic coverage dynamics. These model discrepancies at low NH3 coverage are quantitatively resolved by relaxing the pre-requisite of NH3 storage for NOx conversion, via an alternate SCR pathway utilizing gas-phase NH3. Addition of this standard SCR reaction via gas-phase NH3 leads to predicted NH3 reaction orders >1 at low NH3 coverage, confirmed subsequently by experiments. The results shown here are consistent with an energetically feasible mechanistic pathway involving the reduction of copper sites by NO to generate mobile HONO intermediates, which can potentially react with gas-phase NH3 in the zeolite cages.
Related Literature
Selective internuclear coupling estimation in the solid-state NMR of multiple-spin systems
Andrea C. Sauerwein, Maria Concistrè, Malcolm H. Levitt
DOI: 10.1039/C0CP01262A
Experimental and theoretical characterization of molecular complexes formed between OCS and XY molecules (X, Y = F, Cl and Br) and their role in photochemical matrix reactions
A. Lorena Picone, Helge Willner, Anthony J. Downs, Rosana M. Romano
DOI: 10.1039/B914862K
Mitochondrial biofuel cells: expanding fuel diversity to amino acids
Dushyant Bhatnagar, Shuai Xu, Caitlin Fischer, Robert L. Arechederra, Shelley D. Minteer
DOI: 10.1039/C0CP01362E
The interaction of H2O2 with ice surfaces between 203 and 233 K
N. Pouvesle, M. Kippenberger, G. Schuster, J. N. Crowley
DOI: 10.1039/C0CP01656J
Low-temperature heat capacities of 1-alkyl-3-methylimidazolium bis(oxalato)borate ionic liquids and the influence of anion structural characteristics on thermodynamic properties
Miao Yang, Jun-Ning Zhao, Qing-Shan Liu, Li-Xian Sun, Pei-Fang Yan, Urs Welz-Biermann
DOI: 10.1039/C0CP01744B
One-step covalent microcontact printing approach to produce patterns of lactate oxidase
E. Casero, M. D. Petit-Domínguez, A. M. Parra-Alfambra, M. J. Gismera, F. Pariente, E. Lorenzo, L. Vázquez
DOI: 10.1039/B922805E
Using one-step perturbation to predict the folding equilibrium of differently stereochemically substituted β-peptides
Wilfred F. van Gunsteren
DOI: 10.1039/C0CP00833H
Similarity between the kinetic parameters of the buffer-mediated proton exchange reaction of a xanthenic derivative in its ground- and excited-state
Jose M. Paredes, Angel Orte, Luis Crovetto, Jose M. Alvarez-Pez, Ramon Rios, Maria J. Ruedas-Rama, Eva M. Talavera
DOI: 10.1039/B917333C
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Reaction Chemistry & Engineering

Reaction Chemistry & Engineering is an interdisciplinary journal reporting cutting-edge research focused on enhancing the understanding and efficiency of reactions. Reaction engineering leverages the interface where fundamental molecular chemistry meets chemical engineering and technology. Challenges in chemistry can be overcome by the application of new technologies, while engineers may find improved solutions for process development from the latest developments in reaction chemistry. Reaction Chemistry & Engineering is a unique forum for researchers whose interests span the broad areas of chemical engineering and chemical sciences to come together in solving problems of importance to wider society. All papers should be written to be approachable by readers across the engineering and chemical sciences. Papers that consider multiple scales, from the laboratory up to and including plant scale, are particularly encouraged.














