Cu/graphene interdigitated electrodes with various copper thicknesses for UV-illumination-enhanced gas sensors at room temperature

Effective detection of NO2 and NH3 gases at room temperature (RT) is critical for environmental monitoring and protection. Here, graphene-based gas sensors (Cu/Gr device) of single layer graphene decorated by 6, 8 and 10 nm thick Cu layers with graphene instead of conventional metal as interdigital electrodes are designed and fabricated. The RT performance for both NO2 and NH3 detection can be greatly enhanced by UV light illumination which is closely related to the thickness of Cu layers in which the device with 8 nm thickness (8 nm Cu/Gr device) exhibits the best performances. Analysis of XPS reveals that Cu is partly oxidized to Cu+ and Cu2+ for 6 nm with extra Cuδ+ (1 < δ < 2) for 8 and 10 nm. The contents and distributions of copper oxides and copper in Cu layers influence the catalytic effects and the heterojunction barrier and thus the performances. The RT responses of −30.9% and −8.1% for 5 and 0.3 ppm NO2, and of +29.1% and +5.9% for 105 and 10 ppm NH3 are achieved for the 8 nm Cu/Gr device, respectively. The limits of detection (LODs) for NO2 and NH3 are 12 ppb and 17 ppb, respectively. The sensing mechanisms are discussed in terms of density functional theory (DFT) calculations and energy band diagrams. The study demonstrates an effective solution of improving the device performance by modifying the device configuration and incorporating combined oxides naturally oxidized, which provides the novel design alternatives for high performance sensors.