Explaining the optical spectrum of CrF2 and CuF2 model materials: role of the tetragonal to monoclinic instability

Literature Information

Publication Date 2019-05-13
DOI 10.1039/C9CP01822K
Impact Factor 3.676
Authors

J. A. Aramburu, M. Moreno


View Original

Abstract

The properties of MF2 (M = Cr, Cu) model compounds are usually interpreted assuming a Jahn–Teller effect leading to elongated MF64− units. By means of the analysis of experimental data and first-principles calculations on both the monoclinic P21/c structure and the parent rutile structure (tetragonal P42/mnm space group), we prove that such an assumption is not correct. It is shown that in MF2 compounds, the MF64− complexes are actually compressed in the parent phase but along a different direction, a situation that is however hidden by an additional orthorhombic instability due to a negative force constant of b2g and b3g modes of the cell. This distortion plays a key role in understanding the high experimental value of the lowest d–d transition energy, E1 = 1.23 and 0.93 eV for CrF2 and CuF2, respectively, when compared to the value E1 = 0.40 eV derived for the Jahn–Teller system of KZnF3:Cu2+. Aside from reproducing reasonably the experimental values of spin allowed d–d transitions of both compounds, our first-principles calculations show the existence of an accidental degeneracy involving the yz and xy levels in the final P21/c structure. Moreover, the internal electric field of CrF2 and CuF2 is found to be much less anisotropic than in layered compounds like K2CuF4 and thus it has little influence on the d–d transition energy. The influence of the (3z2 − r2) − (x2 − y2) hybridization, caused by the orthorhombic distortion, on the electronic density and the magnetic coupling between layers is also briefly discussed. The present results stress that the interpretation of experimental data using simple parameterized models can lead to wrong conclusions.

Related Literature

Forced gradient copolymerisation: a simplified approach for polymerisation-induced self-assembly

Sihao Xu, Nathaniel Corrigan, Cyrille Boyer

2020-07-20 Paper

DOI: 10.1039/D0PY00889C

Pyridyl disulfide-based thiol–disulfide exchange reaction: shaping the design of redox-responsive polymeric materials

Ismail Altinbasak, Mehmet Arslan

2020-11-25 Review Article

DOI: 10.1039/D0PY01215G

3D Printing of a self-healing, high strength, and reprocessable thermoset

Tianyu Yuan, Lisha Zhang, Tony Li, Ruowen Tu

2020-09-01 Paper

DOI: 10.1039/D0PY00819B

Cellulose-based polyacetals by direct and sensitized photocationic ring-opening polymerization of levoglucosenyl methyl ether

Kerem Kaya, Tapas Debsharma, Helmut Schlaad

2020-10-19 Communication

DOI: 10.1039/D0PY01307B

Contents list

Front/Back Matter

DOI: 10.1039/D0PY90177F

Recent advances in poly(3,4-ethylenedioxyselenophene) and related polymers

2020-10-22 Review Article

DOI: 10.1039/D0PY01191F

Cubic POSS engineering of photosensitizer-doped semiconducting polymer nanoparticles for enhanced fluorescence imaging and amplified photodynamic therapy

Biqing Bao, Xue Zhai, Tianqi Liu, Peng Su, Luyao Zhou, Yu Xu, Bingbing Gu, Lianhui Wang

2020-10-08 Paper

DOI: 10.1039/D0PY01199A

Photoactive rose bengal-based latex via RAFT emulsion polymerization-induced self-assembly

Charlène Boussiron, Mickaël Le Bechec, Julia Sabalot, Sylvie Lacombe, Maud Save

2020-10-13 Paper

DOI: 10.1039/D0PY01128B

Synthesis of a multicyclic polymer with hyperbranched structure by click polymerization of an AB2 cyclic macromonomer

Chao Liu, Hua-Long Zhang, Wen Xu, Cai-Yuan Pan, Chun-Yan Hong

2021-01-04 Paper

DOI: 10.1039/D0PY01604G

You might also like

Compound Q&A

What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?

1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...

141290-59-71H-Indazole-6-carbon...
Compound Q&A

How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?

Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...

2997-85-5Dioctyl (2E)-2-buten...
Compound Q&A

What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?

Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...

68291-98-5Sodium [(1,2-benzoxa...
Compound Q&A

Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?

Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...

741709-66-0Dimethyl 4-(4,4,5,5-...
Compound Q&A

How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?

Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...

80714-39-22-Fluoro-6-hydrazino...
Compound Q&A

What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?

6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...

499214-11-86-Formyl-2-pyridinec...
900874-91-13-(3,4-dimethoxyphen...
Compound Q&A

How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?

9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...

29875-73-89H-Tribenzo[b,d,f]az...
Compound Q&A

How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?

1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...

1797982-51-41-Cyclopropyl-7-etho...
Compound Q&A

How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?

Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...

671820-52-3Methyl 3-oxo-1,2,3,4...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.