Comparison of quenching mechanisms in Gd3Al5−xGaxO12:Ce3+ (x = 3 and 5) garnet phosphors by photocurrent excitation spectroscopy

Literature Information

Publication Date 2018-06-11
DOI 10.1039/C8CP03176B
Impact Factor 3.676
Authors

Tadeusz Lesniewski, Sebastian Mahlik, Kazuki Asami, Jumpei Ueda, Marek Grinberg, Setsuhisa Tanabe


View Original

Abstract

In this work we present the results of photocurrent excitation spectroscopy (PCE) of Gd3Al2Ga3O12:Ce3+ (GAGG:Ce3+) and Gd3Ga5O12:Ce3+ (GGG:Ce3+) performed at temperatures ranging from 100 to 500 K supplemented by spectroscopic measurements (steady state and time resolved photoluminescence spectroscopy) performed at temperatures ranging from 10 to 500 K and at high pressure up to 300 kbar. The PCE spectra contain bands related to transitions from the ground state 2F5/2 of the 4f1 electronic configuration to the crystal field split states related to the 5d1 electronic configuration of Ce3+. This implicates the presence of the autoionization process – transfer of electrons from the localized, excited states of Ce3+ to the conduction band (CB), directly linked to luminescence quenching of Ce3+. The mechanism of autoionization of GAGG:Ce3+ and GGG:Ce3+ was determined to be different on the grounds of differences in temperature dependence of photocurrent intensity. The latter system exhibits autoionization, which occurs when all of the 5d excited states are degenerated with the CB, whereas in the former system, the autoionization process is thermally assisted with an activation energy barrier (distance to the edge of the CB) of approximately 1600 cm−1. In GGG:Ce3+ the degeneracy of 5d1 states of Ce3+ was lifted by application of high pressure, shifting the edge of the CB up and exposing Ce3+ luminescence at 20 kbar. Further spectroscopic analyses of the pressure–temperature dependence of the luminescence decay time as well as the temperature dependence of photocurrent intensity of GGG:Ce3+ have independently shown existence of a luminescence quenching state located approximately 600 cm−1 below the CB, attributed to the impurity trapped exciton.

Related Literature

An in vivo quantitative Raman-pH sensor of arterial blood based on laser trapping of erythrocytes

Manman Lin, Bin Xu, Huilu Yao, Aiguo Shen, Jiming Hu

2016-03-23 Paper

DOI: 10.1039/C5AN02315G

Biosensor surface functionalization by a simple photochemical immobilization of antibodies: experimental characterization by mass spectrometry and surface enhanced Raman spectroscopy

Bartolomeo Della Ventura, Martina Banchelli, Riccardo Funari, Anna Illiano, Marella De Angelis, Paola Taroni, Angela Amoresano, Paolo Matteini, Raffaele Velotta

2019-10-10 Paper

DOI: 10.1039/C9AN00443B

Front cover

Cover

DOI: 10.1039/C6AN90044E

Ultrasensitive enrichment of phosphopeptides with Ti4+ immobilized SiO2 graphene-like multilayer nanosheets

Dongpo Xu, Mingxia Gao, Chunhui Deng, Xiangmin Zhang

2016-04-18 Paper

DOI: 10.1039/C6AN00361C

Cascaded multiple recycling amplifications for aptamer-based ultrasensitive fluorescence detection of protein biomarkers

Yao Qin, Daxiu Li, Ruo Yuan, Yun Xiang

2019-09-27 Paper

DOI: 10.1039/C9AN01674K

Applications of MALDI-TOF MS in environmental microbiology

Inês C. Santos

2016-04-07 Minireview

DOI: 10.1039/C6AN00131A

A novel platform self-assembled from squaraine-embedded Zn(ii) complexes for selective monitoring of ATP and its level fluctuation in mitotic cells

Ruizhi Feng, Yongqian Xu, Hongwei Zhao, Xuemei Duan, Shiguo Sun

2016-04-26 Communication

DOI: 10.1039/C6AN00646A

Exonuclease III-assisted signal amplification strategy for sensitive fluorescence detection of polynucleotide kinase based on poly(thymine)-templated copper nanoparticles

Han Zhao, Ying Yan, Mingjian Chen, Tingting Hu, Kefeng Wu, Haisheng Liu, Changbei Ma

2019-10-07 Paper

DOI: 10.1039/C9AN01659G

A BODIPY-carbazole hybrid as a fluorescent probe: the design, synthesis, and discrimination of surfactants and the determination of the CMC values

Xiao-xiao Niu, Qin-chao Xu, An-zhen Li, Yang-jie Li, Xiao-tai Zhang, Guo-wen Xing

2019-10-18 Communication

DOI: 10.1039/C9AN01940E

SERS-based immunoassay using gold-patterned array chips for rapid and sensitive detection of dual cardiac biomarkers

Ziyi Cheng, Rui Wang, Yanlong Xing, Linlu Zhao, Jaebum Choo, Fabiao Yu

2019-09-20 Paper

DOI: 10.1039/C9AN01260E

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.