X-ray-induced sample damage at the Mn L-edge: a case study for soft X-ray spectroscopy of transition metal complexes in solution

Literature Information

Publication Date 2018-06-04
DOI 10.1039/C8CP03094D
Impact Factor 3.676
Authors

Markus Kubin, Jan Kern, Meiyuan Guo, Erik Källman, Rolf Mitzner, Vittal K. Yachandra, Marcus Lundberg, Junko Yano, Philippe Wernet


View Original

Abstract

X-ray induced sample damage can impede electronic and structural investigations of radiation-sensitive samples studied with X-rays. Here we quantify dose-dependent sample damage to the prototypical MnIII(acac)3 complex in solution and at room temperature for the soft X-ray range, using X-ray absorption spectroscopy at the Mn L-edge. We observe the appearance of a reduced MnII species as the X-ray dose is increased. We find a half-damage dose of 1.6 MGy and quantify a spectroscopically tolerable dose on the order of 0.3 MGy (1 Gy = 1 J kg−1), where 90% of MnIII(acac)3 are intact. Our dose-limit is around one order of magnitude lower than the Henderson limit (half-damage dose of 20 MGy) which is commonly employed for protein crystallography with hard X-rays. It is comparable, however, to the dose-limits obtained for collecting un-damaged Mn K-edge spectra of the photosystem II protein, using hard X-rays. The dose-dependent reduction of MnIII observed here for solution samples occurs at a dose limit that is two to four orders of magnitude smaller than the dose limits previously reported for soft X-ray spectroscopy of iron samples in the solid phase. We compare our measured to calculated spectra from ab initio restricted active space (RAS) theory and discuss possible mechanisms for the observed dose-dependent damage of MnIII(acac)3 in solution. On the basis of our results, we assess the influence of sample damage in other experimental studies with soft X-rays from storage-ring synchrotron radiation sources and X-ray free-electron lasers.

Related Literature

Voltammetry and in situscanning tunnelling spectroscopy of osmium, iron, and ruthenium complexes of 2,2′:6′,2′′-terpyridine covalently linked to Au(111)-electrodes

Princia Salvatore, Allan Glargaard Hansen, Thomas Bjørnholm, Richard John Nichols, Jens Ulstrup

2011-06-23 Paper

DOI: 10.1039/C1CP21197H

A theoretical study of pure and mixed caesium clusters and cluster ions, CslHmO 0/+n, l ≤ 5: geometry, energetics and photofragmentation

Sebastian Krapf, Maria Schill, Sebastian Krötz, Thorsten Koslowski

2011-07-14 Paper

DOI: 10.1039/C1CP21274E

Resonant dissociative electron attachments to cysteine and cystine

Yong-Feng Wang, Shan Xi Tian, Jinlong Yang

2011-07-25 Paper

DOI: 10.1039/C1CP21267B

Platinum-nanogaps for single-molecule electronics: room-temperature stability

Ferry Prins, Ahson J. Shaikh, Jan H. van Esch, Rienk Eelkema, Herre S. J. van der Zant

2011-05-09 Paper

DOI: 10.1039/C1CP20555B

Graphical prediction of quantum interference-induced transmission nodes in functionalized organic molecules

Troels Markussen, Robert Stadler, Kristian S. Thygesen

2011-06-28 Paper

DOI: 10.1039/C1CP20924H

Nanoparticle-coated separators for lithium-ion batteries with advanced electrochemical performance

Jason Fang, Antonios Kelarakis, Yueh-Wei Lin, Chi-Yun Kang, Ming-Huan Yang, Cheng-Liang Cheng, Yue Wang, Emmanuel P. Giannelis, Li-Duan Tsai

2011-07-06 Communication

DOI: 10.1039/C1CP22017A

A layered structure at the surface of P3HT/PCBM blends

Natalya Schmerl, Gunther Andersson

2011-07-18 Paper

DOI: 10.1039/C1CP20734B

Hydroxideoxidation and peroxide formation at embedded binuclear transition metal sites; TM = Cr, Mn, Fe, Co

M. Busch, E. Ahlberg, I. Panas

2011-07-20 Paper

DOI: 10.1039/C1CP20487D

μ-XAFS of a single particle of a practical NiOx/Ce2Zr2Oy catalyst

Tomoya Uruga, Hajime Tanida, Yasuko Terada, Yasuhiro Iwasawa, Shin-ichi Ohkoshi

2011-06-08 Communication

DOI: 10.1039/C1CP20895K

You might also like

155412-88-71-(3-Aminophenyl)-3-...
Compound Q&A

How should waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 19132-12-8) be handled?

Waste containing 1-(D-Ribofuranosyl)-1,4-dihydro-3-pyridinecarboxamide (CAS: 191...

19132-12-81-(D-Ribofuranosyl)-...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 2007919-81-3)?

2-Methyl-2-propanyl 3-bromo-3-(hydroxymethyl)-1-azetidinecarboxylate (CAS: 20079...

2007919-81-32-Methyl-2-propanyl ...
Compound Q&A

What is N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0)?

N-(4-Chloro-2-pyridinyl)acetamide (CAS: 245056-66-0) is a chemical compound with...

245056-66-0N-(4-Chloro-2-pyridi...
Compound Q&A

What is 5-Chloro-2-hydroxybenzoic acid (CAS: 321-14-2)?

5-Chloro-2-hydroxybenzoic acid, also known as 5-chlorosalicylic acid, is an arom...

321-14-25-Chloro-2-hydroxybe...
Compound Q&A

What precautions should be taken when handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6)?

When handling 1,1-Dichloro-1-fluoroethane (CAS: 1717-00-6), it is important to u...

1717-00-61,1-Dichloro-1-fluor...
Compound Q&A

What are the physical and chemical properties of Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid (CAS: 281655-32-1)?

Fmoc-(2S,3R)-3-phenylpyrrolidine-2-carboxylic acid is a white crystalline solid ...

281655-32-1Fmoc-(2S,3R)-3-pheny...
Compound Q&A

What are the main uses of 4-Amino-5-bromo-2-pyridinecarboxylic acid (CAS: 1363381-01-4)?

4-Amino-5-bromo-2-pyridinecarboxylic acid is primarily used as a precursor in th...

1363381-01-44-Amino-5-bromo-2-py...
1007881-98-2(S)-tert-butyl 2-((2...
Compound Q&A

What precautions should be taken when handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one (CAS: 688363-73-7)?

When handling 8-bromo-2,2-dimethyl-3,4-dihydro-2H-1,4-benzoxazin-3-one, use prop...

688363-73-78-bromo-2,2-dimethyl...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.