Detection of the electronic structure of iron-(iii)-oxo oligomers forming in aqueous solutions

Literature Information

Publication Date 2017-11-13
DOI 10.1039/C7CP06945F
Impact Factor 3.676
Authors

Katrin Kraffert, Marvin N. Pohl, Ralph Kraehnert, Franziska Emmerling, Bernd Winter


View Original

Abstract

The nature of the small iron-oxo oligomers in iron-(III) aqueous solutions has a determining effect on the chemical processes that govern the formation of nanoparticles in aqueous phase. Here we report on a liquid-jet photoelectron-spectroscopy experiment for the investigation of the electronic structure of the occurring iron-oxo oligomers in FeCl3 aqueous solutions. The only iron species in the as-prepared 0.75 M solution are Fe3+ monomers. Addition of NaOH initiates Fe3+ hydrolysis which is followed by the formation of iron-oxo oligomers. At small enough NaOH concentrations, corresponding to approximately [OH]/[Fe] = 0.2–0.25 ratio, the iron oligomers can be stabilized for several hours without engaging in further aggregation. Here, we apply a combination of non-resonant as well as iron 2p and oxygen 1s resonant photoelectron spectroscopy from a liquid microjet to detect the electronic structure of the occurring species. Specifically, the oxygen 1s partial electron yield X-ray absorption (PEY-XA) spectra are found to exhibit a peak well below the onset of liquid water and OH− (aq) absorption. The iron 2p absorption gives rise to signal centered between the main absorption bands typical for aqueous Fe3+. Absorption bands in both PEY-XA spectra are found to correlate with an enhanced photoelectron peak near 20 eV binding energy, which demonstrates the sensitivity of resonant photoelectron (RPE) spectroscopy to mixing between iron and ligand orbitals. These various signals from the iron-oxo oligomers exhibit maximum intensity at [OH]/[Fe] = 0.25 ratio. For the same ratio, we observe changes in the pH as well as in complementary Raman spectra, which can be assigned to the transition from monomeric to oligomeric species. At approximately [OH]/[Fe] = 0.3 we begin to observe particles larger than 1 nm in radius, detected by small-angle X-ray scattering.

Related Literature

Orientation and conformation of octadecyl rhodamine B in hybrid Langmuir–Blodgett monolayers containing clay minerals

Robin H. A. Ras, Cliff T. Johnston, Imre Dékány, Robert A. Schoonheydt

2004-10-11 Paper

DOI: 10.1039/B411339J

A fulleropyrrolidine end-capped platinum-acetylide triad: the mechanism of photoinduced charge transfer in organometallic photovoltaic cells

Fengqi Guo, Katsu Ogawa, Young-Gi Kim, Evgeny O. Danilov, Felix N. Castellano, John R. Reynolds, Kirk S. Schanze

2007-04-03 Paper

DOI: 10.1039/B700379J

Back cover

2004-11-30 Front/Back Matter

DOI: 10.1039/B418050J

Modified Shepard interpolation method applied to trapping mediated adsorption dynamics

P. N. Abufager, C. Crespos, H. F. Busnengo

2007-03-07 Paper

DOI: 10.1039/B617209A

Imaging the nonadiabatic dynamics of the CH3 + HCl reaction

Bertrand Retail, Stuart J. Greaves, Julie K. Pearce, Rebecca A. Rose, Andrew J. Orr-Ewing

2007-05-03 Paper

DOI: 10.1039/B704463A

Back cover

Front/Back Matter

DOI: 10.1039/B708959G

Dye-sensitized nanocrystalline solar cells

Laurence M. Peter

2007-01-25 Invited Article

DOI: 10.1039/B617073K

Heterogeneous reactions of HOI, ICl and IBr on sea salt and sea salt proxies

J. N. Crowley, G. Schuster

2007-04-26 Paper

DOI: 10.1039/B700829E

Back matter

2004-12-17 Front/Back Matter

DOI: 10.1039/B418049F

You might also like

Compound Q&A

What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?

Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...

10094-36-7Ethyl 3-cyclohexylpr...
Compound Q&A

How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?

Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...

34783-31-82-(Hydroxymethyl)-5-...
Compound Q&A

How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?

Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...

858-46-82,4,6-Tris(pentafluo...
Compound Q&A

What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?

When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...

56787-36-1Chloroac-nle-oh
Compound Q&A

What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?

Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...

752244-05-6Ethyl 6-phenylimidaz...
Compound Q&A

Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?

Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...

55095-15-3alpha-(2-Bromophenyl...
Compound Q&A

How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?

Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...

139585-48-12-Chloro-5-methoxypy...
Compound Q&A

What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?

1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...

5044-27-91-(4-Methoxyphenyl)-...
Compound Q&A

Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?

There are alternative reagents and compounds that can be used in the synthesis o...

903131-45-33-Bromo-5-(N-Boc)ami...
Compound Q&A

What is Tungsten(IV) oxide (CAS: 12036-22-5)?

Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...

12036-22-5Tungsten(IV) oxide

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.