Interfacial electronic structure of Cl6SubPc non-fullerene acceptors in organic photovoltaics using soft X-ray spectroscopies

Literature Information

Publication Date 2017-11-09
DOI 10.1039/C7CP04876A
Impact Factor 3.676
Authors

Hyunbok Lee, Sun Woo Ahn, Sim Hee Ryu, Bo Kyung Ryu, Myeung Hee Lee, Sang Wan Cho, Kevin E. Smith


View Original

Abstract

In organic photovoltaics (OPVs), determining the energy-level alignment of a donor and an acceptor is particularly important since the interfacial energy gap between the highest occupied molecular orbital (HOMO) level of a donor and the lowest unoccupied molecular orbital (LUMO) level of an acceptor (EDHOMO–EALUMO) gives the theoretical maximum value of the open-circuit voltage (VOC). To increase the EDHOMO–EALUMO, non-fullerene acceptors, which have a lower electron affinity (EA) than C60, are receiving increasing attention. In this study, we investigated the energy-level alignment at the interface of a boron chloride subphthalocyanine (SubPc) donor and a halogenated SubPc (Cl6SubPc) acceptor using soft X-ray spectroscopy techniques. The estimated EDHOMO–EALUMO of Cl6SubPc/SubPc was 1.95 eV, which was significantly higher than that of 1.51 eV found at the interface of C60/SubPc. This increased EDHOMO–EALUMO was the origin of the enhanced VOC in OPVs. Additionally, we studied the molecular orientation of Cl6SubPc using angle-dependent X-ray absorption spectroscopy. The highly disordered Cl6SubPc molecules result in low carrier mobility, which contributes to the lower short-circuit current density of the Cl6SubPc acceptor OPVs than the C60 acceptor OPVs.

Related Literature

The electrophilic effect of thiol groups on thiol–yne thermal click polymerization for hyperbranched polythioether

Bo Zhao, Shengying Cai, Chao Gao

2015-03-24 Review Article

DOI: 10.1039/C5PY00307E

Selective degradation in aliphatic block copolyesters by controlling the heterogeneity of the amorphous phase

Veluska Arias, Peter Olsén, Karin Odelius, Anders Höglund, Ann-Christine Albertsson

2015-03-17 Paper

DOI: 10.1039/C5PY00136F

Mussel-inspired protein-repelling ambivalent block copolymers: controlled synthesis and characterization

Nagaraj Patil, Céline Falentin-Daudré, Christine Jérôme, Christophe Detrembleur

2015-02-19 Paper

DOI: 10.1039/C5PY00127G

Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers

Deborah K. Schneiderman, Erin M. Hill, Mark T. Martello, Marc A. Hillmyer

2015-04-17 Paper

DOI: 10.1039/C5PY00202H

Synthesis of polyurethane containing carbon–carbon double bonds to prepare functionalizable ultrafine fibers via electrospinning

Wenwen Xue, Lisheng Zhang, Haizhen Chen, Jinggang Wang, Haining Na, Jin Zhu

2015-04-08 Paper

DOI: 10.1039/C5PY00107B

Modular construction of macrocycle-based topological polymers via high-efficient thiol chemistry

Junfei Zhao, Yanyan Zhou, Yiwen Li, Xiangqiang Pan, Wei Zhang, Nianchen Zhou, Ke Zhang, Zhengbiao Zhang, Xiulin Zhu

2015-02-18 Paper

DOI: 10.1039/C5PY00174A

Chiral surfactants for dispersing carbon nanotubes

Pengcheng Lin, Yuehua Cong, Baoyan Zhang

2015-03-05 Paper

DOI: 10.1039/C5PY00040H

Sensitive and reliable detection of glass transition of polymers by fluorescent probes based on AIE luminogens

Suping Bao, Qihua Wu, Qiuling Yu, Jing Wang, Guodong Liang

2015-03-17 Paper

DOI: 10.1039/C5PY00308C

You might also like

Compound Q&A

What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?

Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...

10094-36-7Ethyl 3-cyclohexylpr...
Compound Q&A

How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?

Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...

34783-31-82-(Hydroxymethyl)-5-...
Compound Q&A

How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?

Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...

858-46-82,4,6-Tris(pentafluo...
Compound Q&A

What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?

When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...

56787-36-1Chloroac-nle-oh
Compound Q&A

What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?

Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...

752244-05-6Ethyl 6-phenylimidaz...
Compound Q&A

Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?

Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...

55095-15-3alpha-(2-Bromophenyl...
Compound Q&A

How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?

Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...

139585-48-12-Chloro-5-methoxypy...
Compound Q&A

What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?

1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...

5044-27-91-(4-Methoxyphenyl)-...
Compound Q&A

Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?

There are alternative reagents and compounds that can be used in the synthesis o...

903131-45-33-Bromo-5-(N-Boc)ami...
Compound Q&A

What is Tungsten(IV) oxide (CAS: 12036-22-5)?

Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...

12036-22-5Tungsten(IV) oxide

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.