A novel naphthalimide scaffold based iodonium salt as a one-component photoacid/photoinitiator for cationic and radical polymerization under LED exposure
Literature Information
N. Zivic, M. Bouzrati-Zerrelli, S. Villotte, F. Morlet-Savary, C. Dietlin, F. Dumur, D. Gigmes, J. P. Fouassier, J. Lalevée
A strong drawback of the photoinitiators of cationic polymerization or photoacids is the photosensitivity for short and energetic wavelengths preventing their general use (specialized photochemical equipment with safety concerns must be used). In the present paper, a novel iodonium salt bearing a naphthalimide moiety (naphthalimide-Ph-I+-Ph) is proposed as a one-component photoinitiator/photoacid operating at longer and safer wavelengths (i.e. violet light emitting diodes at 365, 385 nm and 395 nm). It allows the polymerization of various formulations (methacrylates, epoxides, vinyl ethers). A high reactive function conversion for multifunctional monomers can be achieved: e.g. 50% for a diepoxide under air, >90% for a divinylether (with a very high rate of polymerization Rp), almost 100% for an epoxide/vinyl ether blend (very high Rp) under air, and 85% for methacrylates (high Rp) in laminate (43% under air). These results are above the ones obtained with a thianthrenium salt chosen as a reference e.g. a lower epoxy conversion ∼25% and a clearly lower Rp for the diepoxide polymerization. ESR-spin trapping, laser flash photolysis, steady state photolysis and molecular orbitals calculations support the formation of Ph˙ and naphthalimide-Ph-I˙+ as well as the generation of H+, thereby explaining the photoinitiation step mechanism.
Recommended Journals

Journal of the Indian Institute of Science

Electroanalysis

Atomization and Sprays

Main Group Chemistry

Topics in Catalysis

Acta Metallurgica Sinica-English Letters

Herald of the Russian Academy of Sciences

Journal of Asian Natural Products Research

Journal of Chemical Sciences

Critical Reviews in Solid State and Materials Sciences
Related Literature
A novel type of phosphide: synthesis and X-ray crystal structure analysis of (tBu3Si)3P4Li3
Hans-Wolfram Lerner, Matthias Wagner, Michael Bolte
DOI: 10.1039/B210984K
One- and three-dimensional infinite arrays of Cu(i) ions exhibited by [Cu(NH3)2]Br and [Cu(NH3)Cl] in the solid state
Günter Margraf, Jan W. Bats, Michael Bolte, Hans-Wolfram Lerner, Matthias Wagner
DOI: 10.1039/B212517J
Cyclopentanes from N-amino-glyconolactams. A synthesis of mannostatin A
Guixian Hu, Martin Zimmermann, Chepuri Venkata Ramana, Andrea Vasella
DOI: 10.1039/B301213A
Amidinyl radicals: new and useful intermediates for the synthesis of imidazolines and imidazoles
Dominique Gennet, Samir Z. Zard, Haiwen Zhang
DOI: 10.1039/B304545E
Total synthesis of (±)-dihydrospiniferin-1 via a polyfluoro alkanosulfonyl fluoride induced tandem carbonium ion rearrangement reaction
Ling Chen, Kai Ding, Wei-Sheng Tian
DOI: 10.1039/B300016H
Stereoselective formation of dinuclear complexes with anomalous CD spectra
Shane G. Telfer, Tomohiro Sato
DOI: 10.1039/B301267K
Synthesis of protein–nucleic acid conjugates by expressed protein ligation
Marina Lovrinovic, Ralf Seidel, Hendrik Schroeder, Oliver Seitz, Martin Engelhard, Roger S. Goody, Christof M. Niemeyer
DOI: 10.1039/B212294D
Diastereoselective formation of a dipalladium(i) complex supported by a bridging tetradentate ligand, and oxidative addition of RS–H across a phosphine-bridged PdI–PdI bond
S. Jo Ling Foo, Nathan D. Jones, Brian O. Patrick, Brian R. James
DOI: 10.1039/B300177F
Pentapyrrolic calix[4]pyrrole
Colin N. Warriner, Philip A. Gale, Mark E. Light, Michael B. Hursthouse
DOI: 10.1039/B303959E
Silicon, germanium, tin and lead analogues of acetylenes
DOI: 10.1039/B212224C
You might also like
What precautions should be taken when handling 2-Methyl-2-propanyl 5-amino-2-thiophenecarboxylate (CAS: 1498311-57-1)?
When handling 2-Methyl-2-propanyl 5-amino-2-thiophenecarboxylate (CAS: 1498311-5...
What are the physical and chemical properties of 5-Bromo-1,2-dichloro-3-fluorobenzene (CAS: 1000572-93-9)?
5-Bromo-1,2-dichloro-3-fluorobenzene (CAS: 1000572-93-9) is a crystalline solid ...
How should (2R)-2-Amino-2-(4-bromophenyl)ethanol (CAS: 354153-64-3) be stored?
(2R)-2-Amino-2-(4-bromophenyl)ethanol (CAS: 354153-64-3) should be stored in a c...
What regulatory guidelines apply to Methyl 4-(aminomethyl)tetrahydro-2H-pyran-4-carboxylate hydrochloride (CAS: 362707-24-2)?
Methyl 4-(aminomethyl)tetrahydro-2H-pyran-4-carboxylate hydrochloride (CAS: 3627...
What are the main uses of 1,4-dimethyl-1H-pyrazole-5-sulfonyl chloride (CAS: 1174834-52-6)?
1,4-Dimethyl-1H-pyrazole-5-sulfonyl chloride is primarily used as an intermediat...
Is Dinaphtho[1,2-b:2',1'-d]furan (CAS: 239-69-0) safe?
Dinaphtho[1,2-b:2',1'-d]furan is generally safe when handled with appropriate pe...
What is the market or research trend for 7-Methyl-7,9-dihydro-1H-purine-2,6,8(3H)-trione (CAS: 612-37-3)?
The market for 7-Methyl-7,9-dihydro-1H-purine-2,6,8(3H)-trione (CAS: 612-37-3) i...
What are the physical and chemical properties of 2-(4-Chlorophenyl)malonaldehyde (CAS: 205676-17-1)?
2-(4-Chlorophenyl)malonaldehyde (CAS: 205676-17-1) is a colorless or light yello...
How is 2-Methylchrysene (CAS: 3351-32-4) typically synthesized?
2-Methylchrysene (CAS: 3351-32-4) is typically synthesized via the reaction of c...
Is N-(6-aminopyrimidin-4-yl)acetamide (CAS: 89533-23-3) safe?
N-(6-aminopyrimidin-4-yl)acetamide (CAS: 89533-23-3) is generally considered saf...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.

![3-[7-Amino-3-(3-pyridinyl)pyrazolo[1,5-a]pyrimidin-6-yl]phenol structure 3-[7-Amino-3-(3-pyridinyl)pyrazolo[1,5-a]pyrimidin-6-yl]phenol structure](https://static.chemtradehub.com/structs/861/861249-77-6-025b.webp)


