The role of nitrogen and sulfur dual coordination of cobalt in Co-N4−xSx/C single atom catalysts in the oxygen reduction reaction
Literature Information
Asnake Sahele Haile, Heine Anton Hansen, Weldegebriel Yohannes, Yedilfana Setarge Mekonnen
Single-atom catalysts (SACs) have been considered as a potential candidate for fuel cell application due to the fact that they exhibit good oxygen reduction reaction (ORR) activity. In this study, the ORR catalytic activities of Co-N4/C, Co-N3S/C, Co-N2S2/C, Co-NS3/C, and Co-S4/C catalysts are studied using density functional theory (DFT) calculations based on the BEEF-vdW functional. The reduction of *OH into H2O is found to be the potential determining step of the ORR on Co-N4/C catalysts. This implies that the activity of the Co-N4/C system could be improved by weakening the binding energy of the *OH intermediate. The DFT results revealed that the adsorption energy of the *OH intermediate bound on Co-N3S/C, Co-N2S2/C, Co-NS3/C, and Co-S4/C is weaker than that on the Co-N4/C catalyst. The results show that the overpotentials of Co-N4/C, Co-N3S/C, Co-N2S2/C, Co-N3S/C, and Co-S4/C catalysts are 0.57, 0.37, 0.41, 0.40, and 0.47 V, respectively. Thus, the Co-N3S/C catalyst revealed a lower overpotential pathway. A slightly smaller number of charges are transferred from the Co atom in Co-N3S/C to ORR intermediates as compared to Co-N4/C and the d-band center of the Co atom changes from −0.71 eV (Co-N4/C) to −0.91 eV (Co-N3S/C). This can explain the weaker adsorption energy of *OH on the Co-N3S/C catalyst. Therefore, Co-N3S/C is a promising non-precious single-atom catalyst for efficient ORR activity in acidic solutions in fuel cells.
Related Literature
Reaction mechanism of the ethynylation of formaldehyde on copper terminated Cu2O(100) surfaces: a DFT study
DOI: 10.1039/D3CP03903J
Unraveling the effect of particle size of active metals in Ni/MgO on methane activation and carbon growth mechanism
Shengzhuo Chen, Juntian Niu, Xianrong Zheng, Haiyu Liu, Yan Jin, Jingyu Ran
DOI: 10.1039/D3CP05435G
The controlled engineering of surface oxygen defects on Bi2Zr2O7 compounds for catalytic soot combustion by adjusting the preparation methods
Shijing Zhang, Xiaohui Feng, Zekai Xu, Yuting Li, Ping Wang, Jiating Shen, Junwei Xu, Xianglan Xu, Xiuzhong Fang, Xiang Wang
DOI: 10.1039/D3CP04104B
Theoretical investigation on the ligands constructed from phenanthroline and five-membered N-heterocyclic rings for bonding and separation properties of Am(iii) and Eu(iii)
Shouqiang Wu, An Yong Li
DOI: 10.1039/D3CP05101C
Effect of the charge rate on the mechanical response of composite graphite electrodes: in situ experiment and mathematical analysis
Hainan Jiang, Yaolong He, Xiaolin Li, Zhiyao Jin, Huijie Yu, Dawei Li
DOI: 10.1039/D3CP04274J
Exploiting the photophysical features of DMAN template in ITQ-51 zeotype in the search for FRET energy transfer
Ainhoa Oliden-Sánchez, Rebeca Sola-Llano, Joaquín Pérez-Pariente, Luis Gómez-Hortigüela, Virginia Martínez-Martínez
DOI: 10.1039/D3CP02625F
An efficient particulate photocatalyst for overall water splitting based on scandium and magnesium co-doped strontium titanate
Riku Okamoto, Akira Kimura, Yuhi Nakayasu, Akira Yamakata, Ryota Tomizawa, Taizo Masuda, Koichiro Nakatani
DOI: 10.1039/D3SE01408H
A study on the Si1−xGex gradual buffer layer of III–V/Si multi-junction solar cells based on first-principles calculations
Qian Wang, Yu Zhuang, Abuduwayiti Aierken, Qiaogang Song, Qin Zhang, Youbo Dou, Qiuli Zhang, Shuyi Zhang
DOI: 10.1039/D3CP05309A
Switchable asymmetric transmission with broadband polarization conversion in vanadium dioxide-assisted terahertz metamaterials
Zhichao Liu, Tianle Zhou, Gui Jin, Jiangbin Su, Bin Tang
DOI: 10.1039/D3CP05095E
You might also like
How should waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3) be handled?
Waste containing N-Methoxy-N-methyl-1,3-thiazole-5-carboxamide (CAS: 898825-89-3...
How should N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine (CAS: 1318338-47-4) be stored?
N-(4-Biphenylyl)dibenzo[b,d]furan-4-amine should be stored in a tightly sealed c...
What is the market or research trend for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1)?
The market for 3-Acetamido-5-amino-2,4,6-triiodobenzoic acid (CAS: 1713-07-1) is...
How should Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) be stored?
Benzyl 2-O-acetyl-3,4,6-tri-O-benzyl-beta-D-galactopyranoside (CAS: 61820-03-9) ...
What regulatory guidelines apply to 2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3)?
2-Ethylpiperazine dihydrochloride (CAS: 438050-52-3) is regulated under the Glob...
What regulatory guidelines apply to 1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 119462-56-5)?
1,1'-[1,3-Phenylenebis(methylene)]bis(3-methyl-1H-pyrrole-2,5-dione) (CAS: 11946...
Are there alternatives to 5-Fluoro-2-(1-pyrrolidinyl)pyridine (CAS: 1287217-79-1) in synthesis?
Several alternatives can be used in the synthesis of 5-Fluoro-2-(1-pyrrolidinyl)...
What precautions should be taken when handling 1-((2R,3R,4R,5R)-5-((bis(4-methoxyphenyl)(phenyl)methoxy)methyl)-4-hydroxy-3-methoxytetrahydrofuran-2-yl)-5-methylpyrimidine-2,4(1H,3H)-dione (CAS: 153631-19-7)?
Proper personal protective equipment (PPE) must be worn when handling this compo...
What precautions should be taken when handling 6-Bromoimidazo[1,2-a]pyridin-8-amine (CAS: 676371-00-9)?
When handling 6-Bromoimidazo[1,2-a]pyridin-8-amine, it is important to wear appr...
Are there alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochloride (CAS: 1049740-22-8) in synthesis?
Alternatives to (2S,4R)-4-(4-Nitrobenzyl)pyrrolidine-2-carboxylic acid hydrochlo...















![2-Methyl-2-propanyl {3-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-3-oxetanyl}carbamate structure 2-Methyl-2-propanyl {3-[4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-3-oxetanyl}carbamate structure](https://static.chemtradehub.com/structs/127/1279090-25-3-1b84.webp)