Effects of melt aging and off-stoichiometric melts on CsSrI3:Eu2+ single crystal scintillators
Literature Information
Merry Koschan
Ternary halide scintillators are commonly prepared from a mixture of commercially available binary halides. The initial binary halides may contain excess halogen ions or have different volatilities, which could lead to loss of stoichiometry of the resulting ternary halide crystals and potentially negatively affect optical and scintillation properties. In this work, the effects of vacuum aging of the melt (melt aging) and use of off-stoichiometric melts via introduction of excess CsI on the crystal quality and scintillation properties of CsSrI3:Eu2+, a promising scintillator for gamma-ray detection applications, are investigated. The phase purity of the grown samples was confirmed by powder X-ray diffraction and differential scanning calorimeter measurements, and the existence of matrix composition variations is revealed by energy-dispersive X-ray spectroscopy analyses. An abnormal relationship between the full energy peak and the shaping time, i.e. full energy peak broadening or existence of two full energy peaks, in the melt-aged and off-stoichiometric samples is observed. It is ascribed to a slow scintillation decay event in a time scale between 15 and 50 μs. For the CsSrI3:Eu2+ single crystal grown from a stoichiometric melt without melt aging treatment, an energy resolution of 5.0% at 662 keV and a light yield of 48 000 ± 2000 photons per MeV can be achieved at a size of 1.4 cm3.
Related Literature
A versatile macro-initiator with dual functional anchoring groups for surface-initiated atom transfer radical polymerization on various substrates
Xiaolong Wang, Feng Zhou
DOI: 10.1039/C2PY20148H
Molecular imaging with polymers
Nathan R. B. Boase, Idriss Blakey, Kristofer J. Thurecht
DOI: 10.1039/C2PY20132A
Synthesis and polymerization of C-vinyl- and N-vinyl-1,2,3-triazoles
Samir Beghdadi, Daniele Addis, Hatem Ben Romdhane, Julien Bernard, Eric Drockenmuller
DOI: 10.1039/C1PY00446H
Benzoxazine-based phosphinated bisphenols and their application in preparing flame-retardant, low dielectric cyanate ester thermosets
Hou Chien Chang, Hung Tse Lin, Ching Hsuan Lin
DOI: 10.1039/C2PY00528J
Molecular design, synthesis and characterization of aromatic polythioester and polydithioester
Daisuke Abe, Yuji Sasanuma
DOI: 10.1039/C2PY20118F
Synthesis of cyclic amphiphilic homopolymers and their potential application as polymeric micelles
Boyd A. Laurent, Scott M. Grayson
DOI: 10.1039/C1PY00378J
Synthesis by nitroxide-mediated aqueous dispersion polymerization, characterization, and physical core-crosslinking of pH- and thermoresponsive dynamic diblock copolymer micelles
Guillaume Delaittre, Maud Save, Marianne Gaborieau, Patrice Castignolles, Jutta Rieger, Bernadette Charleux
DOI: 10.1039/C2PY20084H
You might also like
Are there alternatives to 1-(4-Chlorophenyl)-N-hydroxymethanimine (CAS: 3848-36-0) in synthesis?
When considering alternatives to 1-(4-Chlorophenyl)-N-hydroxymethanimine (CAS: 3...
How should (1R,9S,10S,12S,14E,16S,19R,20R,21S,22R)-3,9,21-Trihydroxy-5,10,12,14,16,20,22-heptamethyl-23,24-dioxatetracyclo[17.3.1.1~6,9~.0~2,7~]tetracosa-2,5,7,14-tetraen-4-one (CAS: 183202-73-5) be stored?
This compound should be stored in a cool, dry place away from direct sunlight. I...
How is 3-(4-Bromophenyl)-5-(2-fluorophenyl)-1,2,4-oxadiazole (CAS: 419553-16-5) typically synthesized?
3-(4-Bromophenyl)-5-(2-fluorophenyl)-1,2,4-oxadiazole is synthesized through a m...
How is 5-Chloro-2-(4-chlorophenyl)-4-methyl-6-[3-(1-piperidinyl)propoxy]pyrimidine (CAS: 1639220-19-1) typically synthesized?
5-Chloro-2-(4-chlorophenyl)-4-methyl-6-[3-(1-piperidinyl)propoxy]pyrimidine (CAS...
What industries use 2-Chloro-4-(difluoromethoxy)pyridine (CAS: 1206978-15-5)?
2-Chloro-4-(difluoromethoxy)pyridine is used in the pharmaceutical industry for ...
What regulatory guidelines apply to 3-Chloro-6-methylpyridazine (CAS: 1121-79-5)?
3-Chloro-6-methylpyridazine (CAS: 1121-79-5) is classified under the Globally Ha...
Are there alternatives to Methyl 4,5-dimethyl-2-nitrobenzoate in synthesis?
Several alternatives can be used in the synthesis of Methyl 4,5-dimethyl-2-nitro...
Are there alternatives to (2E,2'E)-3,3'-(1,4-Phenylene)bisacrylaldehyde in synthesis?
Alternatives to (2E,2'E)-3,3'-(1,4-Phenylene)bisacrylaldehyde include other acry...
What is 3-Amino-5-chloropyridin-2-ol hydrochloride (CAS: 1261906-29-9)?
3-Amino-5-chloropyridin-2-ol hydrochloride is an organic compound with the CAS n...
What precautions should be taken when handling 6,7-Difluoro-2,3-dihydro-4H-chromen-4-one (CAS: 1092349-93-3)?
When handling 6,7-Difluoro-2,3-dihydro-4H-chromen-4-one, it is essential to wear...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.














