A dual-mode signaling response of a AuNP-fluorescein based probe for specific detection of thiourea
Literature Information
Jian Sun, Xiurong Yang
By employing fluorescein and AuNPs as energy donors and acceptors, respectively, a novel fluorescence resonance energy transfer (FRET)-based dual-mode sensor for selective recognition and quantitative detection of thiourea was designed and constructed in this study for the first time. Herein, it is demonstrated that fluorescein could be adsorbed on the surface of AuNPs and induce fluorescence quenching through the well-known FRET process. The preferential introduction of thiourea would reduce the overall surface negative charges of AuNPs by replacing the original citrate groups, leading to the aggregation of AuNPs. Meanwhile, thiourea could prevent the binding between fluorescein and AuNPs, reduce the as-formed FRET effect, and then lead to fluorescence recovery of the fluorescein. Therefore, a dual-mode sensor with AuNP-related colorimetric and fluorescein-based fluorescence readout was rationally developed. Under the optimum conditions, the detection limits were calculated to be 10 nM and 23 nM for fluorescent and colorimetric sensors, individually, and a limit of 0.4 μM was detected by the naked eye. Finally, such a simple, convenient, cost-effective, highly selective and sensitive sensing assay was successfully applied in the detection of thiourea in tap water and fruit juice samples.
Recommended Journals

Environmental Toxicology and Pharmacology

Journal of Medical Biochemistry

Photochemical & Photobiological Sciences

Angewandte Chemie International Edition

Lab on a Chip

Nature Reviews Drug Discovery

Physical Chemistry Chemical Physics

Foundations of Chemistry

European Journal of Organic Chemistry

Contact Lens & Anterior Eye
Related Literature
Coarse-grained molecular dynamics simulation of the interface behaviour and self-assembly of CTAB cationic surfactants
Sílvia Illa-Tuset, David C. Malaspina, Jordi Faraudo
DOI: 10.1039/C8CP04505D
A computational study on the electrified Pt(111) surface by the cluster model
DOI: 10.1039/C8CP07241H
Thermophysical properties of glyceline–water mixtures investigated by molecular modelling
Jörg Baz, Christoph Held, Jürgen Pleiss, Niels Hansen
DOI: 10.1039/C9CP00036D
Unveiling the multifunctional roles of hitherto known capping ligand oleic acid as blue emitter and sensitizer in tuning the emission colour to white in red-emitting phosphors
S. Sekar, J. George Muller
DOI: 10.1039/C8CP02954G
Interface Schottky barrier in Hf2NT2/MSSe (T = F, O, OH; M = Mo, W) heterostructures
Tao Jing, Dongmei Liang, Jinxin Hao, Mingsen Deng, Shaohong Cai
DOI: 10.1039/C9CP00028C
Dynamic micellar oligomers of amyloid beta peptides play a crucial role in their aggregation mechanisms
Bertrand Morel, Maria Paz Carrasco, Samuel Jurado, Carmen Marco, Francisco Conejero-Lara
DOI: 10.1039/C8CP02685H
Transition metal-containing molecular devices: controllable single-spin negative differential thermoelectric resistance effects under gate voltages
Xifeng Yang, Fangxin Tan, Yaojun Dong, Hailin Yu, Yushen Liu
DOI: 10.1039/C8CP07049K
Asymmetric abstraction of two chemically-equivalent methylene hydrogens: significant enantioselectivity of endoperoxide presented by fumitremorgin B endoperoxidase
Jian-Nan Ji, Shi-Lu Chen
DOI: 10.1039/C8CP05637D
Role of suppressed oxygen vacancies in the BiFeO3 nanofiller to improve the polar phase and multifunctional performance of poly(vinylidene fluoride)
Abhishek Sasmal, Shrabanee Sen, P. Sujatha Devi
DOI: 10.1039/C8CP07281G
You might also like
What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?
When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...
What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?
When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...
How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?
Waste containing this compound (CAS: 62921-74-8) should be handled according to ...
How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?
Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...
How is 5-({4-[(2S,4R)-4-Hydroxy-2-methyltetrahydro-2H-pyran-4-yl]-2-thienyl}sulfanyl)-1-methyl-1,3-dihydro-2H-indol-2-one (CAS: 166882-70-8) typically synthesized?
This compound can be synthesized using a multi-step process involving the conjug...
Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?
There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...
How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?
Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...
How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?
Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...
How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?
Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...
How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?
5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...
Source Journal
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.
![4-Chloro-3-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridine structure 4-Chloro-3-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridine structure](https://static.chemtradehub.com/structs/869/869335-75-1-a9d0.webp)



