How does a tiny terminal alkynyl end group drive fully hydrophilic homopolymers to self-assemble into multicompartment vesicles and flower-like complex particles?
Literature Information
Tingting Liu, Wei Tian, Yunqing Zhu, Yang Bai, Hongxia Yan, Jianzhong Du
It is a theoretical and technical challenge to construct well-defined nanostructures such as vesicles from fully hydrophilic homopolymers in pure water. In this paper, we incorporate one terminal alkynyl group into a fully hydrophilic linear or non-linear homopolymer to drive its unusual self-assembly in aqueous solution to form multicompartment vesicles, spherical compound micelles, flower-like complex particles, etc., which have been confirmed by transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic/static light scattering (DLS/SLS) and drug encapsulation experiments. The formation of poly(N-isopropyl acrylamide) (NIPAM) and poly[oligo(ethylene glycol) methacrylate] (POEGMA475) self-assemblies is mainly determined by the terminal alkynyl group itself (typically 1–3 wt%) while it is independent of other factors such as traditional hydrophobic–hydrophilic balance. Moreover, upon increasing the chain length of PNIPAM homopolymers, multicompartment vesicles, spherical micelles, and large flower-like complex particles can be obtained during the self-assembly process. In contrast, smaller micelles were formed when the kind of terminal alkynyl group attached to the PNIPAM chain was changed from a propargyl isobutyrate group to a (di)propargyl 2-methylpropionamide group. Particularly, a long chain hyperbranched structure with lots of terminal alkynyl groups induces the formation of vesicles. Also, the encapsulation experiment of doxorubicin hydrochloride was employed to further distinguish vesicular and micellar nanostructures. Additionally, the terminal alkynyl group-driven self-assembly has been applied to hydrophilic POEGMA475 homopolymers to afford similar nanostructures to PNIPAM homopolymers such as multicompartment vesicles and spherical compound micelles. Our study has opened up a new way to prepare hydrophilic homopolymer self-assemblies with tunable morphology.
Recommended Journals
Related Literature
Modulating CsPbBr3 nanocrystals encapsulated in PCN-224(Zr) for boosting full-spectrum-driven CO2 reduction: S-scheme transfer, photothermal-synergistic effect, and DFT calculations
Yan-He Chen, Jin-Qiu Shen, Xiao-Lu Chen, Luobing Tang, Na Zhang, Jian-Yong Zhang, Zhen-Jiang Liu
DOI: 10.1039/D3SE01029E
Photoelectrochemical conversion of glycerol aqueous solution to value-added chemicals using Bi2Fe4O9 as a photoanode
Bruno L. da Silva, Saulo A. Carminati, Matheus B. C. Souza, Leonardo C. Soares, Claudia Longo, Pablo S. Fernández, Ana F. Nogueira
DOI: 10.1039/D3SE01045G
Two-dimensional SPdAZ2 (A = Si, Ge; Z = N, P, As) monolayers with an intrinsic electric field for high-performance photocatalysis
Zhen Gao, Yao He, Kai Xiong
DOI: 10.1039/D3CP04936A
Solution-grown millimeter-scale Mn-doped CsPbBr3/Cs4PbBr6 crystals with enhanced photoluminescence and stability for light-emitting applications
Wenfang Peng, Rongrong Hu, Bobo Yang, Qiaoyun Wu, Pan Liang, Lin Cheng, Xixi Cheng, Yuefeng Li, Jun Zou
DOI: 10.1039/D3CP04371A
UV-spectrum and photodecomposition of peroxynitrous acid in the troposphere
Najoua Derbel, Alexander Alijah, Thibaud Cours
DOI: 10.1039/D3CP04580C
Enhanced syngas selectivity and carbon utilization during chemical looping reforming of methane via a non-steady redox cycling strategy
Caroline M. Hill, Simon Ackermann, Kathryn G. Trimm, Dylan C. McCord, Philipp Furler, Jonathan R. Scheffe
DOI: 10.1039/D3SE01213A
Syngas conversion to biofuels and biochemicals: a review of process engineering and mechanisms
Sundus Javed
DOI: 10.1039/D3SE00916E
Revealing the evolution of local structures in the formation process of alkaline earth metal cation-containing zeolites from glasses
Makiko Deguchi, Kentaro Kobayashi, Sohei Sukenaga, Mariko Ando, Hiroyuki Shibata, Akihiko Machida, Yutaka Yanaba, Tatsuya Okubo
DOI: 10.1039/D3CP04954J
Optimization and kinetics of crown ether-based hydroxyl-rich organic polymers for sustainable CO2 fixation and iodine vapor adsorption
Ningning Li, Yuhang Zhang, Xuanbo Liu, Xionglei Wang, Zheng Zhu, Balaji Panchal, Shenjun Qin
DOI: 10.1039/D3SE01298K
You might also like
What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?
Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...
How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?
Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...
How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?
Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...
What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?
When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...
What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?
Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...
Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?
Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...
How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?
Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...
What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?
1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...
Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?
There are alternative reagents and compounds that can be used in the synthesis o...
What is Tungsten(IV) oxide (CAS: 12036-22-5)?
Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.














![1-(Hexopyranosyloxy)-4a,5-dihydroxy-7-methyl-1,4a,5,6,7,7a-hexahydrocyclopenta[c]pyran-7-yl 3-phenylacrylate structure 1-(Hexopyranosyloxy)-4a,5-dihydroxy-7-methyl-1,4a,5,6,7,7a-hexahydrocyclopenta[c]pyran-7-yl 3-phenylacrylate structure](https://static.chemtradehub.com/structs/192/19210-12-9-ecae.webp)