Complex refractive indices in the near-ultraviolet spectral region of biogenic secondary organic aerosol aged with ammonia

Literature Information

Publication Date 2014-04-10
DOI 10.1039/C4CP01009D
Impact Factor 3.676
Authors

J. M. Flores, G. Adler, H. J. Lee, L. Segev, J. Laskin, A. Laskin, S. A. Nizkorodov, S. S. Brown, Y. Rudich


View Original

Abstract

Atmospheric absorption by brown carbon aerosol may play an important role in global radiative forcing. Brown carbon arises from both primary and secondary sources, but the mechanisms and reactions of the latter are highly uncertain. One proposed mechanism is the reaction of ammonia or amino acids with carbonyl products in secondary organic aerosol (SOA). We generated SOA in situ by reacting biogenic alkenes (α-pinene, limonene, and α-humulene) with excess ozone, humidifying the resulting aerosol, and reacting the humidified aerosol with gaseous ammonia. We determined the complex refractive indices (RI) in the 360–420 nm range for these aerosols using broadband cavity enhanced spectroscopy (BBCES). The average real part (n) of the measured spectral range of the NH3-aged α-pinene SOA increased from n = 1.50 (±0.01) for the unreacted SOA to n = 1.57 (±0.01) after 1.5 h of exposure to 1.9 ppm NH3, whereas the imaginary component (k) remained below . For the limonene and α-humulene SOA the real part did not change significantly, and we observed a small change in the imaginary component of the RI. The imaginary component increased from k = 0.000 to an average k = 0.029 (±0.021) for α-humulene SOA, and from to an average k = 0.032 (±0.019) for limonene SOA after 1.5 h of exposure to 1.3 and 1.9 ppm of NH3, respectively. Collected filter samples of the aged and unreacted α-pinene SOA and limonene SOA were analyzed off-line by nanospray desorption electrospray ionization high resolution mass spectrometry (nano-DESI/HR-MS), and in situ using a Time-of-Flight Aerosol Mass Spectrometer (ToF-AMS), confirming that the SOA reacted and that various nitrogen-containing reaction products formed. If we assume that NH3 aging reactions scale linearly with time and concentration, which will not necessarily be the case in the atmosphere, then a 1.5 h reaction with 1 ppm NH3 in the laboratory is equivalent to 24 h reaction with 63 ppbv NH3, indicating that the observed aerosol absorption will be limited to atmospheric regions with high NH3 concentrations.

Related Literature

A persistent luminescence microsphere-based probe for convenient imaging analysis of dopamine

Jie Tang, Yingying Su, Dongyan Deng, Lichun Zhang, Na Yang, Yi Lv

2016-06-14 Paper

DOI: 10.1039/C6AN00882H

Inside front cover

Cover

DOI: 10.1039/C6AN90072K

Back cover

Cover

DOI: 10.1039/C6AN90070D

Back cover

Cover

DOI: 10.1039/C6AN90082H

Changes in the volume phase transition temperature of hydrogels for detection of the DNA hybridization process

Klaudia Kaniewska, Agata Kowalczyk, Marcin Karbarz, Anna M. Nowicka

2016-07-29 Paper

DOI: 10.1039/C6AN00523C

Dyneon THV, a fluorinated thermoplastic as a novel material for microchip capillary electrophoresis

Nacéra Aboud, Davide Ferraro, Myriam Taverna, Stéphanie Descroix, Claire Smadja, N. Thuy Tran

2016-07-25 Paper

DOI: 10.1039/C6AN00821F

iHEART: a miniaturized near-infrared in-line gas sensor using heart-shaped substrate-integrated hollow waveguides

Rafael L. Ribessi, Thiago de A. Neves, Jarbas J. R. Rohwedder, Celio Pasquini, Ivo M. Raimundo, Jr., Andreas Wilk, Vjekoslav Kokoric, Boris Mizaikoff

2016-08-01 Paper

DOI: 10.1039/C6AN01027J

You might also like

Compound Q&A

What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?

When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...

71193-32-32-Chloro-1,2-bis(4-m...
Compound Q&A

What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?

4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...

224789-26-84-Ethoxy-3-(5-methyl...
Compound Q&A

How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?

Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...

2681-55-2Methyl 3-Oxo-4-Andro...
Compound Q&A

What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?

(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...

909725-61-7(R)-3-Amino-4-(3-hex...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?

2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...

1254120-14-32-Methyl-2-propanyl ...
Compound Q&A

Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?

There are alternative reagents that can be used in synthesis instead of (E)-4-(t...

135355-96-3(E)-4-(tert-Butoxy)-...
Compound Q&A

What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?

[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...

121202-20-8[2-(3-Chlorophenyl)-...
166249-17-8Methyl (2S)-[(4S)-2,...
Compound Q&A

What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?

The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...

42865-19-01-Bromo-2-isocyanato...
Compound Q&A

What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?

4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...

147065-06-34-Nitro-D-phenylalan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.