Role of three-body recombination for charge reduction in MALDI process

Literature Information

Publication Date 2013-03-05
DOI 10.1039/C3AN36749E
Impact Factor 4.616
Authors

Yiming Lin, Zhibin Yin, Xiaohua Wang, Weifeng Li, Wei Hang


View Original

Abstract

Ions in Matrix-Assisted Laser Desorption/Ionization (MALDI) are predominantly singly charged for small analyte molecules. With the estimated high number density and low temperature of electrons, the three-body recombination mechanism is attractive and should be considered as an important cause for the charge reduction in the plume. Theoretical calculations indicate that the rate coefficient of the three-body recombination is about 50 times higher than that of the two-body recombination if the analyte molecule has insufficient degrees of freedom. Experimental results show that, for small analyte molecules, the ratio of AH22+/AH+ is close to the theoretical 5% value from the three-body recombination modeling and this ratio declines with the increasing electron and matrix molecule number density caused by greater laser irradiance. The ratio of [A + 2]+/[A + 1]+ is higher than the theoretical isotopic value, and the excess [A + 2]+ could exclusively result from the three-body recombination collisions. Further evidence demonstrates that [A + 2]+/[A + 1]+ increases with electron number density, which is in correspondence with the model. All of these theoretical and experimental results indicate that three-body recombination is an essential charge reduction mechanism for small molecules in the MALDI plume.

Related Literature

Contents list

2024-01-30 Front/Back Matter

DOI: 10.1039/D4TA90024C

Rational design of ZIF-derived nanocarbon with dual metal active sites via molten salt strategy for advancing oxygen electrocatalysis

Sakshi Bhardwaj, Tribani Boruah, Ramendra Sundar Dey

2023-10-27 Research Article

DOI: 10.1039/D3QI01700A

Towards a large-scale and high-performance smart window based on Prussian blue: a revolutionary two-dimensional-material assisted in situ growth preparation method utilizing MXene

Maofei Tian, Mengshan Lu, Wenjun Wu, Yanbang Tang, Zhongquan Wan, Junsheng Luo, Chunyang Jia

2023-12-14 Paper

DOI: 10.1039/D3TA06768H

“Three in one” 3D mixed skeleton design enables dendrite-free Li metal batteries

Wan-Yue Diao, Dan Xie, Ying-Yu Wang, Fang-Yu Tao, Chang Liu, Wen-Liang Li, Jing-Ping Zhang

2023-12-20 Research Article

DOI: 10.1039/D3QI02243A

Phase dependence and mechanical and thermal ductility of the luminescence properties of tetranuclear Cu(i) metallacycle assemblies stabilized by ditopic organo-pnictogen (P,As) ligands

Constance Lecourt, Raquel Utrera Melero, Florent Moutier, Vincent Dorcet, Guillaume Calvez, Corentin Poidevin, Karine Costuas, Manfred Scheer, Christophe Lescop

2023-09-19 Research Article

DOI: 10.1039/D3QI01544K

Crystalline phase transition in as-synthesized pure silica zeolite RTH containing tetra-alkyl phosphonium as organic structure directing agent

Joaquin Martinez-Ortigosa, Reisel Millán, Jorge Simancas, Manuel Hernández-Rodríguez, J. Alejandro Vidal-Moya, Jose L. Jordá, Vincent Sarou-Kanian, Mercedes Boronat, Teresa Blasco, Fernando Rey

2023-11-24 Paper

DOI: 10.1039/D3TA06071C

Descriptors for phase prediction of high entropy alloys using interpretable machine learning

Shang Zhao, Weijie Liao, Yatong Zhao, Jun Wang, Jinshan Li, Turab Lookman

2023-12-28 Paper

DOI: 10.1039/D3TA06402F

Front cover

2024-01-03 Cover

DOI: 10.1039/D4JA90001D

Strategies to enhance figures of merit in ICP-ToF-MS

T. E. Lockwood, R. Gonzalez de Vega, Z. Du, L. Schlatt, X. Xu, D. Clases

2023-11-30 Paper

DOI: 10.1039/D3JA00288H

Liquid polybutadiene reinforced inverse vulcanised polymers

Veronica Hanna, Michael Graysmark, Helen Willcock, Tom Hasell

2023-12-12 Paper

DOI: 10.1039/D3TA05470E

You might also like

Compound Q&A

What precautions should be taken when handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2)?

When handling lithium chloride hydrate (1:1:1) (CAS: 16712-20-2), it is importan...

16712-20-2Lithium chloride hyd...
Compound Q&A

Is 4-(4H-1,2,4-Triazol-4-yl)piperidine (CAS: 690261-92-8) safe?

4-(4H-1,2,4-Triazol-4-yl)piperidine is generally considered safe for use in phar...

690261-92-84-(4H-1,2,4-Triazol-...
Compound Q&A

How should waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) be handled?

Waste containing 1,3-Thiazole-2-carboxamide (CAS: 16733-85-0) should be collecte...

16733-85-01,3-Thiazole-2-carbo...
Compound Q&A

What regulatory guidelines apply to 5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3)?

5-(Difluoromethyl)-2-fluorobenzonitrile (CAS: 934175-58-3) is subject to regulat...

934175-58-35-(Difluoromethyl)-2...
Compound Q&A

How is Methyl 3-acetamido-2-thiophenecarboxylate (CAS: 22288-79-5) typically synthesized?

Methyl 3-acetamido-2-thiophenecarboxylate can be synthesized by the reaction of ...

22288-79-5Methyl 3-acetamido-2...
Compound Q&A

What is 4-Isoquinolinecarbonitrile (CAS: 34846-65-6)?

4-Isoquinolinecarbonitrile is a chemical compound with the CAS number 34846-65-6...

34846-65-64-Isoquinolinecarbon...
Compound Q&A

How should Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) be stored?

Store Methyl 1H-1,2,3-triazole-4-carboxylate (CAS: 877309-59-6) in a cool, dry p...

877309-59-6Methyl 1H-1,2,3-tria...
Compound Q&A

What regulatory guidelines apply to 6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8)?

6-Bromo[1,3]thiazolo[5,4-b]pyridin-2-amine (CAS: 1160791-13-8) is subject to the...

1160791-13-86-Bromo[1,3]thiazolo...
Compound Q&A

Is (2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) safe?

(2S,3S)-2-Ammonio-3-(3,4-dihydroxyphenyl)-3-hydroxypropanoate (CAS: 23651-95-8) ...

23651-95-8(2S,3S)-2-Ammonio-3-...
Compound Q&A

What are the physical and chemical properties of 7-bromo-3-methyl-3,4-dihydroquinazolin-4-one (CAS: 1293987-84-4)?

7-Bromo-3-methyl-3,4-dihydroquinazolin-4-one is a solid with a crystalline form....

1293987-84-47-bromo-3-methyl-3,4...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.