Fluorescence studies on phenylene moieties embedded in a framework of periodic mesoporous organosilica

Literature Information

Publication Date 2011-03-24
DOI 10.1039/C0CP02714F
Impact Factor 3.676
Authors

Tadashi Okada, Yoshiharu Hirose


View Original

Abstract

The excited state characteristics of phenylene (Ph)-bridged periodic mesoporous organosilica (PMO) powders with crystal-like and amorphous wall structures are investigated. Crystal-like Ph–PMO has a molecular ordering of the bridging organic moieties with intervals of 0.76 and 0.44 nm parallel and perpendicular to the mesochannel direction, respectively, whereas amorphous Ph–PMO has no molecular-level periodicity in the wall. Fluorescence from the exciton and excimer of the Ph moieties and the defect center in the silicate network were detected at room temperature, but fluorescence from the excimer and the defect center were not detected at 77 K for crystal-like Ph–PMO dispersed in a methanol/ethanol mixed solvent. The decay curve of the exciton fluorescence of crystal-like Ph–PMO at room temperature was analyzed successfully using a one-dimensional diffusion model quenched by the defect center and the excimer site. The results were discussed in comparison with those for the crystal-like biphenylene-bridged PMO reported in the preceding paper (Yamanaka et al., Phys. Chem. Chem. Phys., 2010, 12, 11688–11696). The existence of excited states with various conformations including ground state dimers or aggregates of the Ph moieties was suggested for amorphous Ph–PMO. It was clearly apparent that the differences in the excited state dynamics reflected the differences in the molecular-level structure in the wall.

Related Literature

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs)

Tao Zhang, Zhiguang Xu, Zengxiao Cai, Qipeng Guo

2015-05-18 Paper

DOI: 10.1039/C5CP01157D

Unraveling the effect of polymer dots doping in inverted low bandgap organic solar cells

Xinyuan Zhang, Chunyu Liu, Jinfeng Li, Yeyuan He, Zhiqi Li, Hao Li, Liang Shen, Wenbin Guo, Shengping Ruan

2015-05-19 Paper

DOI: 10.1039/C5CP01722J

Reinforced photocatalytic reduction of CO2 to CO by a ternary metal oxide NiCo2O4

Zhaoyu Wang, Min Jiang, Jiani Qin, Han Zhou, Zhengxin Ding

2015-05-08 Paper

DOI: 10.1039/C5CP01997D

Interfacial thermal transport and structural preferences in carbon nanotube–polyamide-6,6 nanocomposites: how important are chemical functionalization effects?

Mohammad Reza Gharib-Zahedi, Mohsen Tafazzoli, Michael C. Böhm, Mohammad Alaghemandi

2015-04-23 Paper

DOI: 10.1039/C5CP00752F

Peculiar morphological transitions induced by nanoparticles in polymeric blends: retarded relaxation or altered interfacial tension?

Shital Patangrao Pawar, Suryasarathi Bose

2015-05-12 Perspective

DOI: 10.1039/C5CP01644D

Conjugated polymer P3HT–Au hybrid nanostructures for enhancing photocatalytic activity

Bikash Jana, Santanu Bhattacharyya, Amitava Patra

2015-05-19 Paper

DOI: 10.1039/C5CP01769F

Subsystem-DFT potential-energy curves for weakly interacting systems

Danny Schlüns, Kevin Klahr, Christian Mück-Lichtenfeld, Lucas Visscher, Johannes Neugebauer

2014-12-23 Paper

DOI: 10.1039/C4CP04936E

Hydrogen bonding and π–π interactions in imidazolium-chloride ionic liquid clusters

Richard P. Matthews, Tom Welton, Patricia A. Hunt

2015-03-18 Paper

DOI: 10.1039/C5CP00459D

You might also like

Compound Q&A

How should 2-Methylbenzene-1,4-diamine dihydrochloride (CAS: 615-45-2) be stored?

2-Methylbenzene-1,4-diamine dihydrochloride (CAS: 615-45-2) should be stored in ...

615-45-22-Methylbenzene-1,4-...
Compound Q&A

Is (1S,4S)-2,5-Diazabicyclo[2.2.1]heptane dihydrobromide (CAS: 132747-20-7) safe?

(1S,4S)-2,5-Diazabicyclo[2.2.1]heptane dihydrobromide is generally considered sa...

132747-20-7(1S,4S)-2,5-Diazabic...
Compound Q&A

What industries use (6-Chloropyridazin-3-YL)methanamine (CAS: 871826-15-2)?

(6-Chloropyridazin-3-YL)methanamine finds applications in the pharmaceutical ind...

871826-15-2(6-Chloropyridazin-3...
Compound Q&A

What are the main uses of 2-Fluoro-3-methylphenol (CAS: 77772-72-6)?

2-Fluoro-3-methylphenol is primarily used in the synthesis of pharmaceuticals, p...

77772-72-62-Fluoro-3-methylphe...
Compound Q&A

What precautions should be taken when handling 3-Methoxy-4-nitrobenzonitrile (CAS: 177476-75-4)?

When handling 3-Methoxy-4-nitrobenzonitrile, it is important to wear appropriate...

177476-75-43-Methoxy-4-nitroben...
Compound Q&A

What precautions should be taken when handling 1,3-Oxazolo[4,5-b]pyridine-2(3H)-thione (CAS: 211949-57-4)?

When handling 1,3-Oxazolo[4,5-b]pyridine-2(3H)-thione (CAS: 211949-57-4), it is ...

211949-57-4[1,3]Oxazolo[4,5-b]p...
Compound Q&A

What regulatory guidelines apply to 4-Ethynylbenzamide (CAS: 90347-86-7)?

4-Ethynylbenzamide (CAS: 90347-86-7) falls under various regulatory guidelines i...

90347-86-74-Ethynylbenzamide
Compound Q&A

What are the main uses of 3-(2-Ethylphenyl)-2-thioxo-4-imidazolidinone (CAS: 186822-57-1)?

3-(2-Ethylphenyl)-2-thioxo-4-imidazolidinone is primarily used as an intermediat...

186822-57-13-(2-Ethylphenyl)-2-...
Compound Q&A

What is (2-Fluoro-6-methoxyphenyl)acetic acid (CAS: 500912-19-6)?

(2-Fluoro-6-methoxyphenyl)acetic acid, also known as 4-fluoro-3-methoxybenzoic a...

500912-19-6(2-Fluoro-6-methoxyp...
Compound Q&A

What is the market or research trend for 2-[4-(Hydroxymethyl)phenoxy]ethanol (CAS: 102196-18-9)?

Market trends for 2-[4-(Hydroxymethyl)phenoxy]ethanol (CAS: 102196-18-9) indicat...

102196-18-92-[4-(Hydroxymethyl)...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.