Enzymes in neoteric solvents: From one-phase to multiphase systems
Literature Information
Pedro Lozano
Biphasic systems based on neoteric solvents, e.g. ionic liquids (ILs), supercritical carbon dioxide (scCO2), fluorous solvents (FSs) and liquid polymers (LPs), represent interesting alternatives to organic solvents for designing continuous clean biotransformations methods in non-aqueous environments that directly provide pure products. The classical advantages of scCO2– its ability to extract, dissolve and transport chemicals – are complemented by the high catalytic efficiency of enzymes in liquid neoteric solvents (e.g. ILs, LPs or FSs). Enzyme behaviour in scCO2 and ILs, as well as the phase behaviour of ILs/scCO2, are key parameters for carrying out integral green bioprocesses in continuous operation. Experimental approaches, reactor designs and results are discussed in this Critical review.
Recommended Journals
Related Literature
Secondary brown carbon formation via the dicarbonyl imine pathway: nitrogen heterocycle formation and synergistic effects
C. Zuth, T. Hoffmann, T. Opatz
DOI: 10.1039/C6CP03029G
Heads or tails: how do chemically substituted fullerenes melt?
DOI: 10.1039/C6CP01333C
Crystallographic origin of cycle decay of the high-voltage LiNi0.5Mn1.5O4 spinel lithium-ion battery electrode
Cheng-Zhang Lu, Chia-Erh Liu, Vanessa K. Peterson, Shih-Chieh Liao, Jin-Ming Chen
DOI: 10.1039/C6CP00947F
A computational study of the quantum transport properties of a Cu–CNT composite
Mahdi Ghorbani-Asl, Paul D. Bristowe, Krzysztof Koziol
DOI: 10.1039/C5CP01470K
Defect induced tunable near infrared emission of Er–CeO2 by heterovalent co-dopants
Mihaela Florea, Daniel Avram, Bogdan Cojocaru, Ion Tiseanu, Vasile Parvulescu, Carmen Tiseanu
DOI: 10.1039/C6CP02754G
The importance of dynamics studies on the design of sandwich structures: a CrB24 case
Lei Liu, Edison Osorio
DOI: 10.1039/C6CP02445A
Dissecting the cation–cation interaction between two uranyl units
Paweł Tecmer, Sung W. Hong, Katharina Boguslawski
DOI: 10.1039/C6CP03542F
How surface reparation prevents catalytic oxidation of carbon monoxide on atomic gold at defective magnesium oxide surfaces
Kai Töpfer, Jean Christophe Tremblay
DOI: 10.1039/C6CP02339H
Characterisation of the surface of freshly prepared precious metal catalysts
Stewart F. Parker, Devashibhai Adroja, Mónica Jiménez-Ruiz, Markus Tischer, Konrad Möbus, Stefan D. Wieland, Peter Albers
DOI: 10.1039/C6CP01027J
You might also like
What regulatory guidelines apply to 4-Amino-3-bromophenol (CAS: 74440-80-5)?
4-Amino-3-bromophenol (CAS: 74440-80-5) falls under the classification of a haza...
How should (17beta)-3-Oxoestr-4-en-17-yl acetate (CAS: 1425-10-1) be stored?
(17beta)-3-Oxoestr-4-en-17-yl acetate should be stored in a cool, dry place away...
What are the physical and chemical properties of 2-[(2,2-Diethoxyethyl)disulfanyl]-1,1-diethoxyethane (CAS: 76505-71-0)?
2-[(2,2-Diethoxyethyl)disulfanyl]-1,1-diethoxyethane (CAS: 76505-71-0) is a colo...
What is the market or research trend for 1-(β-D-ribofuranosyl)-1H-imidazo[4,5-c]pyridin-4-amine?
The market and research for 1-(β-D-ribofuranosyl)-1H-imidazo[4,5-c]pyridin-4-ami...
How should waste containing Conjugated Estrogen (CAS: 12126-59-9) be handled?
Waste containing Conjugated Estrogen (CAS: 12126-59-9) should be collected and d...
What is the market or research trend for Bis(2,2,2-trifluoroethyl) (methoxycarbonylmethyl)phosphonate?
The market for Bis(2,2,2-trifluoroethyl) (methoxycarbonylmethyl)phosphonate (CAS...
Are there alternatives to 3,4'-Di-O-methylellagic acid (CAS: 57499-59-9) in synthesis?
There are several alternatives to 3,4'-Di-O-methylellagic acid (CAS: 57499-59-9)...
What regulatory guidelines apply to 2-Chloro-N,N-dimethylpyridin-4-amine (CAS: 59047-70-0)?
2-Chloro-N,N-dimethylpyridin-4-amine (CAS: 59047-70-0) is regulated under the Gl...
What is cerium(3+);oxygen(2-);vanadium(5+) (CAS: 13597-19-8)?
Cerium(3+);oxygen(2-);vanadium(5+) (CAS: 13597-19-8) is a complex inorganic comp...
Is 7-Chloro-1-iodoisoquinoline (CAS: 1203579-27-4) safe?
7-Chloro-1-iodoisoquinoline (CAS: 1203579-27-4) is generally considered safe whe...
Source Journal
Green Chemistry

Green Chemistry provides a unique forum for the publication of innovative research on the development of alternative green and sustainable technologies. The scope of Green Chemistry is based on, but not limited to, the definition proposed by Anastas and Warner (Green Chemistry: Theory and Practice, P T Anastas and J C Warner, Oxford University Press, Oxford, 1998). Green chemistry is the utilisation of a set of principles that reduces or eliminates the use or generation of hazardous substances in the design, manufacture and application of chemical products. Green Chemistry is at the frontiers of this continuously-evolving interdisciplinary science and publishes research that attempts to reduce the environmental impact of the chemical enterprise by developing a technology base that is inherently non-toxic to living things and the environment. Submissions on all aspects of research relating to the endeavour are welcome. The journal publishes original and significant cutting-edge research that is likely to be of wide general appeal. To be published, work must present a significant advance in green chemistry. Papers must contain a comparison with existing methods and demonstrate advantages over those methods before publication can be considered. For more information please see this Editorial. Coverage includes the following, but is not limited to: Design (e.g. biomimicry, design for degradation/recycling/reduced toxicity…) Reagents & Feedstocks (e.g. renewables, CO2, solvents, auxiliary agents, waste utilization…) Synthesis (e.g. organic, inorganic, synthetic biology…) Catalysis (e.g. homogeneous, heterogeneous, enzyme, whole cell…) Process (e.g. process design, intensification, separations, recycling, efficiency…) Energy (e.g. renewable energy, fuels, photovoltaics, fuel cells, energy storage, energy carriers…) Applications (e.g. electronics, dyes, consumer products, coatings, pharmaceuticals, preservatives, building materials, chemicals for industry/agriculture/mining…) Impact (e.g. safety, metrics, LCA, sustainability, (eco)toxicology…) Green chemistry is, by definition, a continuously-evolving frontier. Therefore, the inclusion of a particular material or technology does not, of itself, guarantee that a paper is suitable for the journal. To be suitable, the novel advance should have the potential for reduced environmental impact relative to the state of the art. Green Chemistry does not normally deal with research associated with 'end-of-pipe' or remediation issues.













