Evaluation of monolithic and sub 2 µm particle packed columns for the rapid screening for illicit drugs—application to the determination of drug contamination on Irish euro banknotes
Literature Information
Jonathan Bones, Mirek Macka, Brett Paull
A study comparing recently available 100 × 3 mm id, 200 × 3 mm id monolithic reversed-phasecolumns with a 50 × 2.1 mm id, 1.8 µm particle packed reversed-phasecolumns was carried out to determine the most efficient approach (using traditional van Deemter analysis and a modern kinetic plot approach) for the rapid screening of samples for 16 illicit drugs and associated metabolites. A plot of column backpressure versusplate number (N) showed a significant advantage of using the monolithic phases, with the 20 cm monolithic column exhibiting a maximum 15 000 plates at a column backpressure of ≈70 bar, compared to ≈7000 plates at 150 bar for the 5 cm 1.8 µm particle packed column. Optimum linear velocities were found to be 0.40 mm s–1, 0.52 mm s–1 and 0.98 mm s–1 for the three above columns, respectively. The 20 cm monolithic column was subsequently applied to the separation and determination of illicit drug contamination on Irish euro banknotes, using methanol extraction followed by LC-MS/MS. Method performance data showed that the new LC-MS/MS method was significantly more sensitive than previous GC-MS/MS based methods for this application, with detection limits in the pg note–1 region, based upon a 20 µL standard injection. All of the notes examined tested positive for trace quantities of cocaine, with benzoylecgonine detected on 12 of the 45 notes sampled. Traces of heroin were also detected on three of the 45 notes.
Related Literature
Highly efficient asymmetric reduction of ketopantolactone to d-(−)-pantolactone by Escherichia coli cells expressing recombinant conjugated polyketone reductase and glucose dehydrogenase in a fed-batch biphasic reaction system
Jiapao Wang, Haoteng Zheng, Pengfei Cheng, Yifeng Wu, Anming Wang, Weike Su
DOI: 10.1039/C9RE00385A
Chiral polymeric microspheres grafted with optically active helical polymer chains: a new class of materials for chiral recognition and chirally controlled release
Ci Song, Chaohong Zhang, Fangjie Wang, Wantai Yang, Jianping Deng
DOI: 10.1039/C2PY20546G
Multitask prediction of site selectivity in aromatic C–H functionalization reactions
Thomas J. Struble, Connor W. Coley, Klavs F. Jensen
DOI: 10.1039/D0RE00071J
Optimization of the direct synthesis of dimethyl ether from CO2 rich synthesis gas: closing the loop between experimental investigations and model-based reactor design
Markus Kaiser, Karla Herrera Delgado, Stefan Wild, Jörg Sauer, Hannsjörg Freund
DOI: 10.1039/D0RE00041H
Kinetic study of esterification over structured ZSM-5-coated catalysts based on fluid flow situations in macrocellular foam materials
Xin Gao, Qiuyan Ding, Yan Wu, Yilai Jiao, Jinsong Zhang, Xingang Li, Hong Li
DOI: 10.1039/C9RE00445A
Biodegradable alanine and phenylalanine alkyl ester polyphosphazenes as potential ligament and tendon tissue scaffolds
Jessica L. Nichol, Nicole L. Morozowich, Harry R. Allcock
DOI: 10.1039/C2PY20631E
Visualization of the crucial step in SET-LRP
Martin E. Levere, Nga H. Nguyen, Xuefei Leng, Virgil Percec
DOI: 10.1039/C2PY21084C
In situ synthesis of gold nanoparticles in polymer films under concentrated sunlight: control of nanoparticle size and shape with solar flux
L. Peres, V. Goetz, M. Respaud, K. Soulantica
DOI: 10.1039/C9RE00439D
Attaching hexylbenzene and poly(9,9-dihexylfluorene) to brominated graphenevia Suzuki coupling reaction
Jie Gao, Feng Bao, Qiandong Zhu, Zhifang Tan, Tao Chen, Haohao Cai, Cheng Zhao, Qingxia Cheng, Yandan Yang, Rui Ma
DOI: 10.1039/C2PY20920A
Elementary reaction pathway study and a deduced macrokinetic model for the unified understanding of Ni-catalyzed steam methane reforming
Changming Ke, Zijing Lin
DOI: 10.1039/C9RE00460B
You might also like
What is Ethyl 3-cyclohexylpropanoate (CAS: 10094-36-7)?
Ethyl 3-cyclohexylpropanoate is a clear, colorless to light yellow liquid with a...
How should waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl)nicotinic acid (CAS: 34783-31-8) be handled?
Waste containing 2-(Hydroxymethyl)-5-(methoxycarbonyl)-6-methyl-4-(2-nitrophenyl...
How should waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) be handled?
Waste containing 2,4,6-Tris(pentafluoroethyl)-1,3,5-triazine (CAS: 858-46-8) sho...
What precautions should be taken when handling Chloroac-nle-oh (CAS: 56787-36-1)?
When handling Chloroac-nle-oh (CAS: 56787-36-1), it is essential to wear appropr...
What industries use Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 752244-05-6)?
Ethyl 6-phenylimidazo[2,1-b][1,3]thiazole-3-carboxylate is primarily used in the...
Are there alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis?
Alternatives to alpha-(2-Bromophenyl)benzylamine (CAS: 55095-15-3) in synthesis ...
How should waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) be handled?
Waste containing 2-Chloro-5-methoxypyridine (CAS: 139585-48-1) should be managed...
What industries use 1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9)?
1-(4-Methoxyphenyl)-2,5-dimethyl-1H-pyrrole (CAS: 5044-27-9) is used in various ...
Are there alternatives to 3-Bromo-5-(N-Boc)aminomethylisoxazole (CAS: 903131-45-3) in synthesis?
There are alternative reagents and compounds that can be used in the synthesis o...
What is Tungsten(IV) oxide (CAS: 12036-22-5)?
Tungsten(IV) oxide, also known as tungsten dioxide, is a chemical compound with ...
Source Journal
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.














