Direct measurement of lipid-soluble arsenic species in biological samples with HPLC-ICPMS

Literature Information

Publication Date 2005-04-18
DOI 10.1039/B502445E
Impact Factor 4.616
Authors

Ernst Schmeisser, Walter Goessler, Norbert Kienzl, Kevin A. Francesconi


View Original

Abstract

Lipid-soluble arsenicals (arsenolipids) occur in a wide range of biological samples where they may play a key role in the biosynthesis of organoarsenic compounds from inorganic arsenic. The study of these compounds has been hindered, however, by the lack of a suitable analytical technique able to separate and measure the various lipid species. As a source of arsenolipids, we used 10 crude fish oils from various regions of the world. Total arsenic analyses on the fish oils, performed with ICPMS following acid digestion with microwave-assisted heating, gave concentrations from 4.3 to 10.5 mg As kgāˆ’1. All of the arsenic was soluble in non-polar solvents such as hexane. Analysis of the fish oils for arsenolipids was performed by normal phase HPLC-ICPMS with various mixtures of organic solvents as mobile phases. Inherent problems of instability associated with the introduction of organic solvents to the plasma were overcome by the use of reduced column flow, a chilled spray chamber, and the addition of oxygen directly to the plasma. All ten fish oils appeared to contain the same 4–6 major arsenolipids, but in varying amounts depending on the origin of the fish. Further chromatography with both normal phase and reversed-phase conditions on some of the oils indicated the presence of many more minor arsenolipids. Quantification was achieved by external calibration against triphenylarsine oxide or triphenylarsine sulfide, and the sum of species following HPLC of the oils matched well the total arsenic results (92–107%). The method was applied to samples of food supplements (fish oil capsules) and a packaged food product (cod liver) whereby arsenolipids were measured and found to be significant arsenic constituents. This study represents the first attempt to directly measure intact arsenolipids and, with appropriate sample preparation, may be suitable for quantitative measurement of these arsenicals in a range of biological samples, including foodstuffs.

Related Literature

The fabrication of In2O3/In2S3/Ag nanocubes for efficient photoelectrochemical water splitting

Rui Xu, Haohua Li, Wenwen Zhang, Zepeng Yang, Guiwu Liu, Ziwei Xu, Haicheng Shao

2015-12-17 Paper

DOI: 10.1039/C5CP05833C

Probing the effects of 2D confinement on hydrogen dynamics in water and ice adsorbed in graphene oxide sponges

Giovanni Romanelli, Xuan Zhang, Kian Ping Loh, Carla Andreani

2015-10-30 Paper

DOI: 10.1039/C5CP05240H

On the formation of pyridine in the interstellar medium

Dorian S. N. Parker, Ralf I. Kaiser, Oleg Kostko, Tyler P. Troy, Musahid Ahmed, Bing-Jian Sun, Shih-Hua Chen, A. H. H. Chang

2015-11-09 Paper

DOI: 10.1039/C5CP02960K

Mixtures of the 1-ethyl-3-methylimidazolium acetate ionic liquid with different inorganic salts: insights into their interactions

Filipe S. Oliveira, Eurico J. Cabrita, Smilja Todorovic, Carlos E. S. Bernardes, Jennifer L. Hodgson, Douglas R. MacFarlane, Luís P. N. Rebelo, Isabel M. Marrucho

2015-12-21 Paper

DOI: 10.1039/C5CP06937H

Excited-state dynamics of guanosine in aqueous solution revealed by time-resolved photoelectron spectroscopy: experiment and theory

Franziska Buchner, Berit Heggen, Hans-Hermann Ritze, Walter Thiel, Andrea Lübcke

2015-11-09 Paper

DOI: 10.1039/C5CP04394H

You might also like

Compound Q&A

What are the main uses of 1H-Indazole-6-carbonitrile (CAS: 141290-59-7)?

1H-Indazole-6-carbonitrile finds applications in pharmaceuticals, where it serve...

141290-59-71H-Indazole-6-carbon...
Compound Q&A

How should waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) be handled?

Waste containing Dioctyl (2E)-2-butenedioate (CAS: 2997-85-5) should be collecte...

2997-85-5Dioctyl (2E)-2-buten...
Compound Q&A

What industries use Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide (CAS: 68291-98-5)?

Sodium [(1,2-benzoxazol-3-ylmethyl)sulfonyl]azanide is primarily used in pharmac...

68291-98-5Sodium [(1,2-benzoxa...
Compound Q&A

Are there alternatives to Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxylate (CAS: 741709-66-0) in synthesis?

Dimethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-2,6-pyridinedicarboxyla...

741709-66-0Dimethyl 4-(4,4,5,5-...
Compound Q&A

How should waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) be handled?

Waste containing 2-Fluoro-6-hydrazinopyridine (CAS: 80714-39-2) should be manage...

80714-39-22-Fluoro-6-hydrazino...
Compound Q&A

What is 6-Formyl-2-pyridinecarboxylic acid (CAS: 499214-11-8)?

6-Formyl-2-pyridinecarboxylic acid is an organic compound with the molecular for...

499214-11-86-Formyl-2-pyridinec...
900874-91-13-(3,4-dimethoxyphen...
Compound Q&A

How is 9H-Tribenzo[b,d,f]azepine (CAS: 29875-73-8) typically synthesized?

9H-Tribenzo[b,d,f]azepine is typically synthesized via a multi-step process invo...

29875-73-89H-Tribenzo[b,d,f]az...
Compound Q&A

How is 1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxylic acid (CAS: 1797982-51-4) typically synthesized?

1-Cyclopropyl-7-ethoxy-6-fluoro-8-methoxy-4-oxo-1,4-dihydro-3-quinolinecarboxyli...

1797982-51-41-Cyclopropyl-7-etho...
Compound Q&A

How should waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: 671820-52-3) be handled?

Waste containing Methyl 3-oxo-1,2,3,4-tetrahydro-6-quinoxalinecarboxylate (CAS: ...

671820-52-3Methyl 3-oxo-1,2,3,4...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.