On-line preconcentration in capillary electrophoresis using monolithic methacrylate polymers

Literature Information

Publication Date 2003-06-27
DOI 10.1039/B303701K
Impact Factor 4.616
Authors

Nicole E. Baryla, Nicholas P. Toltl


View Original

Abstract

Monolithic methacrylate polymers have been prepared at the inlet end of a capillary by photoinitiated polymerization and used for preconcentration in capillary electrophoresis. The function of the polymer as a preconcentration phase was demonstrated using solutions of S-propranolol. The sample was initially loaded onto the capillary using a high-pressure rinse. After removing unbound sample, the capillary was filled with separation/elution buffer from the outlet end using the electroosmotic flow as a pump (reverse polarity). The sample was desorbed as the separation/elution buffer passed through the polymer and was concentrated into a narrow band. The sample loading and desorption procedure was built into the analysis method thereby making this an on-line preconcentration procedure. A detection limit in the low nanomolar range was achieved for S-propranolol using this polymer for on-line preconcentration in capillary electrophoresis without compromising separation efficiency. The sensitivity enhancement can be improved further by rinsing the sample through the capillary for longer times, up to the saturation point of the polymer.

Related Literature

Room-temperature ferromagnetism in the two-dimensional layered Cu2MoS4 nanosheets

Ke Zhang, Rashid Khan, Hongyan Guo, Irfan Ali, Xiuling Li, Yunxiang Lin, Haiping Chen, Wensheng Yan, Xiaojun Wu, Li Song

2016-12-12 Communication

DOI: 10.1039/C6CP07270D

Corrosion inhibition of copper in aqueous chloride solution by 1H-1,2,3-triazole and 1,2,4-triazole and their combinations: electrochemical, Raman and theoretical studies

Stanley Udochukwu Ofoegbu, Tiago L. P. Galvão, José R. B. Gomes, João Tedim, Helena I. S. Nogueira, M. G. S. Ferreira

2017-02-07 Paper

DOI: 10.1039/C7CP00241F

Contents list

Front/Back Matter

DOI: 10.1039/C7CP90024D

Suitability of N-propanoic acid spiropyrans and spirooxazines for use as sensitizing dyes in dye-sensitized solar cells

Noah M. Johnson, Yuriy Y. Smolin, Daniel Hagaman, Masoud Soroush, Kenneth K. S. Lau, Hai-Feng Ji

2017-01-04 Paper

DOI: 10.1039/C6CP07853B

The decomposition of benzenesulfonyl azide: a matrix isolation and computational study

Guohai Deng, Xuelin Dong, Qifan Liu, Dingqing Li, Hongmin Li, Qiao Sun, Xiaoqing Zeng

2017-01-11 Paper

DOI: 10.1039/C6CP08125H

Fast and accurate MAS–DNP simulations of large spin ensembles

Shimon Vega

2017-01-05 Paper

DOI: 10.1039/C6CP07881H

Computational prediction of high thermoelectric performance in p-type half-Heusler compounds with low band effective mass

Teng Fang, Shuqi Zheng, Tian Zhou, Lei Yan, Peng Zhang

2017-01-09 Paper

DOI: 10.1039/C6CP07897D

You might also like

Compound Q&A

What precautions should be taken when handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3)?

When handling 4-(2-Furylmethyl)thiomorpholine 1,1-dioxide (CAS: 79206-94-3), it ...

79206-94-34-(2-Furylmethyl)thi...
Compound Q&A

What precautions should be taken when handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9)?

When handling 4-Chloro-N-[2-(4-morpholinyl)ethyl]benzamide (CAS: 71320-77-9), it...

71320-77-94-Chloro-N-[2-(4-mor...
Compound Q&A

How should waste containing 2-[2-(2-Methoxyethoxy)ethoxy]ethyl 4-methylbenzenesulfonate (CAS: 62921-74-8) be handled?

Waste containing this compound (CAS: 62921-74-8) should be handled according to ...

62921-74-82-[2-(2-Methoxyethox...
Compound Q&A

How should waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate be handled?

Waste containing (S)-Methyl 2-amino-3-cyclohexylpropanoate should be collected i...

40056-18-6(S)-Methyl 2-amino-3...
166882-70-85-({4-[(2S,4R)-4-Hyd...
Compound Q&A

Are there alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid (CAS: 7312-27-8) in synthesis?

There are several alternatives to (2E)-3-(3,4-Dichlorophenyl)acrylic acid in syn...

7312-27-8(2E)-3-(3,4-Dichloro...
Compound Q&A

How should Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84-9) be stored?

Ethyl 6-(2-nitrophenyl)imidazo[2,1-b][1,3]thiazole-3-carboxylate (CAS: 925437-84...

925437-84-9Ethyl 6-(2-nitrophen...
Compound Q&A

How should waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) be handled?

Waste containing 2-(1,3-Thiazol-2-yl)ethanamine (CAS: 18453-07-1) should be coll...

18453-07-12-(1,3-Thiazol-2-yl)...
Compound Q&A

How is Methyl 5-iodo-2-methylbenzoate (CAS: 103440-54-6) typically synthesized?

Methyl 5-iodo-2-methylbenzoate can be synthesized through the iodination of meth...

103440-54-6Methyl 5-iodo-2-meth...
Compound Q&A

How is 5-Chloro[1,2,4]triazolo[1,5-a]pyridine (CAS: 1427399-34-5) typically synthesized?

5-Chloro[1,2,4]triazolo[1,5-a]pyridine is commonly synthesized via the condensat...

1427399-34-55-Chloro[1,2,4]triaz...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.