Preparation of single-stranded PCR products for electrospray ionization mass spectrometry using the DNA repair enzyme lambda exonuclease

Literature Information

Publication Date 2000-02-24
DOI 10.1039/A908022H
Impact Factor 4.616
Authors

Allison P. Null, James C. Hannis, David C. Muddiman


View Original

Abstract

Electrospray ionization mass spectrometry (ESI-MS) has been utilized to obtain accurate mass measurements of intact PCR products; however, single-stranded PCR products are necessary to detect sequence modifications such as base substitutions, additions or deletions. The locations of these modifications can subsequently be determined using additional stages of mass spectrometry. The recombinant enzyme lambda exonuclease selectively digests one strand of a DNA duplex from a 5′ phosphorylated end leaving the complementary strand intact. Using this rapid enzymatic step, we were able to produce single-stranded PCR products by digestion of an intact PCR product derived from the Human Tyrosine Hydroxylase (HUMTHO1) gene, which contains a tetrameric repeating motif. The non-template directed 3′ adenylation common when using Taq polymerase resulted in three distinct species (blunt-ended, mono-adenylated and di-adenylated), which added complexity to the spectrum of the double-stranded product. The data from the single-stranded products shows that one strand is preferentially adenylated over the other, which cannot be determined from the mass spectrum of the double-stranded PCR product alone. The ESI-FTICR (Fourier transform ion cyclotron resonance) mass spectra of the lambda exonuclease treated PCR products exhibited less than expected signal-to-noise (S/N) ratios. This is attributed to inaccurate concentration calculations due to remaining double-stranded PCR product amplified with unphosphorylated primers, and to matrix effects contributed by the lambda exonuclease reaction buffer. To further test this hypothesis, we investigated and determined the limit of detection to be 0.27 μM using standard curve statistics for single acquisitions of a synthetic 75-mer. The concentrations of the noncoding and coding strands produced by lambda exonuclease digestion were calculated to be 0.29 and 0.37 μM, respectively, taking into account the presence of double-stranded product. The products were electrosprayed from concentrations at the limit of detection requiring the averaging of 5–10 acquisitions to produce a sufficient S/N ratio, indicating that product concentration, base composition and matrix effects play a combined, significant role in detection of lambda exonuclease treated PCR products. Although additional work will be required to further exploit this strategy, lambda exonuclease clearly provides mass spectrometrists with a method to generate single-stranded PCR products.

Related Literature

Highly selective cis-1,4 copolymerization of dienes with polar 2-(3-methylidenepent-4-en-1-yl) pyridine: an approach for recyclable elastomers

Shiyu Long, Chunji Wu, Shihui Li, Changguang Yao, Hui Na, Dongtao Liu, Tao Tang

2020-01-14 Paper

DOI: 10.1039/C9PY01811E

Self-reporting of payload release in polymer coatings based on the inner filter effect

Man Theerasilp, Daniel Crespy

2020-01-21 Paper

DOI: 10.1039/C9PY01756A

Tuning thermal properties of cross-linked DCPD polymers by functionalization, initiator type and curing methods

Ravindra S. Phatake, Alexandra Masarwa, Ofer Reany

2020-01-21 Paper

DOI: 10.1039/C9PY01178A

Precise polyethylene derivatives bearing mesogenic side-chains: delicate self-assembly depending on graft density

Wen-Ying Chang, Dong Shi, Xu-Qiang Jiang, Jia-Di Jiang, Yang Zhao, Xiang-Kui Ren, Shuang Yang, Er-Qiang Chen

2020-01-06 Paper

DOI: 10.1039/C9PY01856E

Synthetic approaches for multiblock copolymers

Jungyeon Kim, C. Remzi Becer

2020-01-08 Review Article

DOI: 10.1039/C9PY01571J

Contents list

Front/Back Matter

DOI: 10.1039/D0PY90026E

Augmented polyhydrazone formation in water by template-assisted polymerization using dual-purpose supramolecular templates

Kai Zheng, Chang He, Zhao Zhang, Hassan Traboulsi, Javed Mazher, Ali Trabolsi, Lei Fang, Mark A. Olson

2020-01-17 Paper

DOI: 10.1039/C9PY01476D

Mechanically strong and tough hydrogels with pH-triggered self-healing and shape memory properties based on a dual physically crosslinked network

Tao Liu, Shaoshuang Zou, Chen Hang, Jian Li, Xiang Di, Xiaohui Li, Qiang Wu, Fenfen Wang

2020-01-27 Paper

DOI: 10.1039/C9PY01862J

You might also like

Compound Q&A

Is 4-Benzyl-2,2-dimethylmorpholine (CAS: 84761-04-6) safe?

4-Benzyl-2,2-dimethylmorpholine is generally considered safe when handled under ...

84761-04-64-Benzyl-2,2-dimethy...
Compound Q&A

What is (5,6-Dimethoxy-3-pyridinyl)boronic acid (CAS: 1346526-61-1)?

(5,6-Dimethoxy-3-pyridinyl)boronic acid is a chemical compound with the molecula...

1346526-61-1(5,6-Dimethoxy-3-pyr...
Compound Q&A

How is 1,1,3,3-Tetramethyl-1,3-bis(2-methyl-2-propanyl)disiloxane (CAS: 67875-55-2) typically synthesized?

1,1,3,3-Tetramethyl-1,3-bis(2-methyl-2-propanyl)disiloxane is synthesized throug...

67875-55-21,1,3,3-Tetramethyl-...
Compound Q&A

What are the main uses of (2R,4S)-1-Boc-4-methylpyrrolidine-2-carboxylic acid (CAS: 1018818-04-6)?

(2R,4S)-1-Boc-4-methylpyrrolidine-2-carboxylic acid is primarily used as a build...

1018818-04-6(2R,4S)-1-Boc-4-meth...
Compound Q&A

What precautions should be taken when handling 2,3-Dichloroacrylonitrile (CAS: 22410-58-8)?

When handling 2,3-Dichloroacrylonitrile, it is crucial to wear appropriate perso...

22410-58-82,3-Dichloroacryloni...
Compound Q&A

How should (S)-1-(o-Tolyl)ethanamine hydrochloride (CAS: 1332832-16-2) be stored?

(S)-1-(o-Tolyl)ethanamine hydrochloride should be stored in a cool, dry place to...

1332832-16-2(S)-1-(o-Tolyl)ethan...
Compound Q&A

What are the physical and chemical properties of Benzyl [1-(hydroxyamino)-1-imino-2-methyl-2-propanyl]carbamate (CAS: 518047-98-8)?

Benzyl [1-(hydroxyamino)-1-imino-2-methyl-2-propanyl]carbamate (CAS: 518047-98-8...

518047-98-8Benzyl [1-(hydroxyam...
Compound Q&A

What industries use 2-Methyloxazole-5-carbaldehyde (CAS: 885273-42-7)?

2-Methyloxazole-5-carbaldehyde is used in the pharmaceutical industry for the sy...

885273-42-72-Methyloxazole-5-ca...
Compound Q&A

What is the market or research trend for 2-Methyl-2-propanyl 4-[(1S)-1-hydroxyethyl]-1-piperidinecarboxylate (CAS: 389889-82-1)?

The market for 2-Methyl-2-propanyl 4-[(1S)-1-hydroxyethyl]-1-piperidinecarboxyla...

389889-82-12-Methyl-2-propanyl ...
Compound Q&A

Is 1-Butyl-3-methylpyridinium bromide (CAS: 26576-85-2) safe?

1-Butyl-3-methylpyridinium bromide is generally considered safe for laboratory u...

26576-85-21-Butyl-3-methylpyri...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.