Modulation doping of absorbent cotton derived carbon dots for quantum dot-sensitized solar cells

Literature Information

Publication Date 2019-11-07
DOI 10.1039/C9CP04880D
Impact Factor 3.676
Authors

Shunjian Xu, Meng Zhang, Wei Zhong, Zonghu Xiao, Yongping Luo


View Original

Abstract

In order to improve the power conversion efficiency (PCE) of quantum dot-sensitized solar cells (QDSC), a series of absorbent cotton derived carbon quantum dots (CQDs) with different dopants (namely carbamide, thiourea, and 1,3-diaminopropane) have been successfully synthesized by a one-pot hydrothermal method. The average particle sizes of the three doped CQDs are 1.7 nm, 5.6 nm, and 1.4 nm respectively, smaller than that of the undoped ones (24.2 nm). The morphological and structural characteristics of the four CQDs have been studied in detail. In addition, the three doped CQDs exhibit better optical properties compared with the undoped ones in the UV-vis and PL spectra. Then CQD-based QDSC are experimentally fabricated, showing that the short current density (Jsc) and open circuit voltage (Voc) of the QDSC are distinctly improved owing to the dopants. Especially the QDSC with the 1,3-diaminopropane doped CQD achieves the highest PCE (0.527%), 299% larger than that without dopant (0.176%). In order to highlight a reasonable mechanism, the UV-vis diffuse reflectance spectrum of CQD sensitized TiO2 and the calculated energy band structures of various CQDs are investigated. It's found from the above analysis that the addition of carbamide, thiourea, and 1,3-diaminopropane is beneficial to obtain CQDs of smaller size, and with a smaller band gap and more nitrogenous or sulphureous functional groups, which enhance the light absorption performance and photo-excitation properties. The above factors are helpful to improve the Jsc of QDSC. Nitrogen, acting as a donor to the CQDs, will assist the sensitized photoanode with a higher Fermi level, resulting in a larger Voc of the QSDC. Finally this study builds the relation among the microstructure of the CQDs, three characteristics of the CQDs (namely the spectra, energy band structure and functional groups) and the photoelectric properties of the QDSC, which will provide guidance for the modulation doping of CQDs to improve the PCE of QDSC.

Related Literature

Morphology effect on antibacterial activity of cuprous oxide

Huan Pang, Feng Gao, Qingyi Lu

2009-01-05 Communication

DOI: 10.1039/B816670F

Real-time determination of chloride anion concentration in aqueous-DMSO using a pyrrole-strapped calixpyrrole anion receptor‡

Dae-Wi Yoon, Dustin E. Gross, Vincent M. Lynch, Chang-Hee Lee, Philip C. Bennett, Jonathan L. Sessler

2009-01-07 Communication

DOI: 10.1039/B818077F

Fluorescent gold nanoparticles-based fluorescence sensor for Cu2+ ions

Wenbin Chen, Xijuan Tu, Xiangqun Guo

2009-02-11 Communication

DOI: 10.1039/B820145E

(H2NC4H8NCH2CH2NH2)2Zn2Sn2Se7: a hybrid ternary semiconductor stabilized by amine molecules acting simultaneously as ligands and counterions

Aggelos Philippidis, Thomas Bakas, Pantelis N. Trikalitis

2009-02-03 Communication

DOI: 10.1039/B821859E

Nanocrystals of [Cu3(btc)2] (HKUST-1): a combined time-resolved light scattering and scanning electron microscopy study

Denise Zacher, Jianing Liu, Klaus Huber, Roland A. Fischer

2009-01-27 Communication

DOI: 10.1039/B819580C

Self-assembling optically pure Fe(A–B)3 chelates

Suzanne E. Howson, Laura E. N. Allan, Nikola P. Chmel, Guy J. Clarkson, Remy van Gorkum, Peter Scott

2009-02-04 Communication

DOI: 10.1039/B821573A

Monoalkylation of primary amines and N-sulfinylamides

José Luis García Ruano, Alejandro Parra, José Alemán, Francisco Yuste, Virginia M. Mastranzo

2008-11-24 Communication

DOI: 10.1039/B816846F

Synthesis of a pyridine-fused porphyrinoid: oxopyridochlorin

Sumito Tokuji, Yuji Takahashi, Hideyuki Shinmori, Hiroshi Shinokubo, Atsuhiro Osuka

2009-01-06 Communication

DOI: 10.1039/B819284G

You might also like

Compound Q&A

What are the main uses of (5-Sulfamoyl-3-pyridinyl)boronic acid (CAS: 951233-61-7)?

(5-Sulfamoyl-3-pyridinyl)boronic acid is primarily used in chemical synthesis, p...

951233-61-7(5-Sulfamoyl-3-pyrid...
Compound Q&A

How is Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate (CAS: 1942858-50-5) typically synthesized?

Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate is typically synthesized via est...

1942858-50-5Benzyl 2-methyl-2-(m...
Compound Q&A

What precautions should be taken when handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0)?

When handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0), it is important to use p...

209353-22-08-Fluoroquinolin-6-o...
Compound Q&A

What are the physical and chemical properties of 1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2)?

1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2) is a crystalline c...

129316-09-21,3-Dibromo-5-(2-met...
Compound Q&A

What industries use Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carboxylate (CAS: 174726-87-5)?

Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carbox...

174726-87-5Ethyl 7-chloro-4-oxo...
Compound Q&A

What precautions should be taken when handling Delta-7-Avenasterol (CAS: 23290-26-8)?

When handling Delta-7-Avenasterol (CAS: 23290-26-8), it is important to wear app...

23290-26-8Delta-7-Avenasterol
872992-20-6N-({(5R)-3-[3-Fluoro...
Compound Q&A

What precautions should be taken when handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylate (CAS: 79099-00-6)?

When handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylat...

79099-00-62-Methyl-2-propanyl ...
Compound Q&A

What is N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7)?

N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7) is a organic compou...

65542-24-7N-Methyl-4-chloroben...
Compound Q&A

Is [2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) safe?

[2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) is generally considered safe...

27306-90-7[2-(Dodecyloxy)ethox...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.