A novel biodegradable polymeric surfactant synthesized from carbon dioxide, maleic anhydride and propylene epoxide
Literature Information
Yulei Liu, Kuirong Deng, Shuanjin Wang, Min Xiao, Dongmei Han, Yuezhong Meng
Terpolymerizations of CO2, propylene epoxide (PO) and maleic anhydride (MA) using zinc adipate (ZnAA) as a catalyst were carried out in a toluene solution. A series of biodegradable terpolymers (PPCMAs) with different polyester and polycarbonate contents were synthesized. The molecular chain sequence structure of these terpolymers was proved to be a gradient one based on 1H NMR investigation combined with in situ infrared technology monitoring the reaction process. The sulfonation of biodegradable PPCMAs was carried out by the addition of sodium hydrogen sulphite into ethylenic double bonds of the unsaturated polyester unit. The surface activities and the aggregation of these sulfonated biodegradable terpolymers in aqueous solution were investigated by surface tension measurement and dynamic light scattering (DLS) technology. The results indicate that the sulfonated biodegradable terpolymer with comparable hydrophilic and hydrophobic segment contents tends to adsorb at the air/water interface and thus exhibits the best surface activities. The surface tension of the aqueous solution of the polymer with 56.8% hydrophilic segments reaches 47.5 mN m−1 at its critical micelle concentration (CMC).
Related Literature
One-pot microwave-hydrothermally synthesized carbon nanotube-cerium oxide nanocomposites for enhanced visible photodegradation of acid orange 7
Heyun Jiang, Shengsong Ge, Yu Zhang, Mei Liu, Jing Lin, Junxiang Wang, Zhanhu Guo
DOI: 10.1039/D0CP00431F
Emerging trends in the dynamics of polyelectrolyte complexes
Suvesh Manoj Lalwani, Chikaodinaka I. Eneh
DOI: 10.1039/D0CP03696J
Quantifying reversible nitrogenous ligand binding to Co(ii) porphyrin receptors at the solution/solid interface and in solution
Kristen N. Johnson, K. W. Hipps, Ursula Mazur
DOI: 10.1039/D0CP04109B
Adsorbate induced modulation of strain effects on work functions of a tungsten (100) surface
Tsan-Chuen Leung, Han Hu, An Ju Liu, Ming-Chieh Lin
DOI: 10.1039/C9CP04305E
Critical phenomenon in the room-temperature ferromagnet Ce0.65Mg0.35Co3 prepared by high-pressure annealing
Weizheng Guan, Youwei Du
DOI: 10.1039/D0CP03973J
Bulk and grain boundary Li-diffusion in dense LiMn2O4 pellets by means of isotope exchange and ToF-SIMS analysis
C. Schwab, A. Höweling, A. Windmüller, J. Gonzalez-Julian, S. Möller, J. R. Binder, S. Uhlenbruck, O. Guillon
DOI: 10.1039/C9CP05128G
Coupling between structural relaxation and diffusion in glass-forming liquids under pressure variation
Katsunori Wakabayashi
DOI: 10.1039/D0CP02761H
Ultra-low lattice thermal conductivity of monolayer penta-silicene and penta-germanene
Zhibin Gao, Zhaofu Zhang, Gang Liu, Jian-Sheng Wang
DOI: 10.1039/C9CP05246A
In situ anion-doped epitaxial strontium titanate films
O. Pacherova, N. Nepomniashchaia, V. Vetokhina, S. Cichon, T. Kocourek, A. Dejneka
DOI: 10.1039/D0CP03644G
You might also like
What are the main uses of (5-Sulfamoyl-3-pyridinyl)boronic acid (CAS: 951233-61-7)?
(5-Sulfamoyl-3-pyridinyl)boronic acid is primarily used in chemical synthesis, p...
How is Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate (CAS: 1942858-50-5) typically synthesized?
Benzyl 2-methyl-2-(methylsulfonyl)-4-pentenoate is typically synthesized via est...
What precautions should be taken when handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0)?
When handling 8-Fluoroquinolin-6-ol (CAS: 209353-22-0), it is important to use p...
What are the physical and chemical properties of 1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2)?
1,3-Dibromo-5-(2-methyl-2-propanyl)benzene (CAS: 129316-09-2) is a crystalline c...
What industries use Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carboxylate (CAS: 174726-87-5)?
Ethyl 7-chloro-4-oxo-1-(1,3-thiazol-2-yl)-1,4-dihydro-1,8-naphthyridine-3-carbox...
What precautions should be taken when handling Delta-7-Avenasterol (CAS: 23290-26-8)?
When handling Delta-7-Avenasterol (CAS: 23290-26-8), it is important to wear app...
What precautions should be taken when handling N-({(5R)-3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-1,3-oxazolidin-5-yl}methyl)acetamide (CAS: 872992-20-6)?
Proper handling involves the use of personal protective equipment such as gloves...
What precautions should be taken when handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylate (CAS: 79099-00-6)?
When handling 2-Methyl-2-proanyl 4-[(2-aminophenyl)amino]-1-piperidinecarboxylat...
What is N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7)?
N-Methyl-4-chlorobenzylamine hydrochloride (CAS: 65542-24-7) is a organic compou...
Is [2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) safe?
[2-(Dodecyloxy)ethoxy]acetic acid (CAS: 27306-90-7) is generally considered safe...
Source Journal
Polymer Chemistry

Polymer Chemistry welcomes submissions in all areas of polymer science that have a strong focus on macromolecular chemistry. Manuscripts may cover a broad range of fields, yet no direct application focus is required.












![4,10-Dihydroxy-3H-pyrano[3,4,5-kl]xanthen-3-one structure 4,10-Dihydroxy-3H-pyrano[3,4,5-kl]xanthen-3-one structure](https://static.chemtradehub.com/structs/125/1259330-61-4-de48.webp)

