Destabilization effect of transition metal fluorides on sodium borohydride

Literature Information

Publication Date 2014-08-12
DOI 10.1039/C4CP02899F
Impact Factor 3.676
Authors

Georgios N. Kalantzopoulos, Matylda N. Guzik, Stefano Deledda, Jiri Muller, Bjørn C. Hauback


View Original

Abstract

The effect of transition metal fluorides on the decomposition of NaBH4 has been investigated for NaBH4 ball milled with TiF3, MnF3 or FeF3. The compounds were examined by thermal programmed desorption with residual gas analysis, thermo gravimetric analysis and volumetric measurements using a Sieverts-type apparatus. The phase formation process during thermal decomposition was studied by in situ synchrotron radiation powder X-ray diffraction on the as-milled powders. NaBF4 was among the products in all mechano-chemical reactions. 11B-NMR spectra analysis gave NaBF4 : NaBH4 ratios of 1 : 150 for Na–Ti, 1 : 40 for Na–Mn, and 1 : 10 for Na–Fe. Pure NaBH4 possessed a hydrogen release onset temperature of 430 °C. The hydrogen release in the NaBH4–MnF3 system began as low as 130 °C. FeF3 decreased the onset temperature to 161 °C and TiF3 to 200 °C. TiF3 reacted completely with NaBH4 below 320 °C. All the examined systems have negligible emissions of diborane species. H-sorption studies performed at selected temperatures above 300 °C exhibited relatively fast desorption kinetics. Partial hydrogen re-absorption was observed for the Na–Mn and Na–Fe samples.

Related Literature

An aerodynamic assisted miniature mass spectrometer for enhanced volatile sample analysis

Yanbing Zhai, Ting Jiang, Guangyan Huang, Yongzheng Wei

2016-06-22 Paper

DOI: 10.1039/C6AN00956E

Determination of the sputtering yield of cholesterol using Arn+ and C60+(+) cluster ions

P. D. Rakowska, M. P. Seah, J.-L. Vorng, R. Havelund, I. S. Gilmore

2016-06-08 Paper

DOI: 10.1039/C6AN00791K

Rapid, accurate, and comparative differentiation of clinically and industrially relevant microorganisms via multiple vibrational spectroscopic fingerprinting

Howbeer Muhamadali, Abdu Subaihi, Mahsa Mohammadtaheri, Yun Xu, David I. Ellis, Rajesh Ramanathan, Vipul Bansal, Royston Goodacre

2016-07-07 Paper

DOI: 10.1039/C6AN00883F

Use of aminothiophenol as an indicator for the analysis of silver nanoparticles in consumer products by surface-enhanced Raman spectroscopy

Trang H. D. Nguyen, Peng Zhou, Azlin Mustapha, Mengshi Lin

2016-06-28 Paper

DOI: 10.1039/C6AN00835F

Nanoporous gold leaf as a signal amplification agent for the detection of VOCs with a quartz crystal microbalance

Lu Zhang, Yuan Liu, Han Song, Bintong Huang

2016-05-31 Paper

DOI: 10.1039/C6AN00556J

Ultrasensitive detection of thyrotropin-releasing hormone based on azo coupling and surface-enhanced resonance Raman spectroscopy

Huimin Sui, Yue Wang, Xiaolei Zhang, Xiaolei Wang, Weina Cheng, Hongyang Su, Xu Wang, Xiaoying Sun, Xiao Xia Han, Bing Zhao, Yukihiro Ozaki

2016-06-14 Paper

DOI: 10.1039/C6AN00884D

Nanoscale silicon surface-assisted laser desorption/ionization mass spectrometry: environment stability and activation by simple vacuum oven desiccation

Chia-Wen Tsao, Yuan-Jing Lin, Pi-Yu Chen, Yu-Liang Yang, Say Hwa Tan

2016-06-13 Paper

DOI: 10.1039/C6AN00659K

Assembling substrate-less plasmonic metacrystals at the oil/water interface for multiplex ultratrace analyte detection

Yih Hong Lee, Jonathan Yong Chew Ho, Yijie Yang, Xing Yi Ling

2016-07-04 Paper

DOI: 10.1039/C6AN01239F

Pseudo isobaric peptide termini labelling for relative proteome quantification by SWATH MS acquisition

Yichu Shan, Zhigang Sui, Qi Wu, Lihua Zhang, Zhen Liang, Yukui Zhang

2016-06-09 Paper

DOI: 10.1039/C6AN00388E

You might also like

Compound Q&A

What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?

When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...

71193-32-32-Chloro-1,2-bis(4-m...
Compound Q&A

What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?

4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...

224789-26-84-Ethoxy-3-(5-methyl...
Compound Q&A

How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?

Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...

2681-55-2Methyl 3-Oxo-4-Andro...
Compound Q&A

What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?

(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...

909725-61-7(R)-3-Amino-4-(3-hex...
Compound Q&A

What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?

2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...

1254120-14-32-Methyl-2-propanyl ...
Compound Q&A

Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?

There are alternative reagents that can be used in synthesis instead of (E)-4-(t...

135355-96-3(E)-4-(tert-Butoxy)-...
Compound Q&A

What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?

[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...

121202-20-8[2-(3-Chlorophenyl)-...
166249-17-8Methyl (2S)-[(4S)-2,...
Compound Q&A

What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?

The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...

42865-19-01-Bromo-2-isocyanato...
Compound Q&A

What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?

4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...

147065-06-34-Nitro-D-phenylalan...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.