Stability and binding interaction of bilirubin on a gold nano-surface: steady state fluorescence and FT-IR investigation
Literature Information
Mritunjoy Maity, Supriya Das, Nakul C. Maiti
A gold nanoparticle exhibits strong absorption and emission due to its unique physical geometry and surface plasmon resonance phenomena. A further modification with organic molecules makes it more appropriate for biological applications. The current manuscript illustrated the optical behavior and stability of bilirubin (BR) coated gold (AuBR) nanoparticles, using BR itself as a reducing agent. In addition, FT-IR and steady state fluorescence measurements were performed to illustrate the binding interaction of BR with the Au(III) ion and the nanoparticles. BR showed a strong affinity towards Au(III) and the measured binding constant was ∼4.3 × 105 M−1. It caused reduction of the Au(III) ion and rendered the formation of cubic face centered AuBR nanoparticles, which were ∼20 nm in diameter. The particles were stabilized as BR was bound to the gold nanoparticle surface, which was confirmed by FT-IR measurement. An intense carboxyl CO stretching vibration at 1695 cm−1 was observed for the BR powder but was absent for the AuBR nanoparticles. However, two weak bands at ∼1563 and 1391 cm−1, presumably due to the asymmetric and symmetric stretching vibrations of the carboxylate form (COO−), were found for the AuBR nanoparticles. A stretching vibration of lactam CO appeared at 1645 cm−1 for BR and the band was shifted to 1647 cm−1 for the AuBR nanoparticles. The stretching modes of pyrrole N–H and lactam N–H were detected at 3406 cm−1 and 3267 cm−1, respectively, for BR. However, the pyrrole N–H band shifted to 3446 cm−1 and became broader for the AuBR nanoparticles. The observed blue shift in the lactam CO and N–H vibrations of the AuBR nanoparticles indicated a weakening/absence of internal hydrogen bonds between the carboxyl groups and the four N–H bonds in the BR moiety. The binding of BR to the surface provides great stability to the nanoparticles, which remained monodispersed in the large pH range (pH 4 to 12) for more than a month. However, under acidic pH conditions the particles associated to form bigger particles and the plasmon resonance band shifted as they grew; the plasmon resonance band shifted from 525 nm (at pH 7.0) to 555 nm (at pH 3.0). The particles also remained stable in the presence of a higher concentration of salt (KCl and NaCl) in the dispersing media.
Recommended Journals
Related Literature
Use of aminothiophenol as an indicator for the analysis of silver nanoparticles in consumer products by surface-enhanced Raman spectroscopy
Trang H. D. Nguyen, Peng Zhou, Azlin Mustapha, Mengshi Lin
DOI: 10.1039/C6AN00835F
An integrated, peptide-based approach to site-specific protein immobilization for detection of biomolecular interactions
Dennis W. P. M. Löwik, Wilbert C. Boelens, Jan C. M. van Hest, Ger J. M. Pruijn
DOI: 10.1039/C6AN00154H
Boronic acid based imprinted electrochemical sensor for rutin recognition and detection
Chunlei Wang, Qi Wang, Min Zhong, Xianwen Kan
DOI: 10.1039/C6AN01294A
Surface-enhanced resonance Raman scattering of hemoproteins and those in complicated biological systems
Yasutaka Kitahama, Yukihiro Ozaki
DOI: 10.1039/C6AN01009A
iHEART: a miniaturized near-infrared in-line gas sensor using heart-shaped substrate-integrated hollow waveguides
Rafael L. Ribessi, Thiago de A. Neves, Jarbas J. R. Rohwedder, Celio Pasquini, Ivo M. Raimundo, Jr., Andreas Wilk, Vjekoslav Kokoric, Boris Mizaikoff
DOI: 10.1039/C6AN01027J
An aerodynamic assisted miniature mass spectrometer for enhanced volatile sample analysis
Yanbing Zhai, Ting Jiang, Guangyan Huang, Yongzheng Wei
DOI: 10.1039/C6AN00956E
A molecularly imprinted electrochemiluminescence sensor based on the mimetic enzyme catalytic effect for ultra-trace Ni2+ determination
Bin Yang, Jianping Li, Lianming Zhang
DOI: 10.1039/C6AN00926C
Preparation of an aptamer based organic–inorganic hybrid monolithic column with gold nanoparticles as an intermediary for the enrichment of proteins
Jin-cheng Zhao, Qing-yun Zhu, Ling-yu Zhao, Hong-zhen Lian, Hong-yuan Chen
DOI: 10.1039/C6AN00957C
Structural characterization of PEGylated polyethylenimine-entrapped gold nanoparticles: an NMR study
Benqing Zhou, Mingwu Shen, István Bányai
DOI: 10.1039/C6AN00841K
Epigenetic changes in cancer by Raman imaging, fluorescence imaging, AFM and scanning near-field optical microscopy (SNOM). Acetylation in normal and human cancer breast cells MCF10A, MCF7 and MDA-MB-231
Halina Abramczyk, Jakub Surmacki, Monika Kopeć, Alicja Klaudia Olejnik, Agnieszka Kaufman-Szymczyk, Krystyna Fabianowska-Majewska
DOI: 10.1039/C6AN00859C
You might also like
What precautions should be taken when handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3)?
When handling 2-Chloro-1,2-bis(4-methylphenyl)ethanone (CAS: 71193-32-3), it is ...
What industries use 4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl)benzenesulfonyl chloride (CAS: 224789-26-8)?
4-Ethoxy-3-(5-methyl-4-oxo-7-propyl-1,4-dihydroimidazo[5,1-f][1,2,4]triazin-2-yl...
How should Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) be stored?
Methyl 3-Oxo-4-Androsten-17-Carboxylate (CAS: 2681-55-2) should be stored in a c...
What are the main uses of (R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid (CAS: 909725-61-7)?
(R)-3-Amino-4-(3-hexylphenylamino)-4-oxobutylphosphonic acid is primarily used i...
What regulatory guidelines apply to 2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-3)?
2-Methyl-2-propanyl 3-amino-3-carbamoyl-1-azetidinecarboxylate (CAS: 1254120-14-...
Are there alternatives to (E)-4-(tert-Butoxy)-4-oxobut-2-enoic acid (CAS: 135355-96-3) in synthesis?
There are alternative reagents that can be used in synthesis instead of (E)-4-(t...
What are the physical and chemical properties of [2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8)?
[2-(3-Chlorophenyl)-1,3-thiazol-4-yl]methanol (CAS: 121202-20-8) is a crystallin...
What is the market or research trend for Methyl (2S)-[(4S)-2,2-dimethyl-1,3-dioxolan-4-yl]{[(4-methylphenyl)sulfonyl]oxy}acetate (CAS: 166249-17-8)?
The market and research trends for Methyl (2S)-[(4S)-2,2-dimethyl-1,3-dioxolan-4...
What is the market or research trend for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0)?
The market for 1-Bromo-2-isocyanatoethane (CAS: 42865-19-0) is driven by its use...
What are the main uses of 4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3)?
4-Nitro-D-phenylalanine hydrochloride (CAS: 147065-06-3) is primarily used in re...
Source Journal
Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.










![Methyl 5-iodo-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-2-thiophenecarboxylate structure Methyl 5-iodo-3-({[(2-methyl-2-propanyl)oxy]carbonyl}amino)-2-thiophenecarboxylate structure](https://static.chemtradehub.com/structs/100/1007171-35-8-177e.webp)
![4-[2-(3,4-Dihydro-2H-chromen-6-yl)-1,3-oxazol-5-yl]-1-(3-{[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl}benzyl)pyridinium bromide structure 4-[2-(3,4-Dihydro-2H-chromen-6-yl)-1,3-oxazol-5-yl]-1-(3-{[(2,5-dioxo-1-pyrrolidinyl)oxy]carbonyl}benzyl)pyridinium bromide structure](https://static.chemtradehub.com/structs/155/155863-03-9-8183.webp)
![4-[(2-Oxo-1,2,3,4-tetrahydroquinolin-7-yl)oxy]butanoic acid structure 4-[(2-Oxo-1,2,3,4-tetrahydroquinolin-7-yl)oxy]butanoic acid structure](https://static.chemtradehub.com/structs/588/58899-27-7-1f86.webp)
![(3aR,7R,7aR)-2,2-Diethyl-3a,6,7,7a-tetrahydro-7-[(methylsulfonyl)oxy]-1,3-benzodioxole-5-carboxylic Acid Ethyl Ester structure (3aR,7R,7aR)-2,2-Diethyl-3a,6,7,7a-tetrahydro-7-[(methylsulfonyl)oxy]-1,3-benzodioxole-5-carboxylic Acid Ethyl Ester structure](https://static.chemtradehub.com/structs/204/204254-90-0-7172.webp)
