Dispersion of PM and VOC pollutants from open burning of municipal solid wastes on host communities: emission inventory estimation and dispersion modelling study
Literature Information
Adewemimo Oluwakunmi Popoola, Lukuman Adekilekun Jimoda, Olusesan Abel Olu-Arotiowa, Oyetola Ogunkunle, Opeyeolu Timothy Laseinde, Sunday Adekunle Adebanjo, Wuraola Abake Raji
The emissions from open burning of municipal solid wastes (MSWs) are very harmful. Owing to the scarcity of information on the impact of open burning of MSW on the onsite workers and the population within the vicinity of the Sokoto-Aiyekale dump site in Ilorin, Kwara State, this study focused on examining the impact of open burning of solid waste at the dump site on its host communities. The criteria air pollutants (CAPs) such as particulate matter (PM) and volatile organic compounds (VOCs) were determined using the emission factor approach. Deposition gauges were deployed at selected sampling spots to collect particulates which were characterized for heavy metal concentrations for the wet and dry seasons using energy dispersive X-ray fluorescence (EDXRF). The seasonal deposition fluxes, the deposition velocities and the scavenging ratios of the elements were estimated. The ground level concentrations of each of the CAPs within a 15 km radius were predicted using the AERMOD software (Version 8.2.0). The results showed that the emission inventory for PM and VOCs is in the range of 2200.5–2481.1 and 5913.9–6668.0 tons per annum between 2016 and 2020, respectively. Fourteen elements (Fe, Au, Ag, Pd, Rh, Cd, Zn, In, Sn, Cu, Mn, Ti, Ru, and S) were identified from the deposition study, with Fe having the highest concentration of 67 512.8 and 73 845.5 μg m−3 in the wet and dry seasons, respectively. The wet and dry deposition fluxes ranged from 7.32 to 11.46 and 38.83 to 88.8 g per m2 per month, respectively. Deposition velocities of the trace metals were in the range of 0.0000528–0.00075444 and 0.0003377–0.0048183 m s−1 in the wet and dry seasons, respectively. The average 1, 8, 24 h, and annual concentrations were 16 175, 6634, 3190 and 409 μg m−3 for PM and 20 959, 7000, 3700 and 418 μg m−3 for VOCs, respectively. This research shows that open burning of solid wastes is characterized by harmful gaseous emissions and heavy metals with potential adverse effects on receptor communities. These findings will serve as baseline information for environmental protection agencies.
Related Literature
Macro-RAFT agent mediated dispersion polymerization: the monomer concentration effect on the morphology of the in situ synthesized block copolymer nano-objects
Zhonglin Ding, Chengqiang Gao, Shuang Wang, Hui Liu, Wangqing Zhang
DOI: 10.1039/C5PY01202C
Fabrication of polyacrylonitrile hollow fiber membranes from ionic liquid solutions
DooLi Kim, Suzana Pereira Nunes
DOI: 10.1039/C5PY01344E
Sustainable, eco-friendly polyesters synthesized from renewable resources: preparation and thermal characteristics of poly(dimethyl-propylene furanoate)
Vasilios Tsanaktsis, Zoe Terzopoulou, Dimitrios N. Bikiaris, Dimitris S. Achilias, Dimitrios G. Papageorgiou, George Z. Papageorgiou
DOI: 10.1039/C5PY01367D
Dithiocarbamate RAFT agents with broad applicability – the 3,5-dimethyl-1H-pyrazole-1-carbodithioates
James Gardiner, Ivan Martinez-Botella, John Tsanaktsidis, Graeme Moad
DOI: 10.1039/C5PY01382H
Influence of the secondary structure on the AIE-related emission behavior of an amphiphilic polypeptide containing a hydrophobic fluorescent terminal and hydrophilic pendant groups
Li-Yang Lin, Po-Chiao Huang, Deng-Jie Yang, Jhen-Yan Gao, Jin-Long Hong
DOI: 10.1039/C5PY01485A
The influence of surface grafting on the growth rate of polymer chains
Chengjun Kang, Rowena Crockett, Nicholas D. Spencer
DOI: 10.1039/C5PY01521A
One-step grafting of polymers to graphene oxide
Helen R. Thomas, Daniel J. Phillips, Neil R. Wilson, Matthew I. Gibson, Jonathan P. Rourke
DOI: 10.1039/C5PY01358E
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...












![1-[(4-Methylphenyl)sulfonyl]-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine-5-carbonitrile structure 1-[(4-Methylphenyl)sulfonyl]-3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-pyrrolo[2,3-b]pyridine-5-carbonitrile structure](https://static.chemtradehub.com/structs/143/1434747-57-5-fc0d.webp)


