Surface functionalization of endotracheal tubes coated with laccase–gadolinium phosphate hybrid nanoparticles for antibiofilm activity and contrasting properties
Literature Information
Somayeh Mojtabavi, Seyed Ali Asghar Fakhrmousavi, Mehrdad Faizi, Hamid Forootanfar, Nasrin Samadi, Mohammad Ali Faramarzi
Ventilator-associated pneumonia (VAP) is a severe hospital-acquired infection that endangers patients’ treatment in intensive care units (ICUs). One of the leading causes of VAP is biofilm formation on the endotracheal tube (ETT) during ventilation. This study reports a combination of laccase–gadolinium phosphate hybrid nanoparticles (laccase@GdPO4·HNPs) and enzyme mediator with an antibiofilm property coated on the surface of the ETT. The hybrid nanostructures were fabricated through a simple, rapid, and facile laccase immobilization method, resulting in efficiency and yield percentages of 82 ± 6% and 83 ± 5%, respectively. The surface of the ETT was then functionalized and coated with the constructed HNP/catechol. The layered ETT was able to reduce the surface adhesion of Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus by 82.1%, 84.5%, and 77.1%, respectively. The prepared ETT did not affect the viability of human lung epithelial cells L929 and A549 at concentrations of 1–5 mg mL−1. The layered ETT produced a strong computed tomography (CT) signal in comparison with iobitridol. The HNP/catechol-coated ETT exhibited a Gd3+ release of 0.45 ppm over 72 h, indicating reduced risks of cytotoxicity arising from the metal ions. In this research we develop a biofilm-resistant and contrasting agent-based ETT coated with green synthesized laccase@GdPO4·HNPs.
Related Literature
Interface induced magnetic properties of Gd/Co heterostructures
C. L. Prajapat, M. Gupta, Harsh Bhatt, Yogesh Kumar, V. Karki
DOI: 10.1039/C8CP02909A
Cyclization reaction dynamics of an inverse type diarylethene derivative as revealed by time-resolved absorption and fluorescence spectroscopies
Hikaru Sotome, Daichi Kitagawa, Tatsumoto Nakahama, Syoji Ito, Seiya Kobatake, Masahiro Irie, Hiroshi Miyasaka
DOI: 10.1039/C8CP07393G
Antiferromagnetic ordering based on intermolecular London dispersion interactions in amphiphilic TEMPO ammonium salts
Jessica Exner, Steffen Eusterwiemann, Oliver Janka, Oliver Niehaus, Constantin G. Daniliuc, Rainer Pöttgen, Armido Studer
DOI: 10.1039/C8CP05837G
Energy loss analysis in photoelectrochemical water splitting: a case study of hematite photoanodes
Zhiliang Wang, Miaoqiang Lyu, Peng Chen, Songcan Wang, Lianzhou Wang
DOI: 10.1039/C8CP04021D
The metal–ionic liquid interface as characterized by impedance spectroscopy and in situ scanning tunneling microscopy
Claus Müller
DOI: 10.1039/C8CP02074D
Why does 4-biphenyl carbonyl azide have ultra-short lived excited states? An ultrafast UV-vis spectroscopic and computational study
DOI: 10.1039/C8CP05963B
Effects of hydrogen bonding on the gas-phase reactivity of didehydroisoquinolinium cation isomers
Nelson R. Vinueza, Bartłomiej J. Jankiewicz, Vanessa A. Gallardo, John J. Nash, Hilkka I. Kenttämaa
DOI: 10.1039/C8CP03350A
Excited state dynamics study of the self-trapped exciton formation in silicon nanosheets
Naeem Ullah, Shunwei Chen
DOI: 10.1039/C8CP04806A
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Biomaterials Science

Biomaterials Science is an international high impact journal exploring the science of biomaterials and their translation towards clinical use. Its scope encompasses new concepts in biomaterials design, studies into the interaction of biomaterials with the body, and the use of materials to answer fundamental biological questions. Papers do not necessarily need to report a new biomaterial but should provide novel insight into the biological applications of the biomaterial. Articles that primarily focus on demonstrating novel materials chemistry and bring a molecular picture to bear on a given material’s suitability as a biomaterial are more suited to our companion journal, Journal of Materials Chemistry B. Biomaterials Science publishes primary research and review-type articles in the following areas: molecular design of biomaterials, including translation of emerging chemistries to biomaterials science of cells and materials at the nanoscale and microscale materials as model systems for stem cell and human biology materials for tissue engineering and regenerative medicine (Nano)materials and (nano)systems for therapeutic delivery interactions at the biointerface biologically inspired and biomimetic materials, including bio-inspired self-assembly systems and cell-inspired synthetic tools next-generation biomaterials tools and methods












![[(1S,2S,3R,4S,7R,9S,10S,12R,15S)-4,12-Diacetyloxy-15-[(2R,3S)-3-benzamido-3-phenyl-2-(2,2,2-trichloroethoxycarbonyloxy)propanoyl]oxy-1,9-dihydroxy-10,14,17,17-tetramethyl-11-oxo-6-oxatetracyclo[11.3.1.03,10.04,7]heptadec-13-en-2-yl] benzoate structure [(1S,2S,3R,4S,7R,9S,10S,12R,15S)-4,12-Diacetyloxy-15-[(2R,3S)-3-benzamido-3-phenyl-2-(2,2,2-trichloroethoxycarbonyloxy)propanoyl]oxy-1,9-dihydroxy-10,14,17,17-tetramethyl-11-oxo-6-oxatetracyclo[11.3.1.03,10.04,7]heptadec-13-en-2-yl] benzoate structure](https://static.chemtradehub.com/structs/100/100431-55-8-7104.webp)

