A simple, quick and non-destructive approach for sampling drugs of abuse in tablets and blotter for qualitative analysis by paper spray mass spectrometry
Literature Information
Mariana C. C. Diniz, Yuri Machado, Evandro Piccin
This study presents the development of a simple, fast, and inexpensive approach for the direct analysis of new psychoactive substances (NPS) in seized tablets and blotter paper, with improved sample preservation and increased analytical frequency. Paper triangles were gently rubbed against the surface of the samples containing synthetic drugs and then subjected to analysis by paper spray ionization mass spectrometry (PS-MS). Seized samples containing lysergic acid diethylamide (LSD) and several other substances from the classes of amphetamines, N-benzyl-substituted phenethylamines, synthetic cathinones, and synthetic cannabinoids, were analysed. Three types of paper were tested (filter paper, blotter paper, and synthetic paper) and several combinations of spray solvents were studied for the optimization. All samples were weighed and photographed before and after sequences of analysis in order to attest to the sample preservation. The results revealed that the approach is excellent for sample preservation, with less than 5% of mass loss even after 27 consecutive analyses. Moreover, no significant signal decreases were observed in mass spectrometry (MS) even after the experiments. It was possible to unequivocally identify illicit substances from seized samples (pills and blotter paper). By overcoming the solubilization and wet extraction process used for sample preparation, the waste was restricted to a volume of only 10 μL of solvent for the PS-MS analysis. The main advantage of our approach over existing methods is the sample preparation, which is simple and quick since the samples are just rubbed against the PS paper. This brings enormous benefits in terms of analytical frequency, economy of time and low consumption of solvents. Another important point is that the sample can remain intact for further analysis, which is crucial in forensic analysis.
Related Literature
Bulk phase behavior of lithium imide–metal nitride ammonia decomposition catalysts‡
Thomas J. Wood, Ronald I. Smith, Claire A. Murray
DOI: 10.1039/C8CP02824A
Atomistic reverse nonequilibrium molecular dynamics simulation of the viscosity of ionic liquid 1-n-butyl 3-methylimidazolium bis(trifluoromethylsulfonyl)imide [bmim][Tf2N]
Rouhollah Safinejad, Nargess Mehdipour, Hossein Eslami
DOI: 10.1039/C8CP02393J
Total electron scattering cross sections from para-benzoquinone in the energy range 1–200 eV
A. I. Lozano, J. C. Oller, D. B. Jones, M. T. do N. Varella, M. H. F. Bettega, F. Ferreira da Silva, P. Limão-Vieira, M. A. P. Lima, R. D. White, M. J. Brunger, F. Blanco, A. Muñoz, G. García
DOI: 10.1039/C8CP03297A
Adsorption, surface relaxation and electrolyte structure at Pt(111) electrodes in non-aqueous and aqueous acetonitrile electrolytes
Gary S. Harlow, Iain M. Aldous, Yvonne Gründer, Laurence J. Hardwick, Christopher A. Lucas
DOI: 10.1039/C9CP00499H
Role of the carbon source in the transformation of amorphous carbon to graphene during rapid thermal processing
Yong Zhou, Xiaowei Xu, Aiying Wang, Kwang-Ryeol Lee
DOI: 10.1039/C9CP01305A
Quantum-classical dynamics of the capture of neon atoms by superfluid helium nanodroplets
Miquel Blancafort-Jorquera, Arnau Vilà, Miguel González
DOI: 10.1039/C8CP05140B
Electronic structures and transport properties of SnS–SnSe nanoribbon lateral heterostructures
Zhuang Luo, Yandong Guo, Dewei Rao
DOI: 10.1039/C9CP00427K
Charge polarization in partially lithiated single-walled carbon nanotubes
A. A. Makarova
DOI: 10.1039/C8CP01510D
You might also like
What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?
4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...
What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?
2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...
How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?
2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...
What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?
Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...
How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?
4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...
What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?
4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...
What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?
Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...
What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?
The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...
How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?
1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...
How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?
5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...
Source Journal
Analytical Methods

Analytical Methods welcomes early applications of new analytical and bioanalytical methods and technology demonstrating the potential for societal impact. We require that methods and technology reported in the journal are sufficiently innovative, robust, accurate, and compared to other available methods for the intended application. Developments with interdisciplinary approaches are particularly welcome. Systems should be proven with suitably complex and analytically challenging samples. We encourage developments within, but not limited to, the following technologies and applications: global health, point-of-care and molecular diagnostics biosensors and bioengineering drug development and pharmaceutical analysis applied microfluidics and nanotechnology omics studies, such as proteomics, metabolomics or glycomics environmental, agricultural and food science neuroscience biochemical and clinical analysis forensic analysis industrial process and method development













![[(1S,2S,3R,4S,7R,9S,10S,12R,15S)-4,12-Diacetyloxy-15-[(2R,3S)-3-benzamido-3-phenyl-2-(2,2,2-trichloroethoxycarbonyloxy)propanoyl]oxy-1,9-dihydroxy-10,14,17,17-tetramethyl-11-oxo-6-oxatetracyclo[11.3.1.03,10.04,7]heptadec-13-en-2-yl] benzoate structure [(1S,2S,3R,4S,7R,9S,10S,12R,15S)-4,12-Diacetyloxy-15-[(2R,3S)-3-benzamido-3-phenyl-2-(2,2,2-trichloroethoxycarbonyloxy)propanoyl]oxy-1,9-dihydroxy-10,14,17,17-tetramethyl-11-oxo-6-oxatetracyclo[11.3.1.03,10.04,7]heptadec-13-en-2-yl] benzoate structure](https://static.chemtradehub.com/structs/100/100431-55-8-7104.webp)
