UV light irradiation combined with nitrate for degradation of bisphenol A: kinetics, transformation pathways, and acute toxicity assessment

Literature Information

Publication Date 2022-01-03
DOI 10.1039/D1EW00796C
Impact Factor 4.251
Authors

Zhiquan Li, Fengxun Tan, Xuedong Zhai, Shishun Wang, Xiaoxiang Cheng, Fumiao Zhang, Mingli Li, Qiao Ma


View Original

Abstract

As an endocrine disruptor, bisphenol A (BPA) is a severe threat to human health. In this study, nitrate (NO3−) photolysis with a low-pressure UV lamp (LP-UV) was employed to degrade BPA in different aqueous solutions. Results showed that BPA could be decomposed efficiently in the UV/NO3− process. Moreover, the contributions of UV irradiation (4.1%), ˙OH (52.7%), and reactive nitrogen species (43.2%) were obtained. The observed rate constant of BPA degradation (kobs) increased with NO3− concentration since more active species were generated in high NO3− concentration. The BPA degradation rate was significantly accelerated as the pH value rose. This was ascribed to the increase of the molar absorption coefficient and the amount of ionic BPA under alkaline conditions. kobs declining with increasing BPA concentration resulted from the inner filter effect and the competition of more generated intermediate products. The increasing kobs with the addition of HCO3−/CO32− (0–10 mM) was explained as the accumulation of ˙NO2 in the presence of HCO3−/CO32− in UV/NO3− process. The effect of Cl− (0–20 mM) could be ignored in this study, which suggested that reactive chlorine radicals degraded BPA effectively. The kobs reduced acutely when NOM (0–5 mgC L−1) existed in the solution, and this could be ascribed to the dual roles of the NOM inner filter effect and reactive radical scavenging effect. Further, several degradation products were detected, and possible transformation pathways were put forward. Remarkably, the acute toxicity of BPA was slightly enhanced then decayed in the UV/NO3− process.

Related Literature

Introduction of self-healing properties into covalent polymer networks via the photodissociation of alkoxyamine junctions

Siham Telitel, Yoshifumi Amamoto, Julien Poly, Fabrice Morlet-Savary, Olivier Soppera, Jacques Lalevée, Krzysztof Matyjaszewski

2013-09-26 Paper

DOI: 10.1039/C3PY01162C

Front cover

2021-03-19 Cover

DOI: 10.1039/C3PY90083E

One-pot synthesis of responsive sulfobetaine nanoparticles by RAFT polymerisation: the effect of branching on the UCST cloud point

Helen Willcock, Annhelen Lu, Claire F. Hansell, Emma Chapman, Ian R. Collins, Rachel K. O'Reilly

2013-10-25 Paper

DOI: 10.1039/C3PY00998J

Fabrication of aggregation induced emission dye-based fluorescent organic nanoparticles via emulsion polymerization and their cell imaging applications

Xiqi Zhang, Bin Yang, Meiying Liu, Wanyun Liu, Yiwang Chen, Yen Wei

2013-08-20 Paper

DOI: 10.1039/C3PY00984J

On the effect of using RAFT and FRP for the bulk synthesis of acrylic and methacrylic molecularly imprinted polymers

Carlo Gonzato, Pamela Pasetto, Fahmi Bedoui, Pierre-Emmanuel Mazeran, Karsten Haupt

2013-10-24 Paper

DOI: 10.1039/C3PY01246H

Hyperbranched polyisobutylenes for self-healing polymers

D. Döhler, P. Zare, W. H. Binder

2013-10-03 Paper

DOI: 10.1039/C3PY01151H

Polyacetylenes containing BODIPY pendants with different connectivities: synthesis, characterization and opto-electronic properties

Bin Liu, Lingfeng Li, Cuiling Lin, Jingdan Zhou, Zhexin Zhu, Hongyao Xu, Huayu Qiu, Shouchun Yin

2013-09-11 Paper

DOI: 10.1039/C3PY01021J

Facile preparation and cell imaging applications of fluorescent organic nanoparticles that combine AIE dye and ring-opening polymerization

Xiqi Zhang, Xiaoyong Zhang, Bin Yang, Junfeng Hui, Meiying Liu, Zhenguo Chi, Siwei Liu, Jiarui Xu, Yen Wei

2013-09-10 Communication

DOI: 10.1039/C3PY01143G

You might also like

Compound Q&A

What are the main uses of 4-Nitrophenyl phosphate disodium salt hexahydrate (CAS: 333338-18-4)?

4-Nitrophenyl phosphate disodium salt hexahydrate is primarily used as a substra...

333338-18-44-Nitrophenyl phosph...
Compound Q&A

What are the main uses of 2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4)?

2-(Trifluoromethyl)-1,3-oxazole-4-carboxylic Acid (CAS: 1060816-01-4) is widely ...

1060816-01-42-(Trifluoromethyl)-...
Compound Q&A

How should 2-Fluoro-4-biphenylcarboxylic acid (CAS: 137045-30-8) be stored?

2-Fluoro-4-biphenylcarboxylic acid should be stored in a cool, dry place at room...

137045-30-82-Fluoro-4-biphenylc...
Compound Q&A

What industries use Prednisolone-21-Carboxylic Acid (CAS: 61549-70-0)?

Prednisolone-21-Carboxylic Acid is primarily used in the pharmaceutical industry...

61549-70-0Prednisolone-21-Carb...
Compound Q&A

How should 4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) be stored?

4-(Hydrazinomethyl)-1,2,3-benzenetriol (CAS: 3614-72-0) should be stored in a co...

3614-72-04-(Hydrazinomethyl)-...
Compound Q&A

What industries use 4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8)?

4-Amino-1-methyl-1H-pyrazole-5-carboxylic acid hydrochloride (CAS: 92534-70-8) i...

92534-70-84-Amino-1-methyl-1H-...
Compound Q&A

What regulatory guidelines apply to dehydropachymic acid (CAS: 77012-31-8)?

Dehydropachymic acid (CAS: 77012-31-8) is regulated by various agencies. It fall...

77012-31-8Dehydropachymic acid
Compound Q&A

What is the market or research trend for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic acid (CAS: 898561-66-5)?

The market and research trends for 6-[(2,2-Dimethylpropanoyl)amino]nicotinic aci...

898561-66-56-[(2,2-Dimethylprop...
Compound Q&A

How should 1,10-Phenanthroline-2,9-dicarbaldehyde (CAS: 57709-62-3) be stored?

1,10-Phenanthroline-2,9-dicarbaldehyde should be stored in a cool, dry place awa...

57709-62-31,10-Phenanthroline-...
Compound Q&A

How is 5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate (CAS: 113952-21-9) typically synthesized?

5-Carbamoyl-11-oxo-10,11-dihydro-5H-dibenzo[b,f]azepin-10-yl acetate can be synt...

113952-21-95-Carbamoyl-11-oxo-1...
Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.