Acoustofluidic particle trapping, manipulation, and release using dynamic-mode cantilever sensors
Literature Information
Blake N. Johnson, Raj Mutharasan
We show here that dynamic-mode cantilever sensors enable acoustofluidic fluid mixing and trapping of suspended particles as well as the rapid manipulation and release of trapped micro-particles via mode switching in liquid. Resonant modes of piezoelectric cantilever sensors over the 0 to 8 MHz frequency range are investigated. Sensor impedance response, flow visualization studies using dye and micro-particle tracers (100 μm diameter), and finite element simulations of cantilever modal mechanics and acoustic streaming show fluid mixing and particle trapping configurations depend on the resonant mode shape. We found trapped particles could be: (1) rapidly manipulated on millimeter length scales, and (2) released from the cantilever surface after trapping by switching between low- and high-order resonant modes (less than 250 kHz and greater than 1 MHz, respectively). Such results suggest a potentially promising future for dynamic-mode cantilevers in separations, pumping and mixing applications as well as acoustofluidic-enhanced sensing applications.
Related Literature
Identification of intermediates of a molecular ruthenium catalyst for water oxidation using in situ electrochemical X-ray absorption spectroscopy
Huacai Yan, Fusheng Li, Qingyu Kong
DOI: 10.1039/D1CP03837K
Enhanced strain-induced magnetoelectric coupling in polarization-free Fe/BaTiO3 heterostructures
Carlos O. Amorim, João S. Amaral, Vítor S. Amaral
DOI: 10.1039/D1CP00885D
An interplay of various damage channels in polyethylene exposed to ultra-short XUV/X-ray pulses
P. Babaev, J. Chalupský, A. E. Volkov
DOI: 10.1039/D1CP02199K
Sequence-dependent aggregation-prone conformations of islet amyloid polypeptide
Bumjoon Choi, Nam Hyeong Kim, Geun Young Jin, Yung Sam Kim, Kilho Eom
DOI: 10.1039/D1CP01061A
Reactive force fields for aqueous and interfacial magnesium carbonate formation
Siavash Zare, Mohammad Javad Abdolhosseini Qomi
DOI: 10.1039/D1CP02627E
Designing nanoscale capacitors based on twin-graphene
Jyotirmoy Deb, Harkishan Dua, Utpal Sarkar
DOI: 10.1039/D1CP02680A
Theoretical study of spodium bonding in the active site of three Zn-proteins and several model systems
Rosa Llull, Gaizca Montalbán, Ivan Vidal, Rosa M. Gomila, Antonio Bauzá, Antonio Frontera
DOI: 10.1039/D1CP02150H
Insights on peptide topology in the computational design of protein ligands: the example of lysozyme binding peptides
Cristina Cantarutti, M. Cristina Vargas, Mireille Dumoulin, Sara La Manna, Daniela Marasco, Carlo Santambrogio, Rita Grandori, Giacinto Scoles, Alessandra Corazza
DOI: 10.1039/D1CP02536H
Kinetic and thermodynamic stability comparison for the fibrillar form of small amyloid-β(1–42) oligomers using scaled molecular dynamics
Debasis Saha, Biman Jana
DOI: 10.1039/D1CP01866C
You might also like
What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?
When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...
What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?
4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...
How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?
5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...
What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?
The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...
Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?
[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...
What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?
3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...
What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?
N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...
What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?
This compound is primarily used in the pharmaceutical industry for the synthesis...
How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?
2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...
What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?
Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...
Source Journal
Analyst

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.












![Methyl 3-({2'-[(E)-(hydroxyhydrazono)methyl]-4-biphenylyl}methyl)-2-oxo-2,3-dihydro-1H-benzimidazole-4-carboxylate structure Methyl 3-({2'-[(E)-(hydroxyhydrazono)methyl]-4-biphenylyl}methyl)-2-oxo-2,3-dihydro-1H-benzimidazole-4-carboxylate structure](https://static.chemtradehub.com/structs/149/1499167-72-4-034a.webp)

![6-Bromo-3-ethyl-3H-imidazo[4,5-b]pyridine structure 6-Bromo-3-ethyl-3H-imidazo[4,5-b]pyridine structure](https://static.chemtradehub.com/structs/103/1033202-59-3-2a8f.webp)