Interdependence of initial cell density, drug concentration and exposure time revealed by real-time impedance spectroscopic cytotoxicity assay

Literature Information

Publication Date 2015-04-01
DOI 10.1039/C5AN00097A
Impact Factor 4.616
Authors

C. Caviglia, K. Zór, S. Canepa, M. Carminati, L. B. Larsen, R. Raiteri, T. L. Andresen, A. Heiskanen, J. Emnéus


View Original

Abstract

We investigated the combined effect of the initial cell density (12 500, 35 000, 75 000, and 100 000 cells cm−2) and concentration of the anti-cancer drug doxorubicin on HeLa cells by performing time-dependent cytotoxicity assays using real-time electrochemical impedance spectroscopy. A correlation between the rate of cell death and the initial cell seeding density was found at 2.5 μM doxorubicin concentration, whereas this was not observed at 5 or 100 μM. By sensing the changes in the cell–substrate interaction using impedance spectroscopy under static conditions, the onset of cytotoxicity was observed 5 h earlier than when using a standard colorimetric end-point assay (MTS) which measures changes in the mitochondrial metabolism. Furthermore, with the MTS assay no cytotoxicity was observed after 15 h of incubation with 2.5 μM doxorubicin, whereas the impedance showed at this time point cell viability that was below 25%. These results indicate that impedance detection reveals cytotoxic events undetectable when using the MTS assay, highlighting the importance of combining impedance detection with traditional drug toxicity assays towards a more in depth understanding of the effect of anti-cancer drugs on in vitro assays. Moreover, the detection of doxorubicin induced toxicity determined with impedance under static conditions proved to be 6 times faster than in perfusion culture.

Related Literature

Editorial – From nanopores to nanochannels

2015-06-19 Editorial

DOI: 10.1039/C5AN90056E

A highly efficient three-phase single drop microextraction technique for sample preconcentration

Sharmin Jahan, Haiyang Xie, Ran Zhong, Jian Yan, Hua Xiao, Liuyin Fan, Chengxi Cao

2015-02-16 Paper

DOI: 10.1039/C4AN02324B

On-chip gradient generation in 256 microfluidic cell cultures: simulation and experimental validation

Himali Somaweera, Shehan O. Haputhanthri, Akif Ibraguimov, Dimitri Pappas

2015-05-15 Paper

DOI: 10.1039/C5AN00481K

Nanoporous copper oxide ribbon assembly of free-standing nanoneedles as biosensors for glucose

Shaodong Sun, Yuexia Sun, Anran Chen, Xiaozhe Zhang, Zhimao Yang

2015-05-20 Paper

DOI: 10.1039/C5AN00609K

Real-time detection of hypochlorite in tap water and biological samples by a colorimetric, ratiometric and near-infrared fluorescent turn-on probe

Shuangshuang Ding, Qiong Zhang, Shuanghong Xue, Guoqiang Feng

2015-05-15 Paper

DOI: 10.1039/C5AN00465A

Sensitive, quantitative, and high-throughput detection of angiogenic markers using shape-coded hydrogel microparticles

Mohammad Ali Al-Ameen, Ji Li, David G. Beer, Gargi Ghosh

2015-05-15 Paper

DOI: 10.1039/C5AN00358J

The real-time in vivo electrochemical measurement of nitric oxide and carbon monoxide release upon direct epidural electrical stimulation of the rat neocortex

Sarah S. Park, Minyoung Hong, Yejin Ha, Gil-Ja Jhon, Youngmi Lee

2015-02-25 Paper

DOI: 10.1039/C5AN00122F

Applications of two-dimensional infrared spectroscopy

Amanda L. Le Sueur, Rachel E. Horness, Megan C. Thielges

2015-05-15 Minireview

DOI: 10.1039/C5AN00558B

You might also like

Compound Q&A

What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?

When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...

40716-16-34-Methyl-6-(trifluor...
Compound Q&A

What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?

4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...

405058-00-64-(3,5-Difluoropheny...
Compound Q&A

How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?

5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...

338982-07-35-{[4-(Trifluorometh...
Compound Q&A

What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?

The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...

6317-57-34-Benzylaniline hydr...
Compound Q&A

Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?

[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...

871329-58-7[3-(Diethylsulfamoyl...
Compound Q&A

What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?

3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...

115929-62-93-Bromo-2,5-dimethox...
Compound Q&A

What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?

N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...

915922-67-7N-Methyl-1-(5-methyl...
Compound Q&A

What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?

This compound is primarily used in the pharmaceutical industry for the synthesis...

24828-96-4Carbamic acid, N-[(5...
Compound Q&A

How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?

2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...

1298101-47-92-Methyl-2-propanyl ...
Compound Q&A

What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?

Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...

367-33-9Ethyl 2-bromo-4,4,4-...

Source Journal

Analyst

Analyst
CiteScore: 7.8
Self-citation Rate: 5.6%
Articles per Year: 653

Analyst publishes analytical and bioanalytical research that reports premier fundamental discoveries and inventions, and the applications of those discoveries, unconfined by traditional discipline barriers.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.