Ab initio static and molecular dynamics study of the absorption spectra of the 4-styrylpyridine photoswitch in its cis and trans forms

Literature Information

Publication Date 2010-04-13
DOI 10.1039/B920850J
Impact Factor 3.676
Authors

Latévi Max Lawson Daku, Jorge Linares, Marie-Laure Boillot


View Original

Abstract

We report a thorough investigation of the absorption spectra of the cis and trans isomers of the 4-styrylpyridine photoswitch based on TDDFT calculations. The spectra of both isomers were analysed first from the results of excitation calculations performed on their optimised geometries. The main absorption band of the cis isomer is thus predicted to be due to the S0 → S1 and S0 → S2 transitions, while the main absorption band of the trans isomer is predicted to originate exclusively from the S0 → S1 transition. The convolution of the calculated oscillator strengths with Gaussians helped mimic the broadening of the electronic transitions. However, it proved necessary to use Gaussians with a large full width at half maximum of 5000 cm−1; and, compared to experiment, the calculated main absorption bands of the two isomers are significantly red-shifted and far too symmetric. Consequently, as required for the detailed analysis of the finite-temperature absorption spectrum of a molecule as flexible as 4-styrylpyridine, the influence of the thermal fluctuations has been taken into account by calculating the spectra as time averages over Car–Parrinello molecular dynamics trajectories. For both isomers, this led to a noticeable improvement in the relative positions of the calculated and experimental main absorption bands, and the asymmetry of the calculated bands brings them in better agreement with the experimental ones. Furthermore, these last results show that, actually, the S0 → S1 and S0 → S2 transitions both contribute significantly to the finite-temperature main absorption bands of the two isomers. Finally, in order to also take the vibrational broadening into account, the Franck–Condon factors of the relevant vibrations were calculated within the displaced harmonic oscillator approximation. By thus taking both the thermal and the vibrational broadening into account for the calculation of the absorption bands, the agreement between experiment and theory could be further improved.

Related Literature

Detection of glycosylation and iron-binding protein modifications using Raman spectroscopy

Victoria L. Brewster, Royston Goodacre

2017-02-01 Paper

DOI: 10.1039/C6AN02516A

Correction: In solution SERS sensing using mesoporous silica-coated gold nanorods

Zhe Gao, Nathan D. Burrows, Nicholas A. Valley, Sam Egger, George C. Schatz, Catherine J. Murphy, Christy L. Haynes

2016-11-21 Correction

DOI: 10.1039/C6AN90098D

Thin layered drawing media probed by THz time-domain spectroscopy

A. Taschin, P. Bartolini, J. Striova, R. Fontana

2016-11-21 Communication

DOI: 10.1039/C6AN02113A

Rapid capillary mixing experiments for the analysis of hydrophobic membrane complexes directly from aqueous lipid bilayer solutions

John W. Patrick, Breanna Zerfas, Jianmin Gao, David H. Russell

2016-12-08 Paper

DOI: 10.1039/C6AN02290A

Front cover

Cover

DOI: 10.1039/C6AN90091G

Contents list

Front/Back Matter

DOI: 10.1039/C7AN90003A

DNA biosensing with 3D printing technology

Adeline Huiling Loo, Chun Kiang Chua, Martin Pumera

2016-12-21 Paper

DOI: 10.1039/C6AN02038K

A sub-picomolar assay for protein by using cubic Cu2O nanocages loaded with Au nanoparticles as robust redox probes and efficient non-enzymatic electrocatalysts

Jianmin Zhao, Ting Zheng, Jiaxi Gao, Shijing Guo, Xingxing Zhou, Wenju Xu

2017-01-16 Paper

DOI: 10.1039/C6AN02599D

You might also like

Compound Q&A

What precautions should be taken when handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3)?

When handling 4-Methyl-6-(trifluoromethyl)quinoline (CAS: 40716-16-3), safety go...

40716-16-34-Methyl-6-(trifluor...
Compound Q&A

What is 4-(3,5-Difluorophenyl)aniline (CAS: 405058-00-6)?

4-(3,5-Difluorophenyl)aniline is an aromatic organic compound with the CAS numbe...

405058-00-64-(3,5-Difluoropheny...
Compound Q&A

How is 5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid (CAS: 338982-07-3) typically synthesized?

5-{[4-(Trifluoromethyl)phenyl]sulfanyl}-1,2,3-thiadiazole-4-carboxylic acid can ...

338982-07-35-{[4-(Trifluorometh...
Compound Q&A

What is the market or research trend for 4-Benzylaniline hydrochloride (CAS: 6317-57-3)?

The market for 4-Benzylaniline hydrochloride (CAS: 6317-57-3) is steadily growin...

6317-57-34-Benzylaniline hydr...
Compound Q&A

Is [3-(Diethylsulfamoyl)phenyl]boronic acid (CAS: 871329-58-7) safe?

[3-(Diethylsulfamoyl)phenyl]boronic acid is generally considered safe when handl...

871329-58-7[3-(Diethylsulfamoyl...
Compound Q&A

What are the main uses of 3-Bromo-2,5-dimethoxyaniline (CAS: 115929-62-9)?

3-Bromo-2,5-dimethoxyaniline is mainly used in the pharmaceutical and chemical i...

115929-62-93-Bromo-2,5-dimethox...
Compound Q&A

What regulatory guidelines apply to N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7)?

N-Methyl-1-(5-methyl-1H-indol-3-yl)methanamine (CAS: 915922-67-7) is subject to ...

915922-67-7N-Methyl-1-(5-methyl...
Compound Q&A

What industries use Carbamic acid, N-[(5S)-5,6-diamino-6-oxohexyl]-, 1,1-dimethylethyl ester (CAS: 24828-96-4)?

This compound is primarily used in the pharmaceutical industry for the synthesis...

24828-96-4Carbamic acid, N-[(5...
Compound Q&A

How should 2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) be stored?

2-Methyl-2-propanyl [(1S,3R)-3-aminocyclohexyl]carbamate (CAS: 1298101-47-9) sho...

1298101-47-92-Methyl-2-propanyl ...
Compound Q&A

What industries use Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9)?

Ethyl 2-bromo-4,4,4-trifluorobutanoate (CAS: 367-33-9) is utilized in the pharma...

367-33-9Ethyl 2-bromo-4,4,4-...

Source Journal

Physical Chemistry Chemical Physics

Physical Chemistry Chemical Physics
CiteScore: 5.5
Self-citation Rate: 10.3%
Articles per Year: 3036

Physical Chemistry Chemical Physics (PCCP) is an international journal co-owned by 19 physical chemistry and physics societies from around the world. This journal publishes original, cutting-edge research in physical chemistry, chemical physics and biophysical chemistry. To be suitable for publication in PCCP, articles must include significant innovation and/or insight into physical chemistry; this is the most important criterion that reviewers and Editors will judge against when evaluating submissions. The journal has a broad scope and welcomes contributions spanning experiment, theory, computation and data science. Topical coverage includes spectroscopy, dynamics, kinetics, statistical mechanics, thermodynamics, electrochemistry, catalysis, surface science, quantum mechanics, quantum computing and machine learning. Interdisciplinary research areas such as polymers and soft matter, materials, nanoscience, energy, surfaces/interfaces, and biophysical chemistry are welcomed if they demonstrate significant innovation and/or insight into physical chemistry. Joined experimental/theoretical studies are particularly appreciated when complementary and based on up-to-date approaches.

Recommended Compounds

Recommended Suppliers

Disclaimer
This page provides academic journal information for reference and research purposes only. We are not affiliated with any journal publishers and do not handle publication submissions. For publication-related inquiries, please contact the respective journal publishers directly.
If you notice any inaccuracies in the information displayed, please contact us at support@chemtradehub.com. We will promptly review and address your concerns.